Pipe Bursting equipment for Water and Wastewater in USA

  • TRIC - Model 4 Inch - Lock Head Attaches

    The 4-inch TRIC-Lock head attaches directly to an open end of 4-inch SDR17 pipe, and requires no PE cap or fusion to the new HDPE pipe. The head assembly is pulled by a 3/4” cable (optional 5/8” cable) with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • Model 6 Inch - Standard Head Pulls

    The 6-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a 3/4” cable with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • Model 8 Inch - Standard Head Pulls

    The 8-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a swaged cable (7/8”, 1”, 1.125”, or 1.25”) with a 2” x 4.5 TPI stud termination. The PE driver is also the head driver. The new standard 8-inch mole has a narrow 3-inch diameter nose,  and ...

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • Model Ram 28 - Electro-hydraulic Butt Fusion Machine

    The RAM 28is an electro-hydraulic butt fusion machine with fusion capabilities ranging from 2' IPS to 8'' DIPS( 75 mm - 225 mm) pipe sizes. It is designed for in-field fusion of HDPE pipe and fittings and other plastic pipes.

    By Pow-R Mole Sales LLC based in Lancaster, NEW YORK (USA). from Pipe Fusion Equipment Product line

  • Model 14M - Butt Fusion System

    The Connectra 14M Butt Fusion System is designed for quick and accurate joining of 3/4” CTS through 4” DIPS polyethylene pipe and valves and fittings, including 25-110mm, using the butt fusion process. Easy-to-use snap-in liners reduce the clamps to the smaller pipe sizes. The joining assembly, heater and facer can be used in the ...

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Pipe Fusion Equipment Product line

  • Model GO 6000C - Trenchless Pipe Replacement System

    Each chain operated Trenchless Pipe Replacement System, Model GO 6000C, includes all accessories to complete a 4” and 6” diameter pipe bursting and pipe replacement pull. The complete set-up includes the following five major components; (1) Model 6000 Power Supply ...

    By Gorlitz Sewer & Drain, Inc based in Santa Fe Springs, CALIFORNIA (USA). from Trenchless Pipe Replacement Systems Product line

  • Pipe Mule - Pipe Leveling System

    The patent pending Pipe Mule system from HammerHead makes on-grade pipe ramming a cinch.Align and set your grade up to a pitch of 7° per 20 foot section, using the Pipe Mule system and you’re ready to ram. With a combined lifting capacity of 240 tons, grade and directional adjustments can even be made on the fly on casings up to ...

    By HammerHead Trenchless Equipment based in Lake Mills, WISCONSIN (USA). from Pipe Ramming Product line

  • Ritmo - Model RAM 28 - Butt Fusion Machine

    DELTA 250 TRAILER is an electro-hydraulic butt fusion machine with fusion capabilities ranging from 2” IPS to 8” DIPS ( 75 mm – 250 mm) pipe sizes. It is designed for in-field fusion of HDPE pipe and fittings and other plastic pipes. RAM 28 is able to weld fittings like elbows, tees, Y - branches and flanges necks. Available in ...

    By Ritmo America LLC based in Lake Wales, FLORIDA (USA). from Butt Fusion Machines Product line

  • Grundoram - Pneumatic Pipe Ramming

    Whatever direction your work takes you, Grundoram can handle it . . . from conventional horizontal pipe ramming to vertical pile driving. The Grundoram pneumatic ramming tool is used for the trenchless installation of steel pipe through a wide variety of soil types, without any rise or fall in the ground’s surface. Some casing installation ...

    By TT Technologies, Inc based in Aurora, ILLINOIS (USA).

  • HydroGuide - Model HG12 - Auto Boom Winch

    Hammerhead HydroGuide HG12 winch is designed to maximize efficiency and minimize setup time and effort for pipe bursting, slip lining, pipe pulling, cable pulling and swage lining projects. Setup and tear-down can be performed in minutes, not hours. Once setup is complete the HG12 offers 12 tons (11 tonnes) of pulling power for a wide range of ...

    By HammerHead Trenchless Equipment based in Lake Mills, WISCONSIN (USA). from Hydroguide Winches Product line

  • Fusion Welding Machine

    This compact fusion welding machine is lightweight at only 34 lbs, the entire fusion machine and accessories can easily be stored and transported to and from the job site in the provided rolling toolbox. This machine uses an included Makita powered facing tool.

    By Roddie Inc. based in Columbia Falls, MONTANA (USA). from R2 Pipe Bursting Machine Product line

  • Bursting Heads

    Our articulating bursting heads, with a magnetically activated quick locking cable system, are years ahead of the competition. No tools are required to release the cable or pipe from the bursting head.

    By Roddie Inc. based in Columbia Falls, MONTANA (USA). from R2 Pipe Bursting Machine Product line

  • TRIC - Model V24 - Hi-Flow Hydraulic Pumps System

    The V24 is a stripped-down version of the original TRIC system that started the industry of sewer lateral pipe-bursting back in 1997. Simple, fast, and economical, the V24 pulls directly in-line with the pipe, eliminating the pulley wheel found in the standard TRIC configuration. Geared for higher flow and lower pressure, the unit can run as an ...

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Pulling Units Product line

  • PowerTeam - Model 1.25 - Hydraulic Pump

    At Your Service…If you want to test the durability of a product, rent it to a plumber. Louise is a star performer in the TRIC rental fleet, and has rescued a good many local pipebursting jobs. Ultra-compact and reliable, this model is best matched with our small pullers. Just plug it in and get to work!

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Hydraulic Pumps Product line

  • Grundotugger - Lateral Pipe Bursting System

    The Grundotugger lateral pipe bursting system from TT Technologies provides the portability you want and the power you need to burst and replace service laterals, up to 150 feet and more, quickly and easily. This lightweight system (no component over 70 lbs.) includes everything you need for bursting operations including bursting heads for 4- and ...

    By TT Technologies, Inc based in Aurora, ILLINOIS (USA).

  • Model 4 Inch - Standard Head Pulls

    The 4-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a 3/4” cable (optional 5/8” cable) with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • TRIC - Model 6 Inch TL - Lock Head Attaches

    The 6-inch TRIC-Lock head attaches directly to an open end of 6-inch SDR17 pipe, and requires no PE cap or fusion to the new HDPE pipe. The head assembly is pulled by a 3/4” cable with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Bursting Heads Product line

  • McElroy PitBull - Model 26 - Fusion Machine

    The McElroy PitBull 26 model fusion machines are designed to butt fuse polyethylene pipe as well as tees, ells and other fittings. If fusing other thermoplastic pipe materials, refer to the pipe manufacturer’s fusion procedures or appropriate joining standard. The PitBull 26 fuses 2” IPS through 6” DIPS (63mm through 180mm).

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Pipe Fusion Equipment Product line

  • Grundocrack - Pneumatic Pipe Bursting System

    90% of all the pipe bursting in North America is completed using a pneumatic system. Grundocrack has replaced more than all other systems combined. Superior quality materials and unparalleled experience combine to form Grundocrack the most successful system for the Pipebursting® procedure of all time.

    By TT Technologies, Inc based in Aurora, ILLINOIS (USA).

  • Flo-Press - Hydraulic Ram Press

    The Enviro-Care Flo-Press is a dependable versatile dewatering addition to any screenings operation.  It can accept screenings from a single screen or discharge from a multiple screen hopper or conveyor. Several configurations of discharge piping are available for those awkward locations where straight line conveying is not possible.  ...

    By Enviro-Care Company based in Gurnee, ILLINOIS (USA). from Grit & Solids Management Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you