Primary Water Treatment equipment for Water and Wastewater

The HiFlowTM lamella separator is a high rate solids separation process that has 1/10th of the physical footprint as compared to conventional circular clarifiers. It is used in a number of industrial wastewater applications such as anodisers, glass factories, tunnel construction, groundwater treatment, galvanizing plants, general industrial ...

By Hydroflux Pty Ltd based in Sydney, AUSTRALIA. from Hydroflux Industrial - Industrial Wastewater Product line

The efficient design of the SuperSettler™ inclined plate clarifier utilizes lamella plates and shallow depth sedimentation to minimize the clarifier footprint. Pioneered by Nordic Water Products, the SuperSettler is available in both inclined plate packs and stand-alone settler units.

By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Clarification Product line

The CoverSweep launder covers eliminate problems associated with excess algal growth in clarifier launders. The CoverSweep system is a series of interlocking fibreglass or stainless steel hatches allowing access to the entire trough if required, yet all the while blocking 100% of sunlight across the launder trough, effluent weirs and scum baffle. ...

By Hydroflux Pty Ltd based in Sydney, AUSTRALIA. from Hydroflux Industrial - Industrial Wastewater Product line

Ovivo SpinTM LLH de-oiling hydrocyclones are very effective in removing dispersed oil. They are excellent coalescing devices and are effective primary treating equipment. When compared to corrugated plate interceptors (CPI) and skimmers, Ovivo Spin LLH systems offer comparable capacity but higher separation efficiency, in a more compact ...

By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Oil & Gas - Produced Water Primary Treatment Product line

Ovivo SEP™ CPI units provide oil and water separation for a multitude of industrial wastewater. The unit is designed to remove all free oil from contaminated streams to comply with the most stringent of discharge requirements. Typically, no more than 5mg/l of oil will remain, with no visible sheen.

By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Oil & Gas - Produced Water Primary Treatment Product line

The OVIVO Skim skimmer technology provides an economical way to remove the bulk of dispersed oil and solids within a liquid. Ovivo has designed vertical and compact models, well suited for offshore installations, in addition to our standard horizontal designs. The equipment can be adapted to serve as a produced-water degassing vessel. Our range of ...

By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Oil & Gas - Produced Water Primary Treatment Product line

The SanSep provides a much more efficient level of solids removal than other mechanical and static screening devices that are typically used in wet-weather excess sanitary flow treatment. It greatly reduces the impact of excess wet-weather sanitary flows by removing all visible solids and associated pollutants and returning them directly to the ...

By Process Wastewater Technologies LLC based in Rosedale, MARYLAND (USA). from CSO/SSO Products Product line

Communities must find a reliable and effective way to prevent weather-related combined sewer overflow (CSO) and sanitary sewer overflow (SSO) from spilling directly into nearby waterways. While a separate treatment system for CSO/SSO concerns is viable for some plants, others do not have the footprint or funding for a single-use system. The WWETCO ...

By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Clarification Product line

GWT series ultrafiltration system solutions for process water and wastewater reuse applications utilize both submerged and vacuum based polymeric and ceramic membrane configurations. In understanding your specific application, and evaluating your water analysis after primary treatment, we will work with you to assess the optimal membrane type and ...

By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

With certain water parameters, an essential aspect of effective treatment is adequate pretreatment of the raw water before reaching the primary treatment system. This is true whether the application is for potable water, commercial, industrial, or environmental. Without proper understanding of the water chemistry and parameters that affect system ...

By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA). from Treatment Processess Product line

Geostream provides the most advanced technologies for sand filtration, filtration using self-cleaning filters, filtration cartridges, iron removal, water softening, metals removal using zeolite and pyrolusite and removal of organic substances using activated carbon. Filtration is generally used as a pre-treatment in primary and process water or as ...

By GeoStream Srl based in Tarcento (UD), ITALY. from Water Treatment Product line

VigorOx WWT II is a strong chemical disinfectant for use in wastewater treatment that can replace chlorine or improve the performance of a UV system. VigorOx WWT II, a peracetic acid (PAA)-based formulation, is an equilibrium mixture of acetic acid (vinegar), hydrogen peroxide and water.

By PeroxyChem based in Philadelphia, PENNSYLVANIA (USA). from Wastewater Disinfection Product line

The GREEN BIO septic system is ideal as primary treatment for civil waste water destined for further treatment or, with the addition of disinfection chamber, destined for disposal through sub-irrigation. The GREEN BIO system does not consume energy because it functions continuously thanks to a combination of mechanical sedimentation and two ...

By EMWG S.r.l based in Seregno (MB), ITALY. from Compact Wastewater Treatment Plants Product line

In addition to plants and devices, T&D produces and distributes chemical products and materials of consumption to be used with the plants themselves.

By T&D WATER TECHNOLOGIES based in Polverara (PD), ITALY.

Rotary Drum Filters (Screens) are devices used for primary water treatment. Production of devices according to client's request. Material: AISI304, AISI316, Capacity: 10-720 m3/h, Slot width: 0.25-2.5 mm.

By Tehnika Plast-Wastewater Solutions based in Ugrinovci-Belgrade, SERBIA.

Reverse Osmosis is the process which occurs when a saline solution is put in contact with a water permeable membrane (but impermeable to the dissolved solids) at a pressure higher than the osmotic pressure of the solution. A solution (permeate) with a saline content lower than the original solution will pass through the membrane, while a salt rich ...

By O.M.C. Collareda S.r.l. based in Schio (Vicenza), ITALY. from Primary Water Treatment Products Product line

The system is designed to treat bacteriologically and organoleptically polluted water, with an average salinity of 1.500 – 2.000 TDS. Low pressure reverse osmosis system membranes are able to filter all bacteria and to remove about 75/85% of salinity. Low output membranes are used as they do not require specific chemical products for ...

By Euro Mec s.r.l - Idro Group of companies based in Porto Mantovano (Mn), ITALY. from Mobile Drinking Water Units Product line

The first step to which residual water is subjected when entering a Sewage Farm is a pretreatment. Big solids, sand and grease are removed. Next, water undergoes the so-called primary treatment.

By Edibon International based in Madrid, SPAIN. from Environment - Water Treatment Product line

In various industries diverse types of cooling systems are used. Depending on the type of system all cooling water needs a particular treatment. The primary reasons therefor are: saving on consumption of cooling water and protection against corrosion, deposits (to preserve the heat-transfer) and biological growth (to avoid legionaire's disease). ...

By PCA NV based in Aalst, BELGIUM. from Water Treatment Product line

Square DAF unit with unique design allowing a flow pattern similar to the circular unit, Designed for small and medium flow rates, Tank (concrete or steel) with two separate sectors for higher application flexibility, Central diagonal water collecting pipe, Flow from two opposite corners, Decreasing flow velocity and very low turbulence, Increased ...

By Meri Environmental Solutions GmbH based in Munich, GERMANY. from Primary Water Treatment Product line