orp controller Equipment available in Tajikistan

Available in Tajikistan| Near Tajikistan
79 Results found

We couldn't find any orp controller equipment in Tajikistan

Here is a list of results available in Tajikistan

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: pH & ORP Monitoring ×

  • Keyword: orp controller ×

  • Available in: Asia & Middle East ×

  • Available in: Tajikistan ×

Myron L - Model 720 Series II - pH/ORP Monitor/Controllers

by Myron L Company     based in Carlsbad, CALIFORNIA (USA)

The advanced “isolated” circuitry of the 720 Series II pH/ORP Monitor/ controllers guarantees accurate and reliable measurements — completely eliminating ground-loop and noise issues.

DULCOTEST - Model ORP - Sensors

by ProMinent Group - ProMinent GmbH     based in Heidelberg, GERMANY

Measuring range -1,500 … +1,500 mV. ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

IC Controls - Model orp-kit - ORP Calibration Kit

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The ORP calibration kit conveniently packages the requirements for ORP calibrations in the right amounts for easy use. The necessary utensils and accessories, made of durable plastic, are included in the kit. Using this kit you are assured of reliable and accurate results while at the same time the technician's job is made easier.

IC Controls - Model ph-std - pH Buffers

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

Non-NIST pH standards are available with pH values 1.00, 2.00, 3.00, 5.00, 8.00, 9.00, 11.00, 12.00, and 13.00. These have less buffering capacity (resistance to pH change) than HIST and ASTM method buffers. However, they still can provide single-use checkpoints close to the important process endpoint.

IC Controls - Model 655-T - Industrial pH Analyzer

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The industrial pH analyzer model 655-T from IC Controls gives you maximum flexibility, reliability, and ease of use.

IC Controls - Model 654 - Microprocessor ORP Analyzer

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The industrial ORP analyzer from IC Controls, the Model 654, gives you maximum flexibility, reliability, and ease of use.

IC Controls - Model 615-26 - Ultra Pure Water pH Sampling and Calibration System

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

Close spacing between sensor components sharply reduces high impedence and ion effects for stable pH readings. Small internals allow low-flow with fast pH response. Constant atmospheric head establishes steady pH sensor flow even as process pressure varies. Low ionic strength pH buffers minimize junction potential effects on calibration and speed ...

IC Controls - Model 642 - Process Combination pH Sensor

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The IC Controls model 642 pH sensor is a low-cost solution to traditional leakage problems associated with submersible pH sensors. The sensor assembly is designed to work with the electronics package located in a junction box above the liquid level. The assembly is completely encapsulated and comes with a standard 3 meter (10 foot) lead. This ...

HC200 ORP Controller

by Awa Instruments     based in Singapore, SINGAPORE

Durable, compact design, waterproof and comes with LED display.

IC Controls - Model 603 - Modern Sustainable pH Measurement and Control

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The 603 pH or ORP sensor body is made of polypropylene, with the electrode fully encapsulated for outstanding reliability on submersion applications. It mounts on a ¾ inch NPT thread in an insertion tee or fitting, and in the end of a 1' (2.54 cm) support pipe, or can be suspended from its lead. The IC Controls unique patented “solid ...

IC Controls - Model 600 - Industrial pH Interface

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

pH electrode signals can easily be disturbed because the electrode puts out a very tiny signal. Use of an industrial pH interface strengthens the signal so it has a reasonable chance of remaining stable in a plant environment. pH electrodes have a very high impedance which makes their leads like an antenna that easily picks up electrical noise. A ...

IC Controls - Model 627 - Quick-Union pH/ORP Sensor - Resistant to Sulfide, Cyanide and Ammonia

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

This sensor is designed to survive in sulfides, cyanides and ammonia environments often found in Mines, Concentrators and Refineries. It is bigger and more rugged than a conventional pH sensors and lasts 3 to 5 times longer. The patented 'solid polymer' pH reference design is used to give fast response and long life even with constantly ...

IC Controls - Model 650 - Economical Two-Wire pH Transmitter

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

IC CONTROLS brings you economy in a two-wire microprocessor transmitter. The 50-series microprocessor makes these transmitters flexible and easy to use. The transmitter is easy to install in a surface-mounting 10x10x10 cm (4x4x4 inch) size NEMA 4X (IP 65) water-shedding and corrosion-resistant plastic case, which can be supplied with pipe- or ...

IC-Controls - Model 510 - Infra-Red Remote Keypad with Explosion Proof Option

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The 510 remote keypad is required to operate the -9 explosion proof versions of the 53 series of analyzers/transmitters. The 510 is a battery-powered infra-red light based remote control similar to a TV remote. In addition the model 510 has components to make it intrinsically safe. The 510 operates through the front viewing window of the -9 case.

IC Controls - Model 625 - Quick-Union in-line pH Sensor

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The model 625 quick-union in-line pH sensor is offered in an easy-to-install configuration for insertion or submersion applications. The union-style threaded fitting locks in the sensor for extra safety and very easy removal. The model 625 sensor is recommended for applications where frequent removal in tough application for calibration, cleaning ...

IC Controls - Model 615 - Pure-Water pH Sensor

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

Benefits for Pure Water Measurement; Close spacing between sensor components sharply reduces high impedence and ion effects for stable pH readings. Small internals allow low-flow with fast pH response.

IC Controls - Model 606 - SS Body Ball Valve Retractable pH Sensor, with Anti-Blowout Lip

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The IC Controls model 606 was designed to provide reliable pH measurement in demanding applications where pressure cannot be reduced to zero for electrode removal. The IC Controls models 605 and 617 also can handle the service. However, for safety reasons, some users prefer a positive anti-blowout lip that cannot pass through the insertion gland. ...

IC Controls - Model 210-P - Industrial pH/ORP Analyzer

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The industrial pH analyzer model 210-P from IC Controls gives you maximum flexibility, reliability, and ease of use. The pH measurement can be critical to your process and must be strictly monitored and maintained. The 210-P was designed for the highest accuracy and performance standards. The 210-P has two assignable 4-20 mA outputs for trending ...

IC Controls - Model 613 - Reliable pH Measurement in Oily Applications

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The 613 sensor body is Ryton PPS, with the electrode fully encapsulated for outstanding reliability on submersion applications. It mounts on a ¾ inch NPT thread in an insertion tee or fitting, and in the end of a 1' (2.54 cm) support pipe, or can be suspended from its lead. The IC Controls unique patented “solid polymer” pH ...

IC Controls - Model 647 - Submersible pH/ORP Sensor - Resistant to Sulfide, Cyanide and Ammonia

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

This sensor is designed to survive in sulfides, cyanides and ammonia environments often found in Mines, Concentrators and Refineries. It is bigger and more rugged (shown in the left and right) than a conventional pH sensors (shown in the middle) and lasts 3 to 5 times longer. The patented 'solid polymer' pH reference design is used to give fast ...

Need help finding the right suppliers?

Let the XPRTs do the work for you