Pipe Sealing (Pipe Sealing) Equipment
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Pen-Seal is designed to provide a gas and water-tight seal. All sizes have been tested to withstand a hydrostatic seal up to 20 psig or 40 feet of head pressure, in addition to withstanding temperatures up to 250 °F. The Pen-Seal’s standard elastomer material is EPDM, but a Nitrile material is available if the ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
The plugs are used to make hydro testing up to 16 bar until 70 degrees, being the double seal allows them to test up to higher pressures up to 16 and more if requested. They have sturdy and lasting with a chemically resistant neoprene gasket They can be useful not only for temporary usage but also for permanent usage. They can be easily ...
-
Manufactured by VIP Polymers Ltdbased in UNITED KINGDOM
VIP-Polymers offer a range of seals for GRP pipes suitable for a wide range of applications. VIP-Polymers GRP pipe seals can be supplied in a number of stock elastomeric compounds designed to comply with the latest EU and worldwide regulations. Where a suitable compound is not readily available to facilitate bespoke compound ...
-
Manufactured by VIP Polymers Ltdbased in UNITED KINGDOM
VIP-Polymers manufacture a wide range of seals for smooth wall and corrugated pipes for both drinking and dirty water ...
-
Manufactured by DS Dichtungstechnik GmbHbased in GERMANY
DS BL-R is a sealing ring made from elastomers with dense structure for the DS BL-R plug-in socket, a connection for concrete pipes and reinforced concrete pipes according to DIN EN 1916 and DIN V 1201, whereby the seal is firmly embedded in the socket during manufacture of the pipe. ...
-
Manufactured by M.O.L. Gummiverarbeitung GmbH & Co. KGbased in GERMANY
The M.O.L. INTEGRA concrete pipe seal is integrated into the socket and guarantees a firm, reliable connection between concrete pipes and reinforced concrete pipes in compliance with DIN EN 1916. In addition the INTEGRA seal meets the requirements of EN 681-1 and the FBS quality guideline QR ...
-
Manufactured by M.O.L. Gummiverarbeitung GmbH & Co. KGbased in GERMANY
The M.O.L. INTEGRA V concrete pipe seal is integrated into the socket and guarantees a firm, reliable connection between concrete pipes and reinforced concrete pipes in compliance with DIN EN 1916. In addition the INTEGRA V seal meets the requirements of EN 681-1 and the FBS quality guideline QR ...
-
Manufactured by M.O.L. Gummiverarbeitung GmbH & Co. KGbased in GERMANY
The M.O.L. Integra Anker concrete pipe seal is integrated into the socket with double anchoring and guarantees a firm, reliable connection between concrete pipes and reinforced concrete pipes in compliance with DIN EN 1916. In addition the Integra Anker seal meets the requirements of DIN EN 681-1 and the FBS ...
-
Manufactured by DS Dichtungstechnik GmbHbased in GERMANY
DS BL-T is a sealing ring made from elastomers with dense structure for the DS BL-T plug-in socket, a connection for concrete pipes and reinforced concrete pipes according to DIN EN 1916 and DIN V 1201, whereby the seal is firmly embedded in the socket during manufacture of the ...
-
Manufactured by VIP Polymers Ltdbased in UNITED KINGDOM
VIP-Polymers have developed a range of specially formulated EPDM and NBR (Nitrile) compounds to suit modern clay pipe applications, all of which are manufactured in accordance with EN681-1 and meet or exceed the requirements of EN295-1. Today our clay pipe seals are selected as original equipment by a number of the leading global clay ...
-
Manufactured by Mantova Gomma Srlbased in ITALY
Lip seals for PVC sewer ...
-
Manufactured by Effective Enviro Solutionsbased in INDIA
Fully automatic PLC controlled operation with hands free operation. Eliminates the use of connector completely. Suited for both round and flat drip pipes as per IS 13488. Welds joints of drip pipes from 0.15mm (6 mil) to 0.4mm (16 mil) thickness. Joining time varies from 20 to 40 sec / joint as per thickness. Total leakproof joint. ...
-
Manufactured by Trelleborg Pipe Seals Duisburg GmbHbased in GERMANY
Integrated seal cannot be displaced during transportation & installation. Greater joint reliability due to joint tolerance reduction. Traditional Rieber style seal for IPS ...
-
Manufactured by Schoenbeck GmbH & Co. KGbased in GERMANY
It is extremely important that stone clay pipes are water-tight sealed in order to prevent and environmental sewage polution. Various pipe seals can be utilised pending the market that is being targeted. A system that we offer is based on the "K" pipe sealing. This type ...
-
Manufactured by Kurbo Company Limitedbased in SOUTH KOREA
Kurbo Pipe Penetration Seal is designed to seal pipes passing through walls, floors, tanks. It absorbs all axial, lateral and angular movements caused by medium pipes or by an equipment/structure. Kurbo pipe penetration seals are available in two types: Type 90A is designed for ...
-
Manufactured by Xiamen Erikeke Industrial Co.,Ltdbased in CHINA
Drilling UPVC White Water Well Casing Pipe Thread Sealed PVC Pipe 1. Resistant erode PVC pipe has stable chemical property, which can resistant most of acid and alkali. 2. Service life long Traditional pipe service life is 20-30 years. PVC pipe service life is at least 50 years at a set ...
-
Manufactured by Avon Engineered Fabrications , LLC (AEF)based in USA
Nothing temporarily closes a cavity or seals an opening better than an inflatable plug. PIPE PLUGGERS are heavy duty, inflatable pipe plugs especially designed for use during the construction, maintenance, and repair of pipeline, ducts, and ...
-
Manufactured by Sylmasta Ltdbased in UNITED KINGDOM
Wrap & Seal Pipe Burst Tape is a waterproof pipe repair tape made from self-fusing silicone which seals live leaks on pipes made from copper, PVC plastic, steel, malleable iron, and many other materials. ...
-
Manufactured by DS Dichtungstechnik GmbHbased in GERMANY
The DS NVD is a adjustable seal element which ist developed for intermediate pressure ...
-
Distributed by 4 pipes GmbHbased in GERMANY
Casing End Seals 4 Pipes For safety reasons carrier pipes are frequently installed inside casing pipes. The elastomeric Casing End Seals serves a sealing against moisture and dirt between the casing and carrier pipe, so that the annular space is kept dry in order to reduce the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you