Pipe Lining Equipment For Water And Wastewater In Sweden
-
PremiumManufactured by Presona ABbased in SWEDEN
Presona offers the total solution for rational and effective handling of production waste from the graphic industry, from paper and cardboard manufacturers and from the packaging industry. The Presona waste extraction plant always builds on the same principle. Each specific plant is customized with respect to required air and material flow capacity, number of suction points etc. We offer the ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Point level switch for liquids in high-temperature applications. Liquiphant FT70 is a point level switch for use in hazardous areas with all international certificates. FTL70 is especially designed for applications with high process temperatures up to 280°C and can be used for Safety Instrumented Systems up to SIL2, in homogeneous redundancy up to SIL3. An integrated second line of ...
-
Manufactured by Inpipe Sweden ABbased in SWEDEN
Flex liner means you can easily reline pipes of different dimensions or ...
-
Manufactured by Boldan OYbased in FINLAND
With Boldan's drill and milling equipment, opening a lined branch sewer can also be done via the main sewer. You will always find the right equipment to successfully and quickly cut open any lined branch pipe. Cutting robots enable us to open feeder lines to pipes conveniently through the main line. Our selection includes the most powerful cutting robots equipped with turning milling ...
-
Manufactured by Sulzer Ltd.based in SWITZERLAND
The Piranhamat 701-1002 is a flood-proof double lifting station for automatic sewage pumping from areas below the backwash level in accordance with EN 12050-1. It provides reliable and economical discharge of wastewater under pressure using small-diameter ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Permeate output 2,000 – 50,000 l/h. Reverse osmosis system Dulcosmose BW is the standard model for the modern desalination of brackish water. Equipped with the latest generation of "high rejection low-pressure" diaphragms, this system achieves maximum permeate output with moderate operating pressures, thereby lowering investment and operating ...
-
Manufactured by PermAlert, a division of Perma-Pipe, Inc.based in USA
The PHLR series probe is a resettable hydrocarbon probe that detects hydrocarbon liquids in interstitial spaces of tanks and pipes, sumps and other containment areas where hydrocarbon liquid can accumulate to a depth of ¼” or ...
-
Manufactured by Inpipe Sweden ABbased in SWEDEN
What’s under the surface? We are dependent on an efficient pipeline network for water and drainage. We need clean water for our homes for drinking and food preparation and for other things like washing and ...
-
Manufactured by Boldan OYbased in FINLAND
The calibration roller ensures that the epoxy is spread evenly throughout the liner. From our selections, you will find both electronic and manual calibration rollers for all your pipe lining ...
-
Manufactured by Inpipe Sweden ABbased in SWEDEN
Standard liner is suitable for your most common pipe dimensions. It is good value for money, soft, smooth and simple to handle during installation. The liner is available in SN1 to SN5 depending on diameter Available in Ø150 mm-Ø1500 ...
-
Manufactured by Boldan OYbased in FINLAND
Flexible high-quality liners help you line any pipe. Boldan offers liners in numerous sizes, from 30 mm to 500 mm in diameter. Our flexible liners mean you can even line pipes that have change in diameter in the section being lined. Our selection also includes unique two-sizes flexible ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Point level switch with extension tube for liquids in high-temperature applications.Liquiphant FTL71 is a point level switch with extension tube for use in hazardous areas with all international certificates. FTL71 is especially designed for applications with high process temperatures up to 280°C and can be used up to SIL2, in homogeneous redundancy up to SIL3. An integrated second line of ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Measuring ranges: 0.05 – 10 mg/l and 0.1 – 20 mg/l. Precise measurement of dissolved oxygen with DULCOTEST sensors – very wide range of applications, from the monitoring of water rich in oxygen, including surface water or potable water, to the reliable control of minimal oxygen concentrations when aerating aeration tanks in clarification plants. ...
-
Manufactured by ETG Risorse e Tecnologia S.r.l.based in ITALY
Regarding the problem of monitoring diffuse emissions, or of the leaking in gas pipelines, ETG Risorse in collaboration with NIMBUS has developed a drone for GHG diffusing emission monitoring, simplifying this type of analysis for the end customer. This system, equipped with a sensor with TDLAS (tunable diode laser absorption spectroscopy) technology, is able to detect methane concentrations ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you