Water And Wastewater Equipment Available In Serbia
-
ShowcaseManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
Based on the principle of optical pulse coherent Doppler shift detection, Wind3D 6000 can realize the fine detection of the 3D wind field of the middle and lower troposphere (including the atmospheric boundary layer). Highly pointed precision optical scanning mirror for 3D scanning detection. (DBS/VAD/PPI/RHI/CAPPI fixed-point scanning mode), the detection radius can be up to 6km. In order to ...
-
ShowcaseManufactured by Warden Biomediabased in UNITED KINGDOM
Biopipe+ has a wheel shape with internal fins and large openings, offering a protected surface area of 500m²/m³. The Biopipe+ is designed to provide a large protected surface area for the biofilm and optimal conditions for the bacteria culture when the media are suspended in water. A durable, rugged and highly efficient media for moving bed biological reactors (MBBR) and integrated ...
-
ShowcaseManufactured by Geodesign Barriersbased in USA
Home Flood Barrier, Affordable, Quick deployment. With the supports manufactured in one piece, without joints and axes, the E-series is our most cost-effective and affordable option. A perfect home flood barrier that comes in two dam heights: 16 and 24 ...
-
ShowcaseManufactured by Advanced Cyclone Systems, S. A. (ACS)based in PORTUGAL
ACS holds a patent of a recirculation system to increase the efficiency of cyclones. A mechanical ReCyclone® (ReCyclone® MH) is made up of a high efficiency Hurricane and a particle separator, placed downstream, called the “mechanical recirculator” (please see figure). In 2016, ACS introduced more compact recirculators that can be placed on top of cyclones, exempting the need ...
-
ShowcaseManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Megaflux-cMBR is an immersion type membrane module and cassette frame suitable for the MBR process of small to large capacity wastewater treatment. It is applied not only to general sewage treatment but also to wastewater treatment and water reuse. In addition, when replacing an existing membrane, it can be easily replaced as it is manufactured in the same ...
-
ShowcaseManufactured by Harp Renewables Limitedbased in IRELAND
The CX1, our smallest bio-digester in the range has the ability to digest up to 1000 litres a week. This digester may be suitable for a school, café or ...
-
ShowcaseManufactured by Lutz Pumpen GmbHbased in GERMANY
The MAGDOS LB solenoid-diaphragm dosing pump is a good-value alternative for simple and continuous dosing tasks. It is especially suitable for water treatment and the process industry. MAGDOS LB is available for seven capacity ranges. Double-ball valves ensure an accurate dosing. The dosing capacity can be adapted continuously from 0 – 100% through the stroke frequency. MAGDOS is a compact ...
-
ShowcaseManufactured by Regulator-Cetrisabased in SPAIN
The Eddy Current Separator (R-SPM) is able to separate the Non-Ferrous metals from the rest of the materials due to its studied magnetic assembly called the “Inductor Drum”, which rotates at high speed. When a Non-Ferrous Metal crosses the induced magnetic field, it undergoes a repulsion effect and jumps a certain distance ahead of the Foucault drum and away from the rest of the ...
-
ShowcaseManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
The conical pipe plugs are suitable for the safe blocking of various types of pipes. A characteristic of the cone sealing bags is the high flexibility of use on almost all types of pipeline, e.g. open U, linzer, drago, mouth type, circular, square, rectengular, egg-shaped, kite shape and many others pipelines. They can be used in many different diameters ranges from 150 to 2200 mm. with good ...
-
ShowcaseManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Artem Gun is a unique, off power smoke generator ideal for creating large volumes of smoke for applications such as fire training, public order training, indeed any application where complete portability is a requirement. Using conventional Taymar type gas cartridges as the heating source (available worldwide) and a Concept Artem Smoke Canister, the Artem Gun is incredibly straight forward to ...
-
ShowcaseManufactured by Aljon by C&C Manufacturing, LLCbased in USA
The Aljon 580CL is a full featured twin-ram car logger/baler is capable of efficiently processing 20-25+ complete end of life cars, vans, and pick-ups (including engines, transmissions, and running gear). Power for the machine is provided by a proven Volvo-Penta Tier 4 Final diesel or by an electric motor. The comfortable climate controlled cab is equipped with Aljon’s exclusive monitoring ...
-
ShowcaseManufactured by Ecomesurebased in FRANCE
We spend more than 80% of our time indoors. However, indoor air can be up to eight times more contaminated than outdoor ...
-
ShowcaseManufactured by Access Sensor Technologies LLCbased in USA
Our flagship wearable sampler. Collect filter-based air samples on to 37 mm filter media along with extensive sensor data to inform you on motion, compliance, environmental factors, particulate matter, carbon dioxide and tVOC and NOx. Access Sensor Technologies’ UPAS is a compact, filter sampler built around ultrasonic pumping technology. The UPAS is smaller, lighter, quieter, ...
-
ShowcaseManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
-
ShowcaseManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT crawler-truck is a CPT penetrometer rig based on a truck-chassis provided with a crawler undercarriage. The crawler-truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT crawler-truck, either an electrical or mechanical ...
-
ShowcaseManufactured by Octaform Systems Inc.based in CANADA
QuickLiner is a durable PVC panel system. It easily fastens to existing structures, protecting your walls and ceilings from corrosive elements while creating a clean, bright environment. Whether it is moisture or harsh cleaning chemicals, QuickLiner™ is your best line of ...
-
ShowcaseManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The robust system for efficient and stable characterization of high matrix samples: Outstanding plasma robustness for high matrices. Minimized drift at changing matrix load. Efficient interference management with outstanding ease of use. ...
-
ShowcaseManufactured by ESCO International (EI)based in UNITED KINGDOM
The skid mounted ozone generator systems are specifically designed and manufactured to meet the disinfection and sanitization requirements for controlled water quality standards for various industries, such as: bottling and rinsing plants, food and beverage industries, pharmaceutical and chemical processes, ultra pure water in electronic and pharmaceutical sectors, swimming pools and hot water ...
-
ShowcaseManufactured by OSEI - Oil Spill Eater International, Corpbased in USA
Oil Spill Eater II (OSE II) is the world’s most environmentally safe and cost effective bioremediation process for the mitigation of hazardous waste, spills and contamination virtually anywhere of any size, large or ...
-
ShowcaseManufactured by KI Canada Ltd.based in CANADA
The PRM-9000 includes the same two-inch (50.8 mm) pancake Geiger detector tube that is the gold-standard for surveying areas for potentially harmful ionizing radiation levels and for detecting radioactive contamination of packages, items, equipment and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you