Pipe Lining Equipment For Water And Wastewater In Missouri
-
based in USA
Aqua-Pipe is a stand-alone structural liner, designed and manufactured to be cured inside 6-inch to 16-inch water mains, eliminating the need to use the more costly and disruptive 'dig-and-replace' method of pipeline rehabilitation. Aqua-Pipe differs from liners used in alternative types of cured-in-place pipe (CIPP) technology in that it was developed specifically for use in drinking water ...
-
Manufactured by Trenchless Equipmentbased in USA
TRENCHLESS EQUIPMENT PIPE BURSTING POWER SOURCE TRENCHLESS EQUIPMENT SOLUTION SPECIFICATIONS THE PBP50 PIPE BURST SYSTEM. Hydraulic Pullers are the key component to a successful pipe bursting job. Trenchless Equipment (TE) is the Exclusive Distributor for Pipe Bursting Parts (PBP) line of equipment. The PBP hydraulic unit pulls a wire rope connected to a bursting head in the pipe, bursting or ...
-
Manufactured by PortaFabbased in USA
Productive cleanroom environments which require extensive bulkheading can be achieved with the FabLine Framed 500. The 0.50" thick (12mm) wall panel provides a flush wall surface on one side ideal for mechanical and plenum chase applications. They can also be easily removed from either the front or back without disturbing adjacent panels, ceiling or the framing stud. And for construction ...
-
Manufactured by Pure Technologies - a Xylem brandbased in CANADA
Yielding the highest resolution pipe wall loss data in the industry, Magnetic Flux Leakage (MFL) is a highly advanced method of non-destructively assessing the condition of metallic pipelines. Magnetic Flux Leakage (MFL) is a method of non-destructive testing that is used to detect corrosion and pitting in metallic pipelines. Pure’s inline MFL tools scan the full circumference and length of ...
-
Manufactured by Pure Technologies - a Xylem brandbased in CANADA
Prestressed Concrete Cylinder Pipe (PCCP) consists of a concrete core, a thin steel cylinder, high tensile prestressing wires and a mortar coating. The concrete core is the main structural load-bearing component with the steel cylinder acting as a water barrier between concrete layers, the prestressing wires produce a uniform compressive pressure in the core that offset tensile stresses in the ...
-
Manufactured by Trenchless Equipmentbased in USA
Hydraulic Pullers are the key component to a successful pipe bursting job. Trenchless Equipment (TE) is the Exclusive Distributor for Pipe Bursting Parts (PBP) line of equipment. The hydraulic unit pulls on a wire rope connected to a bursting head in the pipe, bursting or splitting the pipe and moving the soil back so the replacement pipe can slide into place. The strength and size of the ...
-
Manufactured by Pittsburgh Pipebased in USA
When your underground project is in a tricky location that doesn’t allow for welding, split casing pipe is the answer. Split casing or a split pipe sleeve for emergency repair, relocation, and expansion are all done by our skilled staff to provide the pipe fix you need as soon as possible. Pittsburgh Pipe has manufactured split steel casing pipe, also known as split steel conduit, for over ...
-
Manufactured by Aegion Corporationbased in USA
United Pipeline Systems developed the Tite Liner® system in 1985. Since then, over 80 million feet of pipelines have been lined with our internal pipe lining ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Hydro-X Triple Edge Quattro Nozzle is an excellent penetrating nozzle used for excavation, root systems removal, and dirt extraction in tight spaces. This nozzle’s unique design of four forward jets provides the perfect angles to cut through debris, allowing the operator to work within a small ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Hydro-X Hand Injector Nozzle provides the capability of water flow up to 25 GPM and up to 4000 PSI. Hand Injector’s single jet cuts through roots faster because of the water pressure through the jetted ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Virtually eliminates blowing toilets with 12 forward jets that equalize air pressure in the ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Hydro-X Twister Nozzle can dig safer within tight spaces without damaging underground resources. This unique oscillating excavation jet allows the operator to use in all digging environments, such as piping systems, ground utilities, and ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Plastic skids are designed to make the chain cutter lighter; creates less drag and protects the lining of the ductile iron lining and PVC piping, which will not scratch piping. These plastic skids also protect the pipe lining from breaking during cleaning vibration. Stainless steel skids are the standard application of all chain cutters and are a durable option to handle heavy-duty tasks. Chain ...
-
Manufactured by Calgon Carbon Corporationbased in USA
The Calgon Carbon Dual Module is specifically designed to provide a full scale, industrial quality adsorption system on short notice or for temporary service. The system applies carbon adsorption technology for the removal of dissolved organic contaminants from water, wastewater or other liquids. ...
-
Manufactured by Calgon Carbon Corporationbased in USA
The Calgon Carbon Model 8 is an adsorption system designed for the removal of dissolved organic compounds from water or other liquids using granular activated carbon. The modular design concept allows for selection of options or alternate materials to best meet the requirements of the site and treatment ...
-
Manufactured by CIPP Corporation, Inc.based in USA
Aged, deteriorated and neglected potable water lines have posed expensive repair costs and great loss of valuable assets up until now. No more extensive digging. No more labor-intensive line removal and replacement. The CIPP Corporation "CIPP H2O" offers an exclusive solution when drinking water lines need attention. ...
-
Manufactured by Calgon Carbon Corporationbased in USA
The Calgon Carbon MODEL 14 is an adsorption vessel designed for the removal of dissolved organic contaminants, including disinfection byproducts (DBP) or natural organic matter (NOM) from liquids using granular activated carbon (GAC). The vessel is sized to hold 60,000 pounds of GAC which provides the additional contact time required to remove either compounds at low concentrations or poorly ...
-
Manufactured by PULSCO Inc.based in USA
Our Line Silencers are used to control noise produced by valves in piping systems. The line silencer is close-coupled with the control or pressure reducing valve and reduces the aerodynamic noise resulting from gas or vapor turbulence. In addition to providing the required back pressure on the valve, each line silencer is designed to attenuate the noise level by 25 ...
-
Manufactured by Calgon Carbon Corporationbased in USA
The Calgon Carbon Model 10 is an adsorption system designed for the removal of dissolved organic contaminants from liquids using granular activated carbon. The modular design concept allows the selection of options, additional accessories or alternate materials to best meet the requirements of the site and treatment ...
-
Manufactured by Calgon Carbon Corporationbased in USA
Calgon Carbon's Dual Express is a carbon adsorption system specifically designed to provide a rapid solution to a temporary problem. For emergency situations where quick response is critical, it can be dispatched to a customer's site within hours of notification and operation can begin immediately after set-up. Calgon Carbon personnel are available to supervise system start-up. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you