Process Fluids Equipment For Water And Wastewater Available In Iraq
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Eaton filters bags are manufactured from pure fibers needled together to form a 3 dimensional medium. Operating on the principle of depth filtration, the fibers form a path along with the process fluid must ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI provides temperature transmitters mounted in thermowells with integral or remote solid state electronics housed in protective hermetically or environmentally sealed enclosures for direct installation into piping and ducting on commercial and military aircraft, spacecraft, vehicles and marine applications. These transmitters utilize highly reliable Resistance Temperature Detector (RTD) ...
-
PremiumManufactured by CETCObased in USA
VENTURI MIXING HOPPERS are designed to aid in the introduction of dry powdered drilling fluid, polymers, and additives into a liquid phase, decreasing the time required for mixing and increasing the yield of drilling fluid, polymers, and additives though better ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Series 233L expansion joints are built to withstand even the most rigorous piping system configurations. They are low-profile, triple-arch products which are specifically designed to absorb directional movements of rigid pipe systems, as well as reduce noise and vibration, and compensate for misalignment due to long-term ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Eight pages of information featuring Sauereisen organic linings for the Power, Wastewater, Food & Beverage and Chemical Processing industries. When it comes to corrosion-resistant linings, Sauereisen is the pre-eminent choice. Our mission is to provide barriers against corrosion. We do this by providing a vast selection of protective coatings and linings for steel, concrete and other ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style RC-231 wide arch concentric rubber expansion joints are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER Washing Plant L700 is used for degreasing and cleaning of parts or tools. Two programs are available, automatic and manual. For manual cleaning by hand brush the washing table will be lifted to an ergonomic working height. The KOLLER Washing Plant L700 is especially designed environmentally friendly. During the cleaning process the fluid is continuously circulated, filtered and at the ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
The Amafilter® AFM6-24 are industrial cartridge filter housings, depending on the fluid rheology, to offer an economical solution suitable for non-hazardous fluids and (process) water applications. The range is available in four different sizes to suit various flow rates. The range is manufactured in stainless steel and conforms to PED2014/68/EU article 4, paragraph 3. Suitable for ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style RE-231 wide arch expansion joints are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI provides temperature switches mounted in thermowells with integral or remote solid state electronics housed in protective enclosures for direct installation into piping and ducting on commercial and military aircraft, spacecraft, vehicles and marine applications. These switches utilize highly reliable Resistance Temperature Detector (RTD) elements that provide a linear change in resistance ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 271 rubber expansion joint is a single super-wide flowing arch design. It’s self-cleaning, which eliminates the need for a filled arch design and makes it the perfect choice for slurries. The Style 271 can replace and be interchanged with hand-built narrow/wide arch, molded wide arch, and spherical type expansion ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Hayward filters bags are manufactured from pure fibers needled together to form a 3 dimensional medium. Operating on the principle of depth filtration, the fibers form a path along with the process fluid must ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The heat exchanger design process involves several steps: Analysing the application. Identifying the fluid properties. Solving the energy balance. Defining the heat exchanger geometry. Thermal design. Design interpretation. Mechanical ...
-
Manufactured by PF10 Impianti Industrialibased in ITALY
The Plant Division designs and builds plants for the treatment of water and gaseous streams, ultra- and nano-filtration systems for process fluids and waste water. ...
-
Manufactured by GIMAT GmbH Umwelttmesstechnikbased in GERMANY
Simply insert the system into a pipe as a means of monitoring food or drink production, or the manufacture of pharmaceuticals, process fluids and washing solutions, etc. The water content and mix ratio can be determined from the refractive index, Brix or concentration. The prism is specially designed to minimise adherence of solids to the surface, even after very long cleaning ...
-
Manufactured by KETO Pumpsbased in AUSTRALIA
We offer a full range of K-VT Vertical Turbine pumps designed to operate in wells or sumps; water or oil lubricated, threaded or flanged construction. All have the flexibility of various options to meet your demands for a variety of applications, including municipal, mining, agricultural and industrial process. K-VT Vertical Turbine pumps covers a wide range of hydraulic conditions to meet ...
-
Manufactured by Trucentbased in USA
Filtering out tiny fiberglass particles from process water is a critical part of the fiberglass insulation manufacturing industry. Producing fiberglass insulation requires the use of a lot of water for various applications throughout the plant. One critical area is the Air Scrubber ...
-
Manufactured by Jacobs Process Analytics Inc.based in USA
The Motiv-Air-Torr® is a tee-type mini-eductor (Venturi eductor) that provides a compact, highly efficient solution to remote sampling of gases or liquids. Our Venturi eductor has no moving parts, so it is maintenance free and optimized for minimal gas usage. Uses of this miniature industrial aspirator, also know as a Venturi vacuum pump or eductor, include gas or liquid aspiration, fine ...
-
Manufactured by NOSHOK, Inc.based in USA
Combines isolating and venting in a single valve, eliminating the need for tubing and fittings. Block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation on the bottom. The 1/4" NPT vent plug is located 90° to the left and may be removed and replaced with exhaust ...
-
Manufactured by Vincent Corporationbased in USA
The Pulp Fluidizer was developed to enable pumping frozen blocks or chubs of fruit pulp while maintaining the highest level of flavor characteristics. The machine has found acceptance in fluidizing frozen pulp and pomace from both deciduous and tropical fruits. It is also used, as convenient, to liquify frozen juices in blending and not- from-concentrate operations. The unit is a premium machine ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you