Pipe Repair Equipment For Water And Wastewater Available In American Samoa
-
ShowcaseManufactured by Sauereisen Inc.based in USA
Sauereisen SewerGard 210FS is a fast-setting epoxy material for use in municipal wastewater environments. This lining protects concrete surfaces from chemical attack and physical abuse. It is particularly useful for protection of manhole benches, inverts and other structures subject to very little maintenance ...
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Science of Process Gas Flow Metering Advanced, Future Ready! ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST), with the industry's most advanced flow sensors to achieve a truly state-of-the-science flow metering solution for industrial processes ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
Eliminate the need for an inspector to enter a challenging/dangerous environment with this commercial-grade industrial inspection drone that makes inspections safer, effortless, and more informative than ever before. The SKYCOPTER COBRA drone with protective cage is ruggedly constructed for flying in potentially dangerous, confined areas and GPS-denied locations, such as tanks, culverts, nuclear ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Models ST51 and ST51A are a compact, low cost solution for accurate, repeatable flow measurement of biogas, digester gas, landfill gas, methane and natural gas as well as air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Structured packings MASSdek are high-capacity fills for chemical and physical absorption, desorption and for bio scrubbers. In view of their excellent compression strengths, they are also well suited for bio trickling filters. Due to the special configuration of the fill, a uniform distribution of liquid is maintained under both high and low hydraulic ...
-
PremiumManufactured by F.A.S.T. GmbH - Groupe Clairebased in GERMANY
To be applied as monitoring system (lift & shift / permanent / network) and as multi-sensor correlator. Most simple programming with tablet and servicemaster. Free aza-oad software with automatic updates. Available in various sizes, versions, and types of ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
These American-made industrial grade pole-mounted inspection cameras help personnel safely and effectively inspect confined spaces, or areas that are too dangerous for workers to physically enter. Inspections can be safely conducted in underground vaults, truck and rail tankers, manholes, and storage vessels – from outside the space, avoiding direct entry. These can also be used for ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a universal flow switch and flow monitor designed for simple insertion into ½” (13mm) or larger diameter pipes and square ducts. The unit is suitable for either liquid or air/gas applications. It is fast responding and highly repeatable to both increasing and decreasing flow rate changes. The standard 1A relay trip point is easily set in the field for low or high trip ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The new Gecko 8030 self-leveling color sewer camera is the heaviest and strongest push camera that we sell. This German made system has been designed to be used in large diameter applications to access deep areas, including pipes up to and over 20” in diameter, with lengths up to 140 meters (460 ft.). These are ideal for plumbers, pipe or duct cleaning companies, and municipalities running ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected into the pipe via a 1/2 inch or 3/4 inch NPT compression ...
-
ShowcaseManufactured by Mobile Power Equipment, LLC (MPE)based in USA
50 mm/1.96" in camera head, 700TVL resolution. Pan and tilt view head. 6-wheel crawler body for 100mm to 600mm. Crawler body for 100mm to 600mm pipes. 12.1" inch display controller (256GB hard disk). Remote control box. l20m/4.72" in cable reel with counter. Includes keyboard and mouse. 110/220V power supply. 48V battery optional. Cable guide appropriate for manhole and underground control. Hook ...
-
PremiumManufactured by Environics, Inc.based in USA
The Water Vapor Gas Standard Generator is an exciting product from Environics with a tradition of over 25 years of use in the field. Units are specifically designed to generate accurate and repeatable moisture gas standards to your exact specifications. The standard configuration is a passive system. Units are custom designed based on the concentrations and flows your application requires. ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Skids are required for use on the Aluminum Traction, Cleaning, Torpedo, and Royal Nozzles, or the nozzle warranties will be voided. The aluminum skids with holes have a drag consistency, which is lighter, making it more maneuverable and easier to operate. Aluminum skids with holes use less flow and less ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Plastic Porcelain No. 30 is an inorganic, chemically-setting, magnesium oxide base material which expands slightly while hardening to a porcelain-like body. No. 30 is used for assembling silverware and cutlery, insulating lead wires on electrical fixtures and sealing conduits to prevent the spread of explosive ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted flow profiles and lack of straight-run that can lead to inaccurate and ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Non-contact flow measurement for wastewater treatment plants, sewers and industrial water channels. The SQ-R measures continuously and contact-free the flow rate of effluent channels, partially filled pipes and technical ducts in industry and water supply. The SQ-R is not in contact with the water and can therefore be operated without being affected by debris and entrained solids. With its ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
Powerful high-end touchscreen correlator designed specifically to find leaks on large diameter pipes over long distances – intelligent, non-intrusive and user-friendly. This correlator is currently the most advanced correlator in the ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features the same output signals offered in the gas meter (listed above) with an adjustable insertion length using a removable compression fitting. Ideal for air applications, particularly HVAC duct installations. Standard input power is 9 to 36 Vdc. Wetted parts are 300 series stainless steel with a nylon or stainless steel compression fitting ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-CLIMB Floating Ladder System is designed to reduce accidents and allow easy and safe access into sewer manholes, tanks, basins and any structure where a ladder is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you