Process Water Applications in Canada

  • High-calcium lime slurry for industrial (chemicals & food processing) sector

    Lime is used in many industrial applications to treat plant processing water and as a key ingredient in the production of chemicals and the food processing industry.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Industrial solutions for cooling water contamination

    Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water changes.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring for pulp & paper industry

    Pulp and paper waste streams are exceptionally well suited for spectral analysis due to the high concentration of UV/Vis light absorbing organics in their process water and waste streams. Continuous monitoring of the organic load by means of COD/BOD correlations will help ensure the treatment process is carried out in the most efficient way possible by optimizing aeration rates and nutrient dosing while also making sure that all the regulatory goals are met.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Cleaning process for water intake

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA).

  • Premium

    Process Analytics - Wastewater Applications

    Control of wastewater is increasingly becoming important to avoid potential environmental and increasing legal consequences. Accurate pH, O2, conductivity and turbidity measurements are critical in modern wastewater treatment. METTLER TOLEDO offers reliable, cost-effective solutions to control industrial effluents.

    By Mettler - Toledo Int. Inc Distributor in QUEBEC (CANADA).

  • Wastewater monitoring for water treatment

    All of our systems are ready to use for Water and Wastewater management right out of the box. Backed by 24/7 support and over a decade of development and experience, our solution is generally 50% lower in capital expenses and up to 40% lower in life cycle cost than most offerings on the market. We offer a highly reliable system and a customized experience that will lower your control and monitoring costs.

    By Atookoo inc. based in Sherbrooke, QUEBEC (CANADA).

  • Industrial solutions for process water control

    Problem: Water is fundamental for numerous manufacturing processes. Contaminated or poor quality process water can cause significant operational problems and compromise the quality of the product.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Gas infusion technology solutions for the food and beverage industry

    Gas inFusion technology is a global platform technology with numerous market applications, both stand alone and bundled with other technologies. It is a proprietary, worldwide-patented mass transfer technology. Liquid-O™ is a proprietary process and equipment system based on the Gas inFusion technology. Liquid-O™ infuses large amounts of dissolved oxygen into water in a bubbleless and stable manner at atmospheric pressure. The materials used are FDA approvable and the equipment, like the technology is simple, small, and effortless to operate.

    By inVentures Technologies Incorporated. based in New Brunswick, NEW BRUNSWICK (CANADA).

  • Pi² Technologies for Water Treatment

    The waste water treatment plants are often singled out by local resident as the source of bad odours in the neighbourhood. The sources of these odours are numerous: pre-treatment, activated sludge, etc.

    By Pi² Technologies Inc based in Montreal, QUEBEC (CANADA).

  • Premium

    Water treatment solutions for chemical vendors industry

    ProMinent and the chemicals industry: a good combination. With metering equipment from ProMinent we can take your chemicals to the next level and make them more high-performance, more environmentally-friendly and safer. And this is something that everyone can benefit from.

    By ProMinent Group - ProMinent GmbH Distributor in ONTARIO (CANADA).

  • Premium

    Water treatment solutions for cooling water treatment

    Efficiency is everything in the cooling water circuit. Everything at ProMinent revolves around the perfect cooling water circuit, which needs to experience few losses over its long life. The precise metering of inhibitors and biocides and suitable filters make this possible.

    By ProMinent Group - ProMinent GmbH Distributor in ONTARIO (CANADA).

  • Trenchless solutions for the utilities sector

    Whether you need to replace an aging conveyance system or simply increase capacity, we’ve got the equipment to keep you online as much as possible, make quick work of the job and ensure your continued profitability.

    By TRIC Tools Inc. Distributor in Vaughan, ONTARIO (CANADA).

  • Water quality monitoring for municipal wastewater industry

    Real Tech’s analyzers can be used in municipal wastewater treatment applications to ensure environmental compliance and to increase process efficiency by continuously monitoring the incoming loads and making process adjustments accordingly to optimize aeration rates, and nutrient and chemical dosing.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Agitation and mixing solutions for pulp & paper

    The pulp and paper market includes the manufacture of paper from a variety of woods and cellulosic material.  The pulp mill also includes recovery, coating, and effluent treatment applications.

    By National Oilwell Varco Office in ONTARIO (CANADA).

  • Water quality monitoring for textile industry

    Wastewater from a textile facility contains a variety of dyes and organic chemicals from the manufacturing processes that are often difficult to treat. Spectral analysis is well suited for monitoring waste streams to identify problematic dyes prior to treatment. Continuous monitoring of effluent wastewater for BOD and COD helps to ensure effective treatment and quality of effluent to ensure regulatory goals are met prior to discharge.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Water treatment solutions for utility water treatment

    It makes economic sense to reuse process water. Why would you discharge water just because you`ve used it once? If this water is treated properly, it can be reused with ease, cutting costs in no time.

    By ProMinent Group - ProMinent GmbH Distributor in ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you