Pipe Cleaning Equipment For Water And Wastewater Available In Solomon Islands
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Specifications: 30 membranes 8". 125 HP stainless steel RO pump. Weight: 4650 lbs. (2114kg). Size: 290x52x67 inch. (736x132x170 cm). 4” feed connection. 2.5” product connection. 3” reject ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
We have developed an optional intelligent program for our machines. It is equipped with a frequency inverter specifically designed for the motor, which guarantees low energy consumption. It operates as a stand-alone machine that does not require any configuration or parameterization, just plug and play. The TR-Smart integrates a data logger based on historical values, which calculates the optimal ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The new Gecko 8030 self-leveling color sewer camera is the heaviest and strongest push camera that we sell. This German made system has been designed to be used in large diameter applications to access deep areas, including pipes up to and over 20” in diameter, with lengths up to 140 meters (460 ft.). These are ideal for plumbers, pipe or duct cleaning companies, and municipalities running ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 702 high-pressure plunger pump provides a max. operating pressure of 650 bar and a max. flow rate of 209 l/min. The ultra high pressure pumps of the 02-series with operating pressures up to 750 bar and flow rates up to approx. 230 l/min, are ideal for the cleaning of pipes and tube bundles, vessels and containers. The seal system of this plunger pump is very easy to maintain due to fewer ...
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Specifications: 40 membranes 8". 150 HP stainless steel RO pump. Weight: 7300 lbs. (3319 kg). Size: 290x52x67 inch. (736x132x170 cm). 4” feed connection. 3” product connection. 4” reject ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Hospitals, hospices, medical clinics, veterinarians, etc., routinely dump contagious pathogens into the sewers and drains daily. Now, after decades of doing so, many of these dangerous pathogens are not only living, but thriving and multiplying in the sewer pipes and manholes where your team works. The newest medical studies have caused a significant increase in the level of concern by the CDC, ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Easily Configured for Multiple Jobs. Use with .5”, .75” High Pressure Swivel. Product Includes: Carrying Case, .Mini Chain, Cutter, 75” HP Swivel, Leader Hose**, and Owner’s Manual. Clean with Soap and ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Standard Nozzles are KEG’s Tier One Nozzles that come with factory drilled orifices. For small, residential applications, these nozzles are typically used. Standard Nozzles have a one year warranty. Standard Nozzles fit .25” to 1.25” hoses and will work effectively in 2” to 12” ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The purpose of the inserts gives the ability to dial in the nozzle to the specific flow rate, and pressure rating needs to complete any jetting ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Stainless Steel Construction. Water Driven Design. High speed, High Torque. Easily Configured for Multiple Jobs. Roller Chain is Forgiving on Pipe Walls. Operates in Egg-shaped Pipe. Changeable Cross Cutter and Rotating Inserts. Product Includes: Carrying Case, Tools and Owner’s Manual. Clean with Soap and ...
-
PremiumManufactured by TRIC Tools, Inc.based in USA
The 6-inch TRIC-Lock pipe bursting heads directly attach to a 6-inch SDR17 pipe’s open end without fusing to the HDPE replacement pipe or requiring a PE cap. The TRIC-Lock assembly pulls via an open shackle termination and a 3/4“ cable. The head assembly’s pulling eye attaches to the shackle-pin via a hinge, enabling entry in tight ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Triple Edge Quattro Nozzle is an excellent penetrating nozzle for a variety of applications. Deformed pipes, sand, mud, roots, trash, or other blockages inevitably yield to this high-performance nozzle. The combination of four forward jets and sharp edges of the Triple Edge Quattro make it an ideal selection for total blockage removal. Triple Edge Quattro Nozzles have Tier One and Tier Two ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Mercury determination in the trace and ultratrace range. Efficient - automated and time-controlled flow injection technology. Safe - bubble sensor, optimized drying membrane and cascade enrichment. Effective - low reagent consumption, short measurement ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
This handy product allows the user to place the insert holder in the orifice and add a small insert when the original sized insert is not available. This product acts as an insert sleeve allowing for the use of a smaller insert to be placed within the holder for nozzle ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Tight water pattern for efficient cleaning and pulling. Unique Vibrating ‘Jackhammer’ Action. Replaceable Titanium Ceramic Inserts Included. Stainless Steel Inserts Only Available for .375” and .25”. Safer than Cutting and Milling. Less Chance of Damaging Pipes. Designed to be Used as a Leach Aid Remover for ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The WOMA TD3000-SCS Turbo nozzle is a specialist for high removal rates when treating surfaces. WOMAs turbo nozzle TD3000-SCS is a highly efficient water tool with a rotating nozzle carrier head. It is suitable for both surface cleaning as well as pipe cleaning. The speed of the turbo nozzle is infinitely adjustable and provides a high removal ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Multiple Applications with One Nozzle. Cuts with Water Rather than Chain. Controlled Rotational Speed. Expansion Kit up to 24” Pipe Diameter (Available). Individual Jets for Cleaning, Propulsion, Penetration, & Rotation. Rear Jets can be Plugged and Forward Jets Open to be Used for Manhole ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Deposits in water systems, especially in heat exchangers may cause significant heat transfer reduction which may lead to loss of efficiency and so cooling ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
It is a stainless steel nozzle designed with a handle assists in washing down the maintenance hole, debris tank, the truck, and even used in lift stations to blast grease from walls and pumps. For the operator’s safety, this hose should not be used over 600 ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Y connector is a necessary tool used in Twin Nozzle operation for larger pipes. This connection tool allows dual use for Floor Cleaners and OMG ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you