Process Water services for Water and Wastewater in USA

  • Premium

    Process Optimization Services

    Improve capacity and quality. Reduce production costs. Minimum consuption of energy, water and chemicals. Equipment adapted to process changes.

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

  • Premium

    Wet-to-dry Conversion Services

    Globally growing consumer demand for fresh water, and its sources diminished by the ever-changing climate, recurring droughts as well as consumption regulations make many wet-cooled power plants vulnerable to water scarcity around the world. Several industry analysts and many of our present customers agree, that where alternate sources for cooling ...

    By ENEXIO Water Technologies GmbH Office in Clearwater, FLORIDA (USA).

  • Refining

    Oil Refinery's consume a lot of water during normal operations.  Water that is increasingly in demand.  Just how much they consume and dispose of varies from refinery to refinery and the source making the calculations. The EPA states; Significant quantities of water — primarily for processing and cooling — are needed to ...

    By Water Vision Inc. (WVI) based in Conroe, TEXAS (USA).

  • i-Academy

    The Nijhuis i-ACADEMY training provide a global network opportunity to exchange best practices from around the world and share valuable process information. Training can be provided at our headquarters or at any location in the world and is always tailored to the requirements of the audience. You will receive practical information on key aspects ...

    By Nijhuis Industries Office in Chicago, ILLINOIS (USA).

  • Water & Waste Water

    The Water and Wastewater Division of John H. Carter Co. is the authorized distributor and service representative for the U.S. Filter/Wallace & Tiernan and USFilter/Stranco chemical feed products in Louisiana and Mississippi . Through a dedicated team of sales and service professionals the Wastewater Division offers local service and support ...

    By John H. Carter Company based in Baton Rouge, LOUISIANA (USA).

  • System Design Services

    SSI is a full service diffuser manufacturer and technical partner. We have significant technical capabilities including 2D and 3D drafting, biological simulation with Biowin™ software, CFD mixing simulation, FEM analysis of severe duty applications, Seismic calculations, buoyancy calculations, heat transfer calculations, and benchmarking. We ...

    By SSI Aeration, Inc. based in Poughkeepsie, NEW YORK (USA). from System Design Services Service line

  • Manufacturing Services

    Manufacturing plants often require significant quantities of water for production and equipment cleaning. They consume the second largest fraction of fresh water after the power & utilities industry. Irrespective of their size, plants are required to meet the stringent discharge norms and limits set by local and environmental agencies as well ...

    By MYCELX Technologies Corporation based in Duluth, GEORGIA (US) (USA).

  • Design Services

    We are often asked to suggest a process in order to cure a problem. As a company Dime Water is able and does offer design services. Given the fact that many of the units we build are custom made according to the customers’ needs and wishes our design services are required on a regular basis. Dime Water occasionally works with architects and ...

    By Dime Water based in Vista, CALIFORNIA (USA).

  • Immediate Assistance Services

    In the case of installations dedicated to potable water or production of process water for industries, a 24-hour assistance service defines our commitment of continuous support to our customers.

  • Services

    Red Service Light - Our systems are smart, so if something shakes them they will turn off the water and say “tank overfill” - just unplug it and plug it back in. The computer will reset… it’s that easy. No Water - We make water faster and hold more water in our chill tank than most other R/O systems on the market today, ...

    By Pure Water Technology, Inc. based in Redlands, CALIFORNIA (USA).

  • Bearing Design and Manufacture Services

    Bearings Plus can design standard and custom bearings, as well as repair existing bearings, to provide the right solution for your application. Our precision manufacturing capabilities and quality assurance systems achieve the tight tolerances required for peak performance.

    By Bearings Plus, Inc. based in Houston, TEXAS (USA).

  • Process Water Treatment Services

    Offshore platforms must be as self-contained as possible, including the ability to produce specialized water products for the various operations they perform. Ovivo has developed highly efficient, small footprint, process treatment methods for water used in crude oil desalting, LOSAL (EOR) and turbine washwater injection.

    By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA).

  • Mobile Recycling Units Services

    Mobile Recycling Units are fully self-contained and operated by our staff. Set up and breakdown times are minimal and in most cases are ready for operation within 15 minutes of arrival at the site. Mobile Systems make it easy and economical to process water at multiple sites on either the same installation or several installations with just the ...

    By Enviremedial Services, Inc. based in Oceanside, CALIFORNIA (USA).

  • Food Service Environmental Engineering Services

    Skelly and Loy provides comprehensive environmental engineering services to the food service industry. Services performed include wastewater engineering, waste reporting services, and potable/process water system engineering. In the wastewater arena, we have characterized and evaluated the wastewater from food production areas, performed ...

    By Skelly and Loy, Inc. based in Harrisburg, PENNSYLVANIA (USA). from Food Service Environmental Engineering Services Service line

  • Civil Engineering Services

    RJR Engineering’s roots are in classical civil engineering disciplines. Utility designs, site development, municipal consulting, private developers and design/build. This enables RJR to bring its experience from private and government sectors to achieve a cost effective project while meeting project objectives for the initial investment as ...

    By RJR Engineering, P.C. (RJR) based in Springville, NEW YORK (USA).

  • Silica Removal

    Electrocoagulation’s primary use has been to remove suspended solids from water.  Ultra-fine suspended solids.  EC however, also has the ability to remove silica.  Silica is found in many make up waters typically around 50 ppm in concentration.  This silica, along with hardness (calcium and magnesium), will concentrate ...

    By Water Vision Inc. (WVI) based in Conroe, TEXAS (USA).

  • Operational Services

    Veolia Water Technologies on-site specialists are available to assist with troubleshooting, sampling, start-up and commissioning.

    By Veolia Water Technologies North America based in Plainfield, ILLINOIS (USA).

  • Tank and Civil Construction Contracting Services

    Infrastructure and tanks are the body of our technology, and they need to be designed and built on long term quality standards. Our experience in contracting has concluded to trustworthy solutions for water tight constructions, convenient to plug our processes.

    By HydroThane STP BV Distributor in OREGON (USA). from Tank and Civil Construction Contracting Services Service line

  • Metering Services

    Meter Auditing: Inaccuracy in water use also results when the meters are outdated or in poor repair. This is a serious problem and needs to be addressed, promptly. Inaccurate water meters not only result in lost income for utilities, they also prevent utilities from realizing the potential for greater savings. Without accurate meters, water and ...

    By Water Management, Inc. (WMI) based in Alexandria, VIRGINIA (USA).

  • Water Recovery & Treatment Services

    ACM Ion Exchange solutions enable you to easily & affordably recycle your process water. Our 'closed loop' solutions, allow you to continuously recycle your process water, needing only to replenish water lost to evaporation.

    By ACM Technologies, Inc. based in Forest Hill, MARYLAND (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you