Process Fluids Equipment For Water And Wastewater Available In Papua New Guinea
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Eaton filters bags are manufactured from pure fibers needled together to form a 3 dimensional medium. Operating on the principle of depth filtration, the fibers form a path along with the process fluid must ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI provides temperature transmitters mounted in thermowells with integral or remote solid state electronics housed in protective hermetically or environmentally sealed enclosures for direct installation into piping and ducting on commercial and military aircraft, spacecraft, vehicles and marine applications. These transmitters utilize highly reliable Resistance Temperature Detector (RTD) ...
-
PremiumManufactured by CETCObased in USA
VENTURI MIXING HOPPERS are designed to aid in the introduction of dry powdered drilling fluid, polymers, and additives into a liquid phase, decreasing the time required for mixing and increasing the yield of drilling fluid, polymers, and additives though better ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style RC-231 wide arch concentric rubber expansion joints are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 271 rubber expansion joint is a single super-wide flowing arch design. It’s self-cleaning, which eliminates the need for a filled arch design and makes it the perfect choice for slurries. The Style 271 can replace and be interchanged with hand-built narrow/wide arch, molded wide arch, and spherical type expansion ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style RE-231 wide arch expansion joints are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The heat exchanger design process involves several steps: Analysing the application. Identifying the fluid properties. Solving the energy balance. Defining the heat exchanger geometry. Thermal design. Design interpretation. Mechanical ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI provides temperature switches mounted in thermowells with integral or remote solid state electronics housed in protective enclosures for direct installation into piping and ducting on commercial and military aircraft, spacecraft, vehicles and marine applications. These switches utilize highly reliable Resistance Temperature Detector (RTD) elements that provide a linear change in resistance ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Eight pages of information featuring Sauereisen organic linings for the Power, Wastewater, Food & Beverage and Chemical Processing industries. When it comes to corrosion-resistant linings, Sauereisen is the pre-eminent choice. Our mission is to provide barriers against corrosion. We do this by providing a vast selection of protective coatings and linings for steel, concrete and other ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Series 233L expansion joints are built to withstand even the most rigorous piping system configurations. They are low-profile, triple-arch products which are specifically designed to absorb directional movements of rigid pipe systems, as well as reduce noise and vibration, and compensate for misalignment due to long-term ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Hayward filters bags are manufactured from pure fibers needled together to form a 3 dimensional medium. Operating on the principle of depth filtration, the fibers form a path along with the process fluid must ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER Washing Plant L700 is used for degreasing and cleaning of parts or tools. Two programs are available, automatic and manual. For manual cleaning by hand brush the washing table will be lifted to an ergonomic working height. The KOLLER Washing Plant L700 is especially designed environmentally friendly. During the cleaning process the fluid is continuously circulated, filtered and at the ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
The Amafilter® AFM6-24 are industrial cartridge filter housings, depending on the fluid rheology, to offer an economical solution suitable for non-hazardous fluids and (process) water applications. The range is available in four different sizes to suit various flow rates. The range is manufactured in stainless steel and conforms to PED2014/68/EU article 4, paragraph 3. Suitable for ...
-
Manufactured by Gusher Pumpsbased in USA
You want to safely and costs effectively transfer all of your process and waste fluids. You want better pump performance at a reduced cost. You want to work with automotive professionals who know your specific challenges. We have what you need - Gusher air-operated, double diaphragm ...
-
Manufactured by Delta Valves Pvt. Ltd.based in INDIA
DELTA VALVES manufacturing Sight Glass (Sight Flow Indicator) in Cast Construction & Fabricated design to meet an industrial requirement of various applications to inspect the process fluid. In Double Window Sight Glass (Sight Flow Indicator) Contains Two Toughened Glasses Mounted opposite to each other. AND IN FULL VIEW Sight Glass can be installed vertically or horizontally in the middle of ...
-
Manufactured by Plasticon Projectsbased in NETHERLANDS
For chemical recovery and pollution control, Plasticon Composites International Contracting offers process equipment such as vessels, reactors, scrubbers, biofilters, biogas reactors and many related accessories. This equipment handles the full range of dynamic and hydrostatic loads for chemical environments in industries such as waste water treatment, power generation and chemical ...
-
Distributed by Cannon Bono Energia S.p.A. - part of the Cannon Groupbased in ITALY
Demineralization is concerned with the removal of all dissolved mineral matter from water. Most common applications of demineralisation: Treatment of Boiler Feed Water (BFW), in order to maintain high heat-transfer efficiency in the boiler by preventing deposition of precipitated scale and corrosion or deterioration of surfaces in contact with water. When production of steam is related to power ...
-
Manufactured by Turbosan Turbomakinalar San. ve Tic. A.S.based in TURKEY
Türbosan – DAC-SC/Y ve DAS series submersible sewage pumps are designed to pump liquids with large sized solids.These pumps can pump liquids with large solids without clogging. They are available with different versions for installation in dry pit or wet pit pump type pump ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Sales7(at)tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store MISSION MAGNUM XP PUMPS The 12x10x23 & 14x12x22 XP pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive, or just plain tough to pump, such as high concentration sand slurry in oil and gas hydraulic fracturing process. Full pipe diameter entrance design ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Tobee D3145WRT1A05A Impeller is a wearing part used for 4/3D-AH Slurry Pump, with 4 vanes. Slurry Pump Parts are the most wear parts for the slurry pumps on the site, Slurry pump spare parts mainly include impellers, liners, seals, shaft sleeves, and bearing assembly etc. They are designed for use in the toughest and most abrasive applications, and having a wide range of wear parts available ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you