We couldn't find any plating industry wastewater equipment suppliers or service providers located in Tennessee
Here is a list of equipment results with suppliers serving Tennessee
Plating Industry Wastewater Equipment For Water And Wastewater Available In Tennessee
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
The continuous flow Inclined Plate Clarifier with Mix & Flocc Tank separates mechanical and chemical emulsions and colloidal contaminants from wastewater as a single flow-through operation. The use of polymers or other chemical additives will help precipitate the contaminants to the hopper compartment for ...
-
Manufactured by Pacific Aqua Technologies Inc. (PAT)based in USA
Ion exchange is an economical method for producing pure water and treating industrial wastewater. Deionization is the process of removing dissolved ionized solids from water by ion- exchange. Pacific Aqua Technologies manufactures a wide range of commercial and industrial deionizers designed for permanent on-site installation. These packaged units are pre-wired, plumbed, and skid ...
-
Manufactured by Global Filter, LLCbased in USA
The pleated depth media is encapsulated in an integral, continuous-length, thermally-bonded structure for cleanliness, pressure tolerance, and chemical inertness. Offered in both absolute-rated (up to 99.98% retention) and nominally-rated (90% retention) grades in all end configurations. Manufactured in a clean-room environment to maintain high standards of purity and cleanliness. Commonly used ...
-
Manufactured by Miller-Leaman, Incbased in USA
The Automatic Turbo-Disc Filter is a fully automatic, self-cleaning disc filter system. Available in multiple micron sizes, the lightweight three-dimensional polypropylene disc media uses a minimal amount of backwash water (approximately 10 gallons of water per pod) relative to other automatic filters on the ...
-
Manufactured by A3-USA, Inc.based in USA
A3-USA manufactures the MaxFlow membrane module at our plant in North Carolina. The MaxFlow module has been used around the world for wastewater treatment for almost 20 ...
-
Manufactured by Product Recovery Management, Inc.(PRM)based in USA
PRM manufactures Plate Clarifiers for enhanced solids removal from process streams. The raw process water enters the clarifier where it is dispersed evenly through the chamber. The collection surface of the plates allows solids to slide downward to the sludge hopper for removal while the clarified effluent exits the unit through the effluent outlet. Plate Clarifiers can be used in conjunction ...
-
Manufactured by Pollution Control Systems, Inc. (PCS)based in USA
The Parallel Plate Clarifier is an inclined pate, shallow depth sedimentation device. In comparison, the Parallel Plate Clarifier has a number of advantages which overcome the limitations of other products designed for the same performance applications, advantages which yield savings in space requirements, capital, and operating costs. In addition, the technology is key to enhanced solids ...
-
Manufactured by Process Engineered Water Equipment (PEWE)based in USA
The unique technology built into each PEWE G2-SEP Single Phase Plate Clarifier maximizes settleable solids removal while minimizing chemistry usage. The chassis and vessel are constructed of AISI 304SS. With the Tru Counter Flo plate pack and adjustable weir system the G2-SEP Single Phase Plate Clarifier operates with complete precision of the optional PEWE Command Control automated panel. A pipe ...
-
Manufactured by Shengdong Technology Co., Ltd.based in CHINA
This product is a type of weak alkaline ion exchange resin which is consisted by styrene-divinylbenzene copolymers with tertiary amine group [-N(CH3)2] of macroporous structure. Due to the relative weak alkaline, the product can eliminate organic pigment, inorganic acid or silicate and adsorb impurities constituted by molecules of large size in acidic and near neutral medium effectively as well ...
-
Manufactured by SCHMITT-Kreiselpumpen GmbH & Co. KGbased in GERMANY
The normal priming centrifugal pump of the MDN series are dry-run safe and can be provided as chemical resistant version.In the MDN Pump Series, the motor power is transmitted contact free and abrasion-free with a magnetic coupling through the closed housing wall (“Slot-pot”) to the pump impeller. An encapsulated counter-magnet is built-inside the impeller. Therefore, a rigid shaft ...
-
Manufactured by Franklin Miller Inc.based in USA
The Screenmaster SP is a precision constructed fine screen which removes a remarkable amount of wastewater screenings from channel installation in municipal and industrial wastewater applications. This unit features specially design perforated plates that provide efficient fine screening. The SP can be easily installed directly in-channel even in tight plant locations. Models are available to ...
-
Manufactured by Ersin Groupbased in TURKEY
Compared to other diffuser types, Aquaflex APD1100 Plate Diffuser has much higher air capacity and it has a larger surface area. It is usually preferred in plants which has high capacity. There are proper mounting options according to pipe or box sections. Aquaflex plate diffusers are manufactured with latest technology of present day and used at waste water treatment plants. The projection of ...
-
Manufactured by Southern Water Treatment, Inc (SWT)based in USA
The Metal-Rec line of precipitants are formulated to remove heavy metals from the effluents of plating baths, etching solutions, and rinses containing soluble metals. They can reduce the concentration of the following metals to acceptable levels from most waste ...
-
Manufactured by Ersin Groupbased in TURKEY
Generally these types of diffusers are chosen for high capacities. There are proper mounting options according to pipe or box sections. Aquaflex plate diffusers are manufactured with latest technology of present day and used at waste water treatment plants. The projection of each diffusers of Aquaflex was done after Research and Development studies that response the requests of waste water ...
-
Manufactured by BÜSCH Technology GmbHbased in GERMANY
Lowering type penstocks get open by moving the plate downwards. The water will flow over the plate when the penstock is open. Lowering type penstocks get used in application, where it is important to hold the water-level ...
-
Manufactured by Shelco Filtersbased in USA
Filter Housings features heavy duty 304L stainless steel construction for maximum durability. Accepts standard BB style (4 1/2″ diameter) double open-ended cartridges for applications requiring greater dirt holding capacity or higher flow rates. Maximum operating pressure is 150 PSI (10 bar) @ 200°F (93°C). Ideal for higher temperatures and pressures versus plastic housings. Most ...
-
Manufactured by Southern Water Treatment, Inc (SWT)based in USA
The Metal-Rec line of precipitants have been formulated to remove heavy metals from the effluents of plating baths, etching solutions, and rinses containing soluble metals. MR-500C is especially effective at treating strongly chelated nickel solutions. MR-500C is able to treat: ...
-
Manufactured by Shelco Filtersbased in USA
Shelco’s Jumbo Housings & Cartridges are designed to accept a single cartridge filter that can handle flow rates of up to 150 GPM. With filter cartridges made of polyester media that can be cleaned and re-used and 304L or 316L stainless steel housings, this series is at its best against the toughest solutions and high solids ...
-
Manufactured by Ecologix Environmental Systems, LLCbased in USA
FlocClays are bentonite and organoclay based flocculants in powdered form that remove oils, grease, surfactants, dyes, inks, coolants, solvents, metals and heavy metals and suspended solids from wastewater. FlocClays consist of bentonite, organoclay, and other basic items that cause encapsulation of oils and greases, removal of other organics by partition and chemical bonding, as well as removal ...
-
Manufactured by Ecologix Environmental Systems, LLCbased in USA
Ecologix offers a variety of sludge dewatering filter press units that range in processing capability from 4,500- 90,000 gallons per day. Customize your configuration with elevated legs, plate shifters, platform roofs, pump controls, and a full line of accessories to accompany these ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you