Only show results available in Virginia? Ok

Pipe System (Pipe Bursting) equipment

  • Pipe Mule - Pipe Leveling System

    The patent pending Pipe Mule system from HammerHead makes on-grade pipe ramming a cinch.Align and set your grade up to a pitch of 7° per 20 foot section, using the Pipe Mule system and you’re ready to ram. With a combined lifting capacity of 240 tons, grade and directional adjustments can even be made on the fly on casings up to ...

    By HammerHead Trenchless Equipment based in Lake Mills, WISCONSIN (USA). from Pipe Ramming Product line

  • HDPE Piping Systems

    Our sales department has the technical expertise to assist in design, supply and installation of HDPE piping systems. Our Idaho fittings plant has the capacity to produce many of the HDPE products that you will need for your project. In addition, our other fitting manufactures complete our fitting line up. Our standard supply is from .75” to ...

    By Hy-Pro Plastics Inc. based in Calgary, ALBERTA (CANADA). from HDPE Pipe & Fittings Product line

  • Model GO 6000C - Trenchless Pipe Replacement System

    Each chain operated Trenchless Pipe Replacement System, Model GO 6000C, includes all accessories to complete a 4” and 6” diameter pipe bursting and pipe replacement pull. The complete set-up includes the following five major components; (1) Model 6000 Power Supply ...

    By Gorlitz Sewer & Drain, Inc based in Santa Fe Springs, CALIFORNIA (USA). from Trenchless Pipe Replacement Systems Product line

  • Model GO 6000R - Trenchless Pipe Replacement System

    Each wire rope operated Trenchless Pipe Replacement System, Model GO 6000R, includes all accessories to complete a 4” and 6” diameter pipe bursting and pipe replacement pull. The complete set-up includes the following five major components; (1) Model 6000 Power Supply Cart, (1) Model 6100R Puller Unit, (1) Model 6200 Clamp Fixture, (1) ...

    By Gorlitz Sewer & Drain, Inc based in Santa Fe Springs, CALIFORNIA (USA). from Trenchless Pipe Replacement Systems Product line

  • KMG - Pipe Bursting System

    Is a well-established method for trench less replacement of water pipe, storm water and sewer pipes. An existing pipe is replaced size-for-size or up-sized with a new pipe in the same location. The technique is the most cost effective when there are few lateral connections, when the old pipe is structurally deteriorated, and when additionally ...

    By KMG Pipe Rehabilitation Emirates L.L.C. based in Abu Dhabi, UNITED ARAB EMIRATES. from Other Product line

  • Grundosteer - Static Pipe Bursting System

    The self-contained, hydraulically operated Grundoburst static Pipebursting procedure system makes bursting ductile iron and steel pipe possible. With such powerful capabilities, the Grundoburst is having a tremendous impact on the water and gas industries.

    By TT Technologies, Inc based in Aurora, ILLINOIS (USA).

  • GRUNDOBURST - Model 400S - Static Pipe Bursting System

    For pressure and sewage pipes ND 50-ND 250 up to approx. 100 m length (depending on method). For installation in manholes up to ≥ ND 1000 and in small pits.  Bursting rig length only 60 cm. Bursting rod effective length in manhole: 470 mm. Relatively simple operation inside the manhole. No civil engineering works when working from manhole ...

    By Tracto-Technik GmbH & Co. KG based in Lennestadt, GERMANY.

  • Grundotugger - Lateral Pipe Bursting System

    The Grundotugger lateral pipe bursting system from TT Technologies provides the portability you want and the power you need to burst and replace service laterals, up to 150 feet and more, quickly and easily. This lightweight system (no component over 70 lbs.) includes everything you need for bursting operations including bursting heads for 4- and ...

    By TT Technologies, Inc based in Aurora, ILLINOIS (USA).

  • Grundocrack - Pneumatic Pipe Bursting System

    90% of all the pipe bursting in North America is completed using a pneumatic system. Grundocrack has replaced more than all other systems combined. Superior quality materials and unparalleled experience combine to form Grundocrack the most successful system for the Pipebursting® procedure of all time.

    By TT Technologies, Inc based in Aurora, ILLINOIS (USA).

