Pump Station Equipment
-
PremiumManufactured by Kingspan Klargesterbased in IRELAND
Our Kingspan Klargester pumping stations offer complete peace of mind. If your power supplies fail this horizontal commercial pumping station will respond quickly and separate your liquids and solids into a different chamber and allow you to store the waste for up to 24 hours. When your power comes back online, the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 843 Membrane Pump Station enables the automatic rinsing and emptying of the measuring vessel in partly automated and fully automated Professional VA and CVS systems. It has two built-in membrane pumps that can be controlled via the remote signal. The versions for VA and CVS are equipped with the complete accessories for the automatic ...
-
Manufactured by Klawa Anlagenbau GmbHbased in GERMANY
Spiral pumps or wastewater pumps and their pipelines transport material at pumping stations. Technology installed at the pumping station moves the material more or less evenly to the downstream sewage plant. KLAWA has installed this equipment at many pumping ...
-
Manufactured by Universal Sanitary Equipment Manufacturing Company (USEMCO)based in USA
USEMCO Vac-U-Prime pump stations arrive at your site ready to mount on top of your concrete, steel or fiberglass wet well. The pumps out of the wet well and clean making them easy to access and maintain. Stainless steel bases with split covers and steel bases with easy lift assist flip covers available. Recessed Stations for ...
-
Manufactured by Sorgent.e Srlbased in ITALY
STE energy has consolidated experience in building water lifting systems by designing, supplying and installing. civil engineering works, penstocks and mass oscillation and pressure surge control systems draining pumps and centrifugal pumps. automation, protection, control and remote management systems. electric power systems and power ...
-
Manufactured by ROTO Groupbased in SLOVENIA
Pumping stations are used in areas were gravity flow is not avaible. Those house systems are used to transfer the waste water from lower laying facilities into the higher sewer or waste water treatment plant. Pumping stations of diameter DN600 consist of a nature friendly polyethylene [PE] shaft with cover that can handle up to ...
-
Manufactured by EMWG - Idro Groupbased in ITALY
GREEN LIFT stations are used for the accumulation and pumping of water. These pumping stations are designed in lightweight high density polyethylene which makes them easy to handle and install onsite. Installed below ground, GREEN LIFT pump stations permit water to be conveyed, ...
-
Manufactured by Dry Coolers, Inc.based in USA
The CleanLOOP CX Series Pump Station is a robust, closed-loop system for circulating treated water through the facility, protecting equipment from corrosion and scaling. The CX Pump Station is often designed with a large, non-pressurized reservoir to absorb the thermal load, stabilize the system temperature and pressure, and ...
-
Manufactured by Smith & Loveless Inc.based in USA
The DUO-DUCT represents Smith & Loveless’ most innovative underground pump station design for smaller applications. It offers many outstanding benefits over conventional, packaged pump stations, because of its station design and durability. With increased work space because of the elimination of suction ...
-
Manufactured by KRAL GmbHbased in AUSTRIA
Two pumps provide more than double the advantages. Cost-effective solution for double the flow rate and for maximum operational reliability. There are critical applications in which a second screw pump is prescribed for security. With KRAL pump stations you have a cost-effective and space-saving solution with which you can ...
-
Manufactured by Kordes KLD water and wastewater systems GmbHbased in GERMANY
The pumps and armatures are located in the dry area of the pump station. This provides ideal conditions for operation and thus creates the basis for a very long service life of the technical ...
-
based in UNITED KINGDOM
Bridges Electrical has successfully developed a new pumping station solution which has the following key benefits: Reduced capital outlay compared to existing standard systems, Reduced size eliminating the need for planning permission, Reduced running costs, Increased ...
-
Manufactured by ACCURO FIRE PROTECTION SYSTEMSbased in AUSTRIA
The pumping station is at the heart of every stationary extinguishing system. This is where the necessary pressure is generated for the extinguishing water and downstream extinguishing areas and ...
-
Manufactured by U.S. Composite Pipe, Inc.based in USA
U.S. Composite Pipe, Inc. currently has the capacity to build up to 192” diameter pump station structures. Using the same corrosion resistant polymer concrete, our pump station structures can be field cored to allow for the proper placement of the inlet and outlet pipes. The flat tops can have any supplied accessories ...
-
Manufactured by EMHKAM PUMPSbased in GREECE
Sliding vane pump 2” ATEX Electric motor 3Hp atex Reduction gear 600Rpm ATEX Flange with pipe joint Flat base with ...
-
Manufactured by Aquato Umwelttechnologien GmbHbased in GERMANY
Water does not always flow by itself. Wherever required by the geographical conditions, pumping stations are usually required. No matter whether it concerns the drainage of land to the nearest sewage system or the pumping of sewage to your own sewage treatment plant – with our systems you always make the right ...
-
Manufactured by Aquate Limitedbased in NEW ZEALAND
Aquate offer a wide range of pump stations for most domestic or commercial applications. Manufactured in either polyethylene or concrete, the Aquate range comes complete with an electrical controller, either one or two high quality pumps, alarms and all internal pipework. Aquate Pump Stations are delivered to ...
-
Manufactured by ASOS ASbased in TURKEY
Nowadays, along with the increase in population and living areas, the need for sewers and rainwater channels also increases. Pumping stations are needed when there is insufficient head at drinking water, rainwater and wastewater treatment plants. Pumping stations are selected according to the location of the ...
-
Manufactured by KAMPS s.a.based in BELGIUM
Kamps designs and delivers pumping stations for several applications from drinking water supply or irrigation to sewage.This activity is closely linked to the water treatment process where Kamps has more than 60 years experience. Kamps finds solutions, and adapts its product to respond to the specific requirements of the ...
-
Manufactured by Hutchinson Environmental Solutions Ltdbased in UNITED KINGDOM
Pump stations are used to move raw sewage, treated effluent and occasionally surface water from one place to another where gravity flow is not possible. So a pump station could be used to pump raw sewage from a newly-built single house to an uphill main sewer, or to replace an old package sewage treatment plant ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you