Pressure Piping Equipment For Water And Wastewater Available In Connecticut
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Designed for municipal applications, Blue Brute systems deliver superior strength with corrosion resistant performance and the ability to flex without damage. IPEX municipal pressure piping systems are made with a high-strength, high-impact PVC compound, allowing them to perform even under high traffic loads and deep burial ...
-
Manufactured by Plassonbased in ISRAEL
Low pressure – 70PSI; High-strength plastic spray nozzles; Anti-droplet mechanism; Average drop size at 70PSI – 65 microns; Filter system to avoid clogging; Available in two models: 5,0l / h and 7,5l / h; Maximum permissible pressure: 80PSI; PVC ...
-
Manufactured by Formula Airbased in NETHERLANDS
A complete range of products for the installation of a central high vacuum system within a production line, max 7000 mmWk underpressure. From the ducting, to the accessories, to the filter units, you are sure to find the products that suit your needs. Depending on your needs, the installation can be designed for a single or for multiple use. In case of bigger volumes of materials, a pre-separator ...
-
Manufactured by Saint-Gobain PAMbased in FRANCE
1/4, 1/8 and 1/16 KLIKSO ductile iron bend for PVC-U/PE pressure water pipes. Weight: fitting + joints. References: fitting + joints pre-fitted in the ...
-
Manufactured by JM Eaglebased in USA
Ultra Blue PVCO is a molecularly oriented pipe. Ultra Blue combines innovative engineering design and years of experience in PVC pipe manufacturing. The result is a higher performance, lighter weight, more cost effective pressure pipe for potable water and force main ...
-
Manufactured by Carbtrol Corporationbased in USA
The CARBTROL "G" Canisters handles flows up to 500 ...
-
Manufactured by Diamond Plastics Corporationbased in USA
Diamond Plastics manufactures 14” through 60” Trans-21™ cast iron O.D. PVC pressure pipe in accordance with AWWA C905, Standard for Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 In. through 48 In. (350 mm through 1200 mm), for water transmission and ...
-
Manufactured by Lajac ABbased in SWEDEN
Pipe STPI is manufactured in welded sendzimir galvanised plate. Available in lengths of 3000 and 6000 mm. Length 3000 mm = +/- 2 mm; Length 6000 mm = +/- 5 ...
-
Manufactured by Pipelife International GmbHbased in AUSTRIA
Our Pipelife PVC Pressure Pipes provide incredibly safe and efficient solutions for the transportation of potable drinking water. With their corrosion and chemical resistant structure, you have peace of mind with a durable installation that will last at least 100 years. ...
-
Distributed by Harrington Industrial Plasticsbased in USA
With IPEX's new high pressure clear PVC pipe you can specify Schedule 40 clear pipe for applications where previously only Schedule 80 clear pipe would suffice. Our high pressure formulation, with a long-term hydrostatic design basis of 3,150 psi allows for better clarity and more versatility for various applications. IPEX Clear-Guard Clear PVC pipe is produced from a rigid, virgin Polyvinyl ...
-
Manufactured by Evoqua Water Technologies LLC, Part of Xylem Inc.based in USA
Ultrapure & Industrial Services reverse osmosis units are designed and manufactured for sea water applications. They are horizontal configurations utilizing horizontal high-rpm centrifugal pumps. They are pre-engineered, pre-assembled units that minimize installation and start-up costs. They are fully tested at the factory and require simple utility connections and with minor set up and ...
-
Manufactured by Chiko Airtec Co., Ltdbased in JAPAN
CMP series dust collectors are medium size with medium pressure / high air blower capability. Suitable for sucking in surrounding air by using a hood with large opening area or by branching to multiple ...
-
Manufactured by BKP Berolina Polyester GmbH & Co. KGbased in GERMANY
The solution for the rehabilitation of wastewater pressure ...
-
Manufactured by Quest-Tec Solutionsbased in USA
The MTLT-5000 is based upon the magnetostrictive principle. The sensing tube contains a wire which is pulsed at fixed time intervals. The interaction of the current pulse with the magnetic field created by the magnetic float causes a torsion stress wave to be induced in the wire. This torsion propagates along the wire at a known velocity, from the position of the magnetic float and toward both ...
-
Manufactured by JM Eaglebased in USA
JM Eagle’s Blue Brute CSA B137.3 Certified pipe is suitable for use in distribution pipelines of mains, water service piping and process ...
-
Manufactured by Industrial Services Inc. (ISI)based in USA
We offer Brackish Water Reverse Osmosis (BWRO) systems for water that is lower than seawater salinity and generally comes from an inland, underground source. We can provide reverse osmosis water treatment systems to serve industrial, commercial, or municipal purposes such as drinking or irrigation. These BWRO systems run at lower pressure than typical seawater RO plants and can be used for a ...
-
Distributed by MeterMall USAbased in USA
Regin Smoke Emitter Cartridges produce a generous amount of smoke at a constant rate for easy identification and assessment of air flow patterns of HVAC systems and fume hoods. They consist of a small plastic cup into which the smoke generating compound is packed. The compound ignites when touched by a lit match or lighter. No flame is produced, only generous amounts of dense white smoke. The ...
-
Manufactured by JM Eaglebased in USA
PVC I.P.S. Pressure Rated Pipe. DR 41/DR 32.5/DR 26/DR 21/ DR 17. Pressure Rated 100, 125, 160, 200 and 250 psi. Ring-Tite Joint 1.5' - ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Designed for municipal water applications, Blue Brute AWWA C900 pressure pipe delivers superior strength with corrosion-resistant performance and the ability to flex without damage. Made with a highstrength, high-impact PVC compound, Blue Brute pipes perform even under high traffic loads and deep burial conditions. Manufactured with cast-iron outside diameters, Blue Brute is compatible with ...
-
Manufactured by KMG Pipe Rehabilitation Emirates L.L.C.based in UNITED ARAB EMIRATES
The UNILINER CIP system is a flexible solution for all application in the non – pressured pipe rehabilitation. UNILINER is a multilayer PU-coated polyester needle felt. This liner can be impregnated with polyester resin, vinyl-ester resin or epoxy resin. And installed and cured with the standard water column inversion process. The end product of the UNILINER system is a fully structural ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you