  • Model SR Series - Bursting Heads

    Our Patent Pending articulating bursting heads, with the magnetically activated quick locking cable system is years ahead of the competition. No tools are required to release cable or pipe from bursting head. Utilizing our articulated pipe bursting head design, our heads provide you with the ability to navigate up to three 45 degree bends in a ...

    By Roddie Inc. based in Columbia Falls, MONTANA (USA). from R2 Pipe Bursting System Product line

  • Fusion Welding Machines

    This compact fusion welding machine is lightweight at only 34 lbs, the entire fusion machine and accessories can easily be stored and transported to and from the job site in the provided rolling toolbox. This machine uses an included Makita powered facing tool.

    By Roddie Inc. based in Columbia Falls, MONTANA (USA). from R2 Pipe Bursting System Product line

  • 1″ Water Tool Accessory Kit

    The water tool kit is a accessory for the R2 system. It makes it possible to replace 3/4 and 1″ copper and plastic water lines using the R2 system. This kit includes a 1″ bursting head, 7/16 cable and grippers and the water tool chassis.

    By Roddie Inc. based in Columbia Falls, MONTANA (USA). from R2 Pipe Bursting System Product line

  • Rope/Cable

    We supply pre-cut cable with welded on ends. Custom cable sizes and lengths available by request.

    By Roddie Inc. based in Columbia Falls, MONTANA (USA). from R2 Pipe Bursting System Product line

  • Model 14M - Butt Fusion System

    The Connectra 14M Butt Fusion System is designed for quick and accurate joining of 3/4” CTS through 4” DIPS polyethylene pipe and valves and fittings, including 25-110mm, using the butt fusion process. Easy-to-use snap-in liners reduce the clamps to the smaller pipe sizes. The joining assembly, heater and facer can be used in the ...

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Pipe Fusion Equipment Product line

  • TRIC - Model M50 - Compact Bursting System

    Contractors on municipal jobs don’t have any time to waste. The TRIC M50 is the perfect combination of size and power for those easements and other tight spots where bigger equipment just won’t fit. Strong enough to burst 8-inch main lines, yet compact enough to set up by hand. Use either a backhoe* or our dedicated high-flow hydraulic ...

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Pulling Units Product line

  • TRIC - Model X30 - Pulling System - Hydraulic Pump

    With formidable power in a super-sleek package, the X30 is your tool of choice to burst pipes up to 6” in diameter.* New refinements make this generation of X-Series pullers the most durable and reliable yet. Designed for minimum maintenance and maximum performance.

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Pulling Units Product line

  • TRIC - Model X20 - Pulling System - Hydraulic Pump

    The X20 is the smallest and lightest of the new super-reliable X-Series pullers. Distinguished by a sleek, monolithic aluminum body first released by TRIC more than a decade ago, the revised X-Series machines feature a steel pulling bridge for extra strength and reliability. Designed primarily to replace 4-inch sewer laterals, the X20 weighs less ...

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Pulling Units Product line

  • TRIC - Model M100 - Pulling System - Hydraulic Pump

    The TRIC formula puts big power in a small footprint, and the M100 is the most formidable example of that formula. Projects with tough ground conditions or limited access are natural candidates for the M100. This unit is designed to burst 8” to 12” municipal sewers as well as other drains and utility lines.* The M100 can be powered by ...

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Pulling Units Product line

  • TRIC - Model V24 - Hi-Flow Hydraulic Pumps System

    The V24 is a stripped-down version of the original TRIC system that started the industry of sewer lateral pipe-bursting back in 1997. Simple, fast, and economical, the V24 pulls directly in-line with the pipe, eliminating the pulley wheel found in the standard TRIC configuration. Geared for higher flow and lower pressure, the unit can run as an ...

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Pulling Units Product line

  • Model SL PP-B - Trenchless Renovation Using Modules Pipe

    The egeplast SL PP-B module is generally suitable for all trenchless technologies. Because of its scratch resistance and ring stiffness it is a perfect choice for technologies offering the possibility for channel widening. SL PP-B modules are principally deployed in single pipe lining, the TIP method and in pipe bursting. In terms of the ...

    By egeplast International GmbH based in Greven, GERMANY. from Sewage (Gravity Pipes) Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you