Pipe Sealing Equipment For Water And Wastewater
-
Manufactured by Flour Valvebased in ITALY
Flour Valve cast steel valves are designed and manufactured to provide maximum service lire and dependability. All gate valves are full ported and meet the design requirements of American Petroleum Institute Standard API 600 & API 6D, British Standard BS 1414 & BS EN 1984 and generally conform to American Society of Mechanical Engineers standard ASME B16.34. Valves are available in a ...
-
Manufactured by FUHR GmbHbased in GERMANY
The FUHRMATIC belt filters have a filter-bed ordered at an angle. By the higher hydrostatic pressure better throughput performances, more effective cake formation and quite a long stand times therefore arise. The filter belt seals up independently and is raised with a windlass at the filter exit on a role again. The filter cake is taken off about a scraper into an on-catch container. The belt ...
-
Manufactured by Mifab, Inc.based in USA
MIFAB Series BV1000 lacquered cast iron backwater valve with no hub inlet and outlet, gasketed bolted cover, and automatic pvc flapper type backwater ...
-
Manufactured by Transcend Cleantec Pvt. Ltd.based in INDIA
Transcend Cleantec multi-plate screw press is particularly designed for dewatering of sludge from water and wastewater treatment, biogas residue etc. The Multi Plate Screw Press of world leader in Solid liquid Separation which consumes very less power comparison to other sludge dewatering devices our multi plate screw press is extra advanced than traditional dewatering systems which can be easily ...
-
Manufactured by HYPER VALVES PVT. LTD.based in INDIA
Size: 1" to 4" Rating: 150# X 150# End Connection: Tri clover end Blow Down Pressure: 10% Less Then Of The Set Pressure Hydrostatic Test Pressure: 1.5 Times The Set Pressure Overpressure: 10% Of The Set Pressure Application : Pure Gas, Clean steam, Clean Air Material: SS304, SS316, Hast alloy, Inconel, Duplex Material of gasket: EPDM NBR FPM Max. temperature : 120 Deg. C Surface finish: Mirror ...
-
Manufactured by Handok Clean Tech Co., Ltd.based in SOUTH KOREA
Handok Clean Tech manufactures customized compressed carbon block filters based on its 30 years of know-how. Handok Clean Tech's compression-type carbon block filter has superior water purification performance and water flow compared to Standard Carbon block filter, and comes in various sizes and performance. In addition, customized filters can be manufactured according to the customer's ...
-
Manufactured by Lab Research Productsbased in USA
Replaces Part #LRP-12S-TS. The TempLog Plus Solid Door Laboratory Refrigerators are purpose built for scientific and medical applications. Units feature a digital microprocessor temperature controller allowing for the precise temperature management necessary for critical samples and supplies. A forced air directional refrigeration system provides superior temperature uniformity and recovery after ...
-
Manufactured by BOA Groupbased in GERMANY
EGR pipes ensure the transportation of hot exhaust gas back from the exhaust line to the intake airflow and do so in the high-pressure stream as well as the low-pressure ...
-
Manufactured by Topsun Pipelines(Huangshi)Co., Ltd.based in CHINA
Ductile iron pipe is pipe made of ductile cast iron commonly used for water supply and gas transmission in municipal industrial and mining enterprises. This type of pipe is a direct development of earlier cast iron pipe, which it has superseded. The ductile iron used to manufacture the pipe is characterized by the spheroidal or nodular nature of the graphite within the iron. Typically, the pipe ...
-
Manufactured by KSB Groupbased in GERMANY
Vertical, fully floodable submersible motor pump in close-coupled design, IP 68, single-stage, with or without level control, max. immersion depth 10 m. ...
-
Manufactured by Lagersmitbased in NETHERLANDS
Conventional seals are not able to perform under harsh dredging conditions that cutter suction dredgers (CSDs) encounter every day during their activities. For this sole purpose, Lagersmit has developed a highly reliable pump gear bulkhead sealing solution, which can handle large bulkhead and shaft deformations and can operate in abrasive environments at draughts of 16 m. It is designed to keep ...
-
Manufactured by Vinidex Pty Ltd.based in AUSTRALIA
Vinidex Series 1 PVC-U pipes with solvent cement joints are available in sizes from DN 15 to DN 150 in pressure classes from PN 4.5 to PN 18 depending on size. Vinidex solvent cement joint pressure fittings are also available in sizes from DN 15 to DN 150 and are classified as PN ...
-
Manufactured by Asahi/America, Inc.based in USA
Diaphragm valves offer many body and elastomeric diaphragm material combinations. The valve design is abrasion-resistant and non-clogging. When the diaphragm, which is connected to the stem of the valve by a compressor, is pulled away from the bottom of the valve body or weir, the path of the fluid has a smooth, streamlined flow. Slurries at low pressure, which would normally clog most other ...
-
Manufactured by Amerex Instruments, Inc.based in USA
Manufacturers of microtubes do not recommend storing them under cryogenic conditions because of the potential of liquefied nitrogen seeping into the tube through the cap. Current methods manually encase the entire tube in a heat shrink tubing using a heat gun. The CryoProof 313 is an innovative and patented tube sealer that automatically heat shrinks a short plastic tubing to seal only the cap of ...
-
Manufactured by Imbibitive Technologies America, Inc.based in USA
Our systems prevent leaks or spills of hydrocarbons from contaminating land and waterways. The functionality is simple: IMBIBER BEADS® gravity flow drain protection systems allow water to percolate through a drain, but will automatically aBsorb and seal a leak path when contacted by oil, fuels, solvents and thousands of other hydrocarbons preventing harm to the surrounding ...
-
Manufactured by Schenck Process UK Ltd.based in UNITED KINGDOM
The AccuRate® series volumetric feeding systems are available for every feeding application. Their most outstanding properties are their economy and flexibility, as well as their ease of integration into existing production ...
-
Distributed by Fluorostorebased in USA
Fluorotherm's current line of fluoropolymer rods consists of PCTFE structural rods. PCTFE is largely used for machined products for bearings, washers, gaskets, valve seats, gears and many other similar ...
-
Manufactured by MA.RO.S. Engineering s.r.l.based in ITALY
Pneumatically actuated 2-way angle valve with stainless steel body. Max fluid temperature +187 C°. Stainless Steel body. Suitable for heavy-duty high-frequency ...
-
Manufactured by Environment One Corporation (E/One)based in USA
E/One's focus on hydrogen-cooled generator gas monitoring and control systems begins at the point where cooling and purge gases enter the generator. Our Generator Gas Manifold (GGM) system is one of a range of standard or custom designed ...
-
Manufactured by Delphian Corporationbased in USA
The SafeCAL module installs in a Class ABCD (FMRC) conduit box with a glass dome. A Delphian sensor attaches through gold plated keyed connectors and a weather-proof fitting for easy installation and reliable operation. The entire system is sealed. All calibration is completed without opening the explosion-proof housing. SafeCAL will endure temperatures from -40oC (-40oF) to +85oC (+185oF). It ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you