Only show results in Massachusetts? Ok

pH/ORP Monitoring Applications

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for for Environmental industry

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Fountain solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    ph determination for soil testing

    Determination of the pH value provides information about the acid or base action of the soil solution. This in turn is enormously important for the nutrient supply and microbial activity of the soil. For example, many metals (trace elements) are considerably more mobile in acidic soils. If the soil pH values are very low, toxic levels can soon be reached and these can damage the roots of plants. On the other hand, excessively high pH values quickly lead to a shortage of trace elements because of immobilization.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Solutions for waste water treatment

    Very low-impact treatment for waste water. Our water treatment technology delivers thorough yet environmentally friendly waste water treatment. What`s more, with precisely metered additives and optimised processes, you also save money.

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Water treatment solutions for swimming pool water treatment

    Modern water treatment and disinfection processes enhance swimming enjoyment. The use of metering technology and water treatment solutions may vary considerably depending on the industry and application. Rely on our decades of experience and know-how to find the safest and most efficient solution for you.

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Surface water and water conservancy monitoring solution

    Surface water and water conservancy monitoring is an important foundation work for reasonable utilization and protection of the nation water and soil resources, is a foundation of science management and protection of water ecology, water resources, water safety. The purpose of water quality monitoring is timely, accurate and comprehensive reflection of water environment quality present situation and developing trend, providing scientific basis for water environment monitoring, management, planning, pollution...

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Laboratory Equipment Solutions for Soil Analysis

    MANTECH offers world class laboratory equipment allowing you the flexibility to test your soil samples all the way up to 197 individual positions! Our tests cover Alkalinity, Ammonia, Chloride, Nitrate and pH for soil samples. Learn more about our world class laboratory equipment and applications at http://mantech-inc.com/application-abstracts/agriculture-and-soil-application-abstracts/

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Premium

    Flow and Analysis Measurement solutions for Industry - Food Industry

    Application: Pipe with 0.3 m diameter. Part filled. Pipe made of HDPE. Shift production. Heavy flow fluctuation. Low sedimentation.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Low flow sampling, methodology for groundwater sampling

    When you need to retrieve high-quality groundwater samples, low flow sampling systems provide an excellent way to retrieve accurate results. While the system is fairly new to the UK, it’s many advantages over more traditional sampling systems has seen its popularity in the industry grow rapidly. Low flow sampling works by extracting the water at rates similar to ambient water flow, which in turn minimises the drawdown of the water level.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Advanced water treatment controller solutions for ultima waste water sector

    Waste water treatment is a multi-stage process to neutralise or disinfect wastewater to within regulatory requirements before it is released into the environment. Considering the wide range of waste water streams and associated difficulties, the control system must be reliable, flexible and with a comprehensive range of functions to be activated for each individual treatment requirement.

    By Aquarius Technologies Pty Ltd based in Coopers Plains, AUSTRALIA.

  • Bio-Hydrox for Recreational

    Bio-hydrox is more reactive and more effective than ozone and chlorinated chemicals, more stable, with longer residual activity, does not alter the pH, increases the oxygen content and does not create any toxic byproducts. It is ecological and sustainable. Received NSF ANSI 60 approval in 2013, as a drinking water treatment product for the following uses:

    By Envirocleen LLC based in Libertyville, ILLINOIS (USA).

  • pH/ORP Sensors for Metallurigical Applications

    Importance of pH Measurement - Hydrometallurgical concentrating and refining applications require pH/ORP sensors to withstand aggressive environments while maintaining accurate measurement. Processes such as cyanide leaching (e.g gold) and solvent extraction (e.g. copper, nickel, zinc) require pH and ORP to be at very specific values to yield the desired chemical species. pH may need to be controlled as precisely as ±0.05 for some processes. Even where this level of precision is needed, process environments are...

    By IC Controls Ltd. based in Orangeville, ONTARIO (CANADA).

  • Water quality monitoring systems for public pools & sanitary

    Public health authorities in some countries regulate the quality of water in public pools and control water treatment tightly. A typical installation comprises several instruments with a common web-server for access via intranet or internet.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Process Analytics - Chemical Processes

    METTLER TOLEDO/INGOLD solutions cover a wide range of process conditions found in chemical processes. Our products master even most demanding chemical environments with high temperature and pressure - the industry proven design ensures high safety and reliability. Certificates as ATEX, FM, CSA, 3.1B are available with our products to comply with plant safety requirements. Our application solutions can be integrated into plant wide process control and asset management systems.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Cleaners & assembly lubricants for Laboratory industry

    Whether you need to remove biological debris, fingerprints, protein, starch, or dye, our cleaners provide consistent results. An economical 1-2% concentration in water is effective in most cleaning applications. Our laboratory cleaners are excellent for use on flasks, pipettes, slides, stainless steel, plastic, and other laboratory equipment and surfaces. When rinsed properly, our cleaners leave no residue.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Advanced water treatment controller solutions for ultima cooling tower sector

    The 7” colour touch screen Ultima is professionally designed to deliver appropriate solutions to all operational challenges of cooling towers including corrosion, scale and microbial growth. The comprehensive functions and user friendly navigation of Ultima allow ultimate control of your treatment program.

    By Aquarius Technologies Pty Ltd based in Coopers Plains, AUSTRALIA.

  • Bio-Hydrox for Water Wells

    Need to eliminate iron bacteria? Need to remove Hydrogen Sulfide? Oxidize iron and manganese?. Bio-hydrox is a non-toxic Chlorine alternative advanced oxidation product certified NSF/ANSI 60 and available in the USA market since 2013. It is sometimes called “liquid ozone” because it acts similar to ozone when reacts with water.

    By Envirocleen LLC based in Libertyville, ILLINOIS (USA).

  • Water quality monitoring systems for feedwater, storm & condensate industry

    The most important parameters in Water/Steam Cycles such as Cation conductivity, dissolved oxygen and pH are available as pre-assembled and factory tested units. Dedicated analyzers for sodium, silica, phosphate and hydrazine are also factory tested and calibrated for immediate operation.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you