Only show results available in Virginia? Ok

Hdpe Pipe (Pipe Bursting) equipment

  • HDPE Piping Systems

    Our sales department has the technical expertise to assist in design, supply and installation of HDPE piping systems. Our Idaho fittings plant has the capacity to produce many of the HDPE products that you will need for your project. In addition, our other fitting manufactures complete our fitting line up. Our standard supply is from .75” to ...

    By Hy-Pro Plastics Inc. based in Calgary, ALBERTA (CANADA). from HDPE Pipe & Fittings Product line

  • Model Ram 28 - Electro-hydraulic Butt Fusion Machine

    The RAM 28is an electro-hydraulic butt fusion machine with fusion capabilities ranging from 2' IPS to 8'' DIPS( 75 mm - 225 mm) pipe sizes. It is designed for in-field fusion of HDPE pipe and fittings and other plastic pipes.

    By Pow-R Mole Sales LLC based in Lancaster, NEW YORK (USA). from Pipe Fusion Equipment Product line

  • Model 4 Inch - Standard Head Pulls

    The 4-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a 3/4” cable (optional 5/8” cable) with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • TRIC - Model 6 Inch TL - Lock Head Attaches

    The 6-inch TRIC-Lock head attaches directly to an open end of 6-inch SDR17 pipe, and requires no PE cap or fusion to the new HDPE pipe. The head assembly is pulled by a 3/4” cable with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • Model 2 Inch Standard - Bursting Heads

    The 2-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a 5/8” cable with a 1-1/8” x 7 TPI stud termination. New rounded PE caps offer greater flexibility upon entry. Moles thread on clockwise, and should have a minimum engagement of 2” to 3” (50 to 75 mm).

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • Model 3 Inch - Articulating Head Pulls

    The 3-inch articulating head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a 5/8” cable with a 1-1/8” x 7 TPI stud termination. Moles thread on clockwise, and should have a minimum engagement of 2” to 3” (50 to 75 mm).

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • Model 6 Inch - Standard Head Pulls

    The 6-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a 3/4” cable with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • TRIC - Model 4 Inch - Lock Head Attaches

    The 4-inch TRIC-Lock head attaches directly to an open end of 4-inch SDR17 pipe, and requires no PE cap or fusion to the new HDPE pipe. The head assembly is pulled by a 3/4” cable (optional 5/8” cable) with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • Model 8 Inch - Standard Head Pulls

    The 8-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a swaged cable (7/8”, 1”, 1.125”, or 1.25”) with a 2” x 4.5 TPI stud termination. The PE driver is also the head driver. The new standard 8-inch mole has a narrow 3-inch diameter nose,  and ...

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • Pipe Bursting

    IPR is the global leader in pipe bursting: IPR, through its PM Construction division, is the world leader in pipe bursting. Since 1984, PM Construction has burst more than 15 million feet of damaged water, sewer and industrial pipelines. Superior quality equipment, exceptional project management, and unmatched experience make IPR the simple choice ...

    By Inland Pipe Rehabilitation (IPR) based in Conyers, GEORGIA (US) (USA).

  • Dynamic Pipe Bursting

    Pipe bursting is a preferred technology for maintaining the existing diameter and upsizing existing pipes. It follows the path of the existing pipe and has fewer social costs and causes less traffic disruption than open-trench construction methods.

    By Kembla Watertech Pty Ltd based in Strathfield South, AUSTRALIA.

  • Static Pipe Bursting

    Pipe bursting is a preferred technology for the replacement of fracturable pipes where the existing diameter needs to be maintained or upsized. It follows the path of the existing pipe and has fewer social costs and causes less traffic disruption than open-trench construction methods.

    By Kembla Watertech Pty Ltd based in Strathfield South, AUSTRALIA.

  • Grundosteer - Static Pipe Bursting System

    The self-contained, hydraulically operated Grundoburst static Pipebursting procedure system makes bursting ductile iron and steel pipe possible. With such powerful capabilities, the Grundoburst is having a tremendous impact on the water and gas industries.

    By TT Technologies, Inc based in Aurora, ILLINOIS (USA).

  • Ritmo - Model RAM 28 - Butt Fusion Machine

    RAM 28 is an electro-hydraulic butt fusion machine with fusion capabilities ranging from 2” IPS to 8” DIPS ( 75 mm – 250 mm) pipe sizes. It is designed for in-field fusion of HDPE pipe and fittings and other plastic pipes. RAM 28 is able to weld fittings like elbows, tees, Y - branches and flanges necks. Available in ...

    By Ritmo America LLC based in Lake Wales, FLORIDA (USA). from Butt Fusion Machines Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you