Tobee Water And Wastewater Equipment Available In Nepal
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc The 1.4460 Wear Ring Pos.502 / SAP-No. 131104718 is used for Andritz FP series Pump FP40-400. ANDRITZ FP Series Fan Pump is a low pulse and high efficient paper pulp pump, It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Sales7(at)tobeepump.com Tobee® offers Full range of Andritz S series pump spares, ACP series pump spares, FP series pump spares etc. Andritz replacement parts including: Open or Semi Impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), Pump casings, Casing cover, Front linings, Rear lininings, Stuffing box body, Shaft etc, The materials can be manufactured in cast iron, SS304L, SS316L, 1.4460 Duplex ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Tobee® Hi-seal expeller for 4/3D-AH slurry pumps, It is also one of the important parts of the slurry pump, and be combined with the decompression cover to form the dynamic seal of the slurry pump. It is one of the three types of shaft seals of the slurry pump. Below we will briefly introduce the expeller of the slurry pump: The standard material of the expeller of the slurry pump is generally ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
EAM028-A05 Slurry Pump Expeller is a very important 8/6E-AH slurry pump part if the expeller seal is selected for the slurry pump. It can not only help seal the slurry pump, but also reduce the centrifugal force. The design and material of expeller is significant to its service life because it is also one of the wet parts, Tobee offers expeller in cast iron and high chrome materials for options. ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Tobee® Slurry Pump Impeller Release Collar S239-U71542 also called Impeller Disassembly Device. The Impeller Release Collar S239 is used for 12/10ST-AH Slurry Pump, 10/8ST-AH Slurry Pump and 14/12ST-AH Slurry Pump. The basic code is 239, it allows impeller to be removed easily in large slurry pump. Slurry pump impeller release collar is located between labyrinth and shaft sleeve, it is made up of ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc Tobee® manufacture a range of replacement parts including impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), casings, casing cover, front lining, rear lining, stuffing box body, shaft etc which for Andritz S series pumps, ACP series pumps, FP series pumps etc Tobee® Pump is always making ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
C011E62 Slurry pump clamp washer is used for 4/3C-AH and 3/2C-AH Slurry Pumps, the Slurry pump clamp washer function is to fit the slurry pump bearing assembly to base, and slurry pump clamp washers are normally made in carbon steel plating ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc SPECIFICATIONS: Size: 6" x 4" Capacity: 36-250m3/h Head: 5-52m Speed:600-1400rpm NPSHr: 2-5.5m Handling solids: Max. 83mm Concentration: 58% Seal arrangements: Packing seal, Expeller seal, mechanical seal 6x4D-G Gravel Pump is designed specifically for continuous pumping of extremely ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.cc | www.hydroman.cn Mission 14x12x22 Pump SPECIFICATIONS: • Sizes from 8x6x18, 12x10x23, and 14x12x22 • Flow rates from a few gallons per minute up to 7,500 GPM • Head pressure up to 540 feet • Best utilized for applications requiring up to 500 HP • Hard iron for high chrome for options Mission Magnum ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc Bearing Housing E004M is the most important part for the Bearing Assembly E005M. Slurry Pump Bearing Housing basic part number is 004, it is container of bearings and shaft. There are four clamp bolts through the base which fasten the slurry pump bearing housing. Slurry pump bearing ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc G118-1-K31 Lantern Restrictor Ring is used for 14/12ST-AH Slurry Pump, and it also can be used for 10/8ST-AH and 12/10ST-AH Centrifugal Slurry Pump. Slurry pump lantern restrictor is one of shaft seal parts in full flow gland seal slurry pump where the flushing water is injected ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc Slurry pumps contain several wetted parts that are essential for operation, including the volute liner, throat bush, frame plate liner insert, and the impeller. The pump impeller is one of the most important parts of the slurry pump. It is located in the pump body on the shaft and ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Slurry Pump impeller is one of the most important parts of centrifugal slurry pump. Depending on site application, slurry pump impeller selection can be crucial to pump performance. Slurry applications can be especially hard on the impeller of slurry pump because of their abrasive nature. In order for your process to operate efficiently and stand up to the test of time, you must choose the proper ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Slurry pump is mainly composed of adjusting screw, base / (frame), bearing housing, bearing assembly/unit, bearing sleeve, bearing, bearing (drive end), clamp washer, clamp bolt, cover plate, cover plate bolt, cover plate liner, cover plate liner (half), screw/stud ,end cover, shim/(gasket), frame plate liner(FPL) insert stud, end cover set screw, expeller, expeller ring, rubber expeller ring, ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc 100RV-SP Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
DAM028A05 Expeller Wearing Spare Parts for 6/4D-AH Centrifugal Slurry Pumps Tobee® 6/4 D-AH Slurry Pump Spares DAM028A05 Expeller is a very important slurry pump part if the expeller seal is selected for the slurry pump. It can not only help seal the slurry pump, but also reduce the centrifugal force. The design and material of expeller is significant to its service life because it is also one ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Slurry Pump Shaft Sleeve D076 is a long type parts, it is also called quick - wear part, the shaft sleeve can be installed on 4x3D-AH Slurry Pumps and 6x4D-AH Slurry Pumps. The design and material of shaft sleeve is significant to slurry pump work-life, The slurry pump shaft sleeve protects pump shaft from abrasion and corrosion within seal arrangements. Slurry Pump Shaft Sleeve Parts are ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Tobee® Impeller D3147A61 is one of the most wear parts of 4x3D-AH Centrifugal Slurry Pump, this impeller is closed type with 5 vanes. And it is better high efficiency and corrosion resistant. Tobee® offers three different types of slurry pump impellers: open, closed, and semi-open, and slurry pump impellers are made of high chrome alloy, rubber, elastomer, polyurethane, ceramic and some other ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Slurry Pump Impeller D3147C26 for 4x3 slurry pump can also be called centrifugal pump impeller, is the key components of all slurry pumps. Centrifugal pumps need impeller to produce the centrifugal force which transfer the slurries.Tobee manufacture the metal impeller in A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 and so on. Tobee® offers three different types of slurry pump ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Tobee® Frame plate liner insert E4041A05 is one of the wetted parts on 6x4 AH Centrifugal Slurry Pumps, it is called slurry pump back liner, Rare Plate. It forms a pump chamber with throat bush and volute liner where the slurry would flow through them. We proudly manufacture quality Frame Plate Liner Insert and other replacement parts for some famous pump manufactures, which are 100% REVERSE ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you