Penstocks Equipment For Water And Wastewater Near Wyoming
-
Manufactured by Obermeyer Hydro, Inc.based in USA
Obermeyer Hydro's submersible pump-turbines create large-scale grid storage opportunities with significant advantages over conventional and ternary-type configurations. Simplified construction and reduced installation costs can tip the scales at sites that were previously ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The water enters the BOXWIP concrete pit through the upstream aperture, flows through the bar rack which is periodically cleaned by a wall-plate mounted “CV” type rake. The wall-plate is slid into the wall ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
Screening is a filtration process which separates solids from liquids. Screening plants face nature. There is, as a result, a measure of uncertainty as to what they have to handle, and a safety margin is ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
A penstock is a small to medium-sized watertight sliding/shut-off device meant to isolate a chamber to dewater it, cut or control flow. It is used in all types of plants where water flows in channels or basins (water intake). They are sometimes referred to as sluice gates, slide gates. They are actuated with a level difference between front and ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The BEAUDREY microstrainer is a horizontal, motor-driven drum screen covered in very fine mesh. It rotates between two wall-plates. The water enters the drum, flows through the mesh on which the particles are arrested. The drum rotates and the particle-laden mesh travels upwards out of the water. On reaching the top, it is back-washed by 1 or 2 low-pressure spray pipes with fantail jet nozzles. ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The HOS/MPR gear operators are manufactured from high quality materials and life tested ensuring that maximum performance, quality and reliability are consistently maintained. Operating temperature normally ranges from -40 ºC to 120 ºC, although other temperature ranges are available on ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IB/AS Combination operators are Multi-turn devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IS operators are Multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Complete range of multi-turn bevel gearboxes with two shafts for use with dual stem sluice gates and ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Series IB operators are multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for the most demanding motorised ...
-
Manufactured by Orbinoxbased in SPAIN
Square or rectangular port sliding wall penstocks sealed on all 4 sides. Used for on-off or control applications in wells, tanks, pipe outlets, etc. Carbon or stainless steel fabricated construction, with tight sealing by means of elastomer ...
-
Manufactured by Orbinoxbased in SPAIN
Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides.Used for on-off or control applications in open channels.Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal. Available in a wide range of dimensions and for many different pressure heads.Actuator: Handwheel, Pneumatic, Electric or Hydraulic, with ...
-
Manufactured by Orbinoxbased in SPAIN
Round swing check gate to be wall-mounted or flanged, intended to prevent backflow and commonly installed at the end of a line, as a check valve. Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal. Available in a wide range of dimensions and for many different pressure heads. May include a counterweight for adjustment and control of the ...
-
Manufactured by ERHARD GmbH & Co. KG - Talis Groupbased in GERMANY
WAGU penstocks and gate valves for shutting- off and regulating in open gutters as well as channel, shafts, tank and pipeline inlets and outlets. Due to the diversity of variants and their special material selection WAGU® valves are particularly suitable for sewage technology, the water industry and flood ...
-
Manufactured by Plasti-Fab, Inc.based in USA
Industrial Slide gates are commonly used in open channel and moderate head applications to isolate equipment, divert flow, close off a wall opening, or cover a pipe that is flush with the wall. Plasti-Fab slide gates are manufactured of gray fiberglass reinforced plastic containing ultraviolet inhibitors. Plasti-Fab penstock is reinforced to withstand the specified maximum operating head. Where ...
-
Manufactured by American Tank Companybased in USA
American Tank Company is an approved applicator for Polibrid Coatings – a field proven coating product for more than 20 years. Polibrid is a solventless, 100% solids by volume elastomeric polyurethane that is applied by plural-component spray equipment at virtually any film thickness at temperatures as low as 25° F. It can be placed in immersion service immediately, providing rapid ...
-
Manufactured by ASL AQFlow Inc.based in CANADA
Once it has been calibrated, the ASFM Monitor provides reliable, accurate and repeatable, long-term real-time monitoring of turbine discharge. It has been developed for use in low-head, short-intake plants, but can be used in higher head plants as well. It is installed on the walls of the intake, and thus can also be used for the detection of trashrack blockage and penstock rupture. If intake ...
-
Manufactured by Bisan Inc.based in CANADA
BISAN represents two of the leading manufacturers of fluid control products with a long and successful installation lists in both Canada and the Middle ...
-
Manufactured by Aqseptence Group GmbHbased in GERMANY
The Passavant Grit Chamber Scrapers is a robust and reliable scraper for the removal of grit sediments and floating scum (such as oil and grease) from longitudinal grit and grease ...
-
Manufactured by Amiblu Holding GmbHbased in AUSTRIA
Centrifugally cast Hobas pipe, typically used for penstocks, irrigation, water mains and other pressure ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you