Only show results available in Virginia? Ok

Process Water Applications

  • Premium

    Evaporators and concentrators for cold meat

    Wastewater from the processes of salting, process water, washing water.

    By Eco-Techno s.r.l Vacuum Evaporation System based in Busnago MB, ITALY.

  • Premium

    Evaporators and concentrators for diecasting and moduling

    Concentrations of residual casting liquid, washing liquid of mold, waste water from processes, waste water with dye penetrant.

    By Eco-Techno s.r.l Vacuum Evaporation System based in Busnago MB, ITALY.

  • Premium

    Evaporators and concentrators for food & beverage

    Purification of waste water washing lines, recovery and concentration of sugar solutions, recovery of concentrates for resale, reuse of process water for industrial uses.

    By Eco-Techno s.r.l Vacuum Evaporation System based in Busnago MB, ITALY.

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used source...

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Industrial wastewater solutions for clearcat crystal-clear distillate from used coolant emulsions

    Metal-working factories generate a lot of oily effluent as a result of manufacturing processes. The coolant emulsions tailored to the individual application contain oils, waxes, greases and preservatives, as well as a cocktail of ingredients to improve product properties. The emulsions used must not be discharged untreated into the drain system or open bodies of water; they must be disposed of at high cost.

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Ultraviolet disinfection systems for the food & beverage industry

    Waterborne micro-organisms are responsible for adverse affects on the flavour, colour, odour, and shelf life of soft drinks, bottled water and food products. It is therefore the fundamental objective of food and beverage manufacturers to eliminate micro-organisms from process water, product water and sugar solutions to overcome this problem. A wide range of Ultraviolet disinfection units have been specially designed and developed by atg UV Technology, allowing manufacturers to gain complete control over these...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Measurement and control systems for the Boiler water monitoring

    In ongoing operation, the substances suspended in the boiler water are concentrated. In order to avoid the negative consequences (foaming, deposits) of excessive salt content in the boiler water, specified limit values must not be exceeded. With the aid of a desalination control valve, boiler water with concentrated content is constantly removed and replaced with clean water. If the limit values are exceeded, the conductivity limitation ensures prompt switching off of the burner(s). Foreign substances that have...

    By IGEMA GmbH based in Münster, GERMANY.

  • Industrial solutions for cooling water contamination

    Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water changes.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water analyzers for Process water

    Process water is one of the most challenging for analysis instrumentation. Mostly this water is characterized by a certain purity, fluctuating loads, as well as very high salt concentrations. Since any disturbance in water-circuits can lead to an entire plant shutdown, resulting in huge costs, reliable and fast online water analyzers are an essential. Due to the diverse demands of various measurement challenges, application-specific analyzers provide huge advantages against standard analyzers that are used for...

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • High-calcium lime slurry for industrial (chemicals & food processing) sector

    Lime is used in many industrial applications to treat plant processing water and as a key ingredient in the production of chemicals and the food processing industry.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Filter technique solutions for the textile industry

    Treatment of wash bath and colour bath, treatment of process water, cleaning waste water.

    By KLASS-Filter GmbH based in Türkenfeld, GERMANY.

  • Process Design

    Custom water and wastewater engineering, consulting and process design services to prevent air, land, water and environmental pollution. We rework systems as processes change and troubleshoot where necessary to bring systems into compliance. • High purity and process water • Biological nutrient removal • Solids treatment • Toxicity reduction • Industrial treatment • Advanced oxidation and alternative disinfection • Effluent reclamation and reuse • Land application systems • Natural treatment systems •...

    By Yates Environmental Services based in Spokane, WASHINGTON (USA).

  • Agitation and mixing solutions for pulp & paper

    The pulp and paper market includes the manufacture of paper from a variety of woods and cellulosic material. The pulp mill also includes recovery, coating, and effluent treatment applications.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Instrumentation technologies for industrial

    There are many industrial operations that are producing waste water and process water that is at risk of contamination with e.g. lubricating oils or cooling oils. There is also significant use of cooling water at risk of contamination through leaks in heat exchangers and condensers.

    By Advanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM.

  • Integrated Environmental Solutions for food and beverage industry

    State-of-the-art Technology for Food Processing. Food and beverage manufacturers face a complex and constantly evolving industry due to dynamic changes in regulations, customer preferences and market conditions. Notwithstanding stringent hygiene requirements, F&B manufacturers are also forced to minimise their water footprint and comply with strict wastewater discharge regulations in the interest of long term water sustainability.

    By Hyflux Membranes based in Singapore, SINGAPORE.

  • Water & Wastewater Applications

    -Commercial -Drinking Water -Process Water -Ultrapure Pretreatment -Water Re-use And more....

    By Innovative Water Treatment based in Smithfield, UTAH (USA).

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher...

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Microbial testing for industrial process water sector

    Real-time Information for Same Shift Problem Solving! Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s QuenchGone21 Industrial (QG21I™) test kit instantly measures the total microbiological content in industrial process waters to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing process water systems and aids with disinfection and cleaning cycles. LuminUltra`s QG21I test is the ideal tool to help...

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Wastewater pretreatment solutions for industrial machinery/tools and equipment

    Grinding and Milling Machinery. Machinery coolant and Tramp Oil recovery. Process Water.

    By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you