Process Water Equipment For Water And Wastewater In Bosnia & Herzegovina
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
The AMETEK Land Slag Detection System (SDS) delivers improved yields, higher-quality steel and reduces costly downstream processing. There are additional benefits in reduced ladle refractory ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
This conductivity meter measures conductivity, resistivity and salt in water solutions. It is a field type, with a waterproof case, and is easy to hold and move. It enables anyone to conduct high-precision measurement, anytime and anywhere. Naturally it can be used by specialists at research institutions, but it can be also be used in wide range of other feilds relating to equipment management ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Accurate measurement of UPW resistivity. Well-examined temperature compensation function for UPW. Arbitrary setting of the compensation target temperature. ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The HE-960HI is a wide-range type sanitary electric conductivity meter that can measure over a wide range from manufacturing water up to 500 mS/cm, and enables advanced concentration management through abundant outputs. Cleaning-in-Place (CIP) terminal management and a reduction in cleaning solutions is also achieved through accurate surface detection. And we have developed a lineup of electric ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Redox potential measurement of various solutions. Suitable for aeration control of sewage treatment and neutralization of chemicals. Extensive interfaces (2-channel transmission output, RS-485 compatible, 4-relay ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The HE-960CW is ideal for the conductivity control of the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals. And we have developed a lineup of electric conductivity sensors that can be used in conjunction, from the conventional insertion type to the flow-through type with improved cleaning and sanitary ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The OPSA-150 is a new organic pollutant monitor that uses HORIBA's proprietary Rotary Cell Length Modulation, a measuring technique incorporating 25 years of expertise. The unit can be used as an organic pollutant monitor at drainage systems for determining compliance with COD monitoring regulations, for monitoring quality of water measuring levels of organic matter at water supply intakes, and ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
More than 10 years have passed since the 5th Water Use Regulation was enforced in 2001. From the perspective on preservation of ambient water quality, it has become a matter of course for companies to be compliant with regulations and observe corporate compliance. Total nitrogen and total phosphorus monitoring in the future has the potential to lead to proactive enhancement of corporate value, in ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Everything from precise measurement to reduced running costs. HORIBA-leading the world in practical environmental analysis technology will give a benefit for Total Nitrogen/Phosphorus monitoring. Total nitrogen, total phosphorus. To measure these two new targets in the 5th of Total Water Contaminants Regulation enforced in Dec. 2001 in Japan, the TPTN-300 offers the ultraviolet oxidation ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Since this flow-through type sensor has no internal protuberances, fluid flows through the sensor with exactly the same inside diameter as the pipe, thus helping reduce fluid retention and ensuring that CIP chemical fluid is drained completely, which results in higher cleaning performance. The FES-310L Series sanitary conductivity sensors, which are used in conjunction with the HE-960HS ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Membrane type polarography method. Span calibration by air preceded by auto-zeroing (Electrical auto zeroing function). Self-diagnosis of membrane damage and infiltration into the probe. On-site membrane replacement as well as whole sensor ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The FES-210L Series sanitary conductivity sensors are electric sensors that target sanitation issues by employing a flat structure that keeps dirt from adhering to the tip of the sensor, and they enable continuous, high accuracy measurement in liquids of various concentrations, from purified water to cleaning solutions. The FES-210L Series, which is used in conjunction with the conductivity ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Self-diagnosis of membrane damage and infiltration into the probe. On-site membrane replacement as well as whole sensor replacement. Span calibration by air preceded by auto-zeroing (Electrical auto zeroing function). Extensive interfaces (2-channel transmission output, RS-485 compatible, 4-relay ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Revolutionary waterproof meter and electrodes enhance care-free operation in the lab or ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
This field-type dissolved oxygen meter measures dissolved oxygen concentration (DO), oxygen concentration (O2), saturation (SAT.RATIO) and temperature of water solutions. It uses a laboratory sensor to enable BOD measurement. Waterproof construction enables use at virtually any measurement site. This meter is being used in research institutions, and at a variety water quality related production ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Suitable for fluoride ion monitoring in effluent from factories, e.g., those of semiconductor FPD and glass manufacturers. 0 to 10,000 mg/L wide measuring range (10-range ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Redox potential measurement of various solutions. Suitable for aeration control of sewage treatment and neutralization of ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA’s TW-100 is a process water quality measurement system designed for drinking water and water distribution plants. The TW-100 monitors turbidity, color, free chlorine and pressure. This chemical free method reduces operating costs as it requires minimal maintenance and improves process ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Over the past several decades, HORIBA has designed and manufactured a complete line of high-quality non-dispersing infrared analyzers and analyzer systems. HORIBA has extended infrared gas analyzer technology to the continuous measurement of oil in water for process monitoring and waste water alarm applications. The OCMA oil content analyzers are a unique solution to the problem of continuously ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The FLIA-101 Series is a lineup of units for continuously analyzing fluorine ion concentrations in the comparatively broad area of industrial waste fluids. Using a Japan Industrial Standards (JIS) ion-specific electrode method, the FLIA-100 Series, accurately measures fluorine ion concentrations in water samples that are maintained at a stable level of 5pH-6pH. The FLIA-100 Series offers fully ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you