F&J Water And Wastewater Equipment Available In St. Helena
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model “3.2” Series. Plastic Cased. Dimensions:. Diameter = 3.21” ± 0.01 (81.5mm ± 0.25mm). Height = 2.32” ± 0.01 (58.9mm ± ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model “M” Series. Metal Cased. Dimensions:. Diameter = 2.51” ± 0.01 (63.8mm ± 0.25mm). Height = 1.01” ± 0.01 (25.7mm ± ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-AB-25L-BL is a lightweight, small footprint, DC voltage powered air sampling system operable from (1) on-board 4500 mAh NiMH batteries, (2) line power, or (3) vehicle cigarette lighter ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-40L-400 is a lightweight, small footprint, DC voltage powered air sampling system operable from (1) on-board 4500mAh Nickel Metal Hydride battery, (2) line power or (3) an external auxiliary 12VDC input port. The DF-40L-400 is well suited for emergency response sampling activities where users do not know whether line power will be available. Typical operating time from on-board ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-14MHT is a heavy-duty hand truck mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4′ to 7′ (122 cm – 213 cm) above floor ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-14ME is a cart mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 122 cm - 213 cm (4' to 7') above floor level. The LV-14ME air sampler includes a 1/4 HP oil-less, carbon vane vacuum pump with a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The container for the charcoal is an all-metal 8-ounce can. The nominal dimensions on this can are 4 inches in diameter x 1-1/8 inches deep. The top of each completed canister is sealed in place using a 13-inch strip of vinyl tape. Red vinyl is available as a standard. Other types of tape or specific colors can be supplied upon ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-EDL-300WE-HT is a powerful small foot print light weight AC/DC powered air sampling system operable from (1) line power or (2) an optional 24VDC external power source. This powerful air sampler is the lightest weight low volume air sampler available having similar flow rate capacity. This model is designed to operate in ambient temperature conditions as high as ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model DFHV-1E digital high volume air samplers provide simplicity of operation and improved accuracy. This model features a motor cooling fan within the motor housing, digital flow measurement, elapsed time and accumulated volume measurement capability. It has a bright LED display and a four button keypad. Various flow and volume engineering units are available for selection. The pump is mounted ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Applications / Characteristics: Increased chemical resistance used to monitor airborne particulates. Does not adsorb acid ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model GAS-EDL-1E is a powerful small foot print light weight AC/DC powered air sampling system operable from (1) line power or (2) an optional 24VDC external power source. This powerful air sampler is the lightest weight low volume air sampler available than can achieve flow rates > 100 SLPM for typical NPP ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model: CSM” Series. Plastic Cased. Dimensions:. Diameter = 2.25” ± 0.01 (57.2mm ± 0.25mm). Height = 1.02” ± 0.01 (25.9mm ± ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model “M5” Series. Metal Cased. Dimensions:. Diameter = 2.52” ± 0.01 (64.0mm ± 0.25mm). Height = 1.62” ± 0.01 (41.1mm ± ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model “M5” Series. Metal Cased. Dimensions:. Diameter = 2.52” ± 0.01 (64.0mm ± 0.25mm). Height = 1.62” ± 0.01 (41.1mm ± ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J model LIBATBANK-12V is a light weight one man carry 12V battery bank for use with 12 VDC powered F&J air samplers. The battery bank is approximately 35 Ah and is housed in a small foot print water tight ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model “M5” Series. Metal Cased. Dimensions:. Diameter = 2.52” ± 0.01 (64.0mm ± 0.25mm). Height = 1.62” ± 0.01 (41.1mm ± ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-EDL-28B is a powerful small foot print light weight AC/DC powered air sampling system operable from a line power source. This powerful air sampler is light weight for a low volume air sampler available having similar flow rate capacity. The pump is mounted on a base plate within a weather resistant aluminum environmental enclosure having four rubber feet. Handles are provided on ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model “M” Series. Metal Cased. Dimensions:. Diameter = 2.51” ± 0.01 (63.8mm ± 0.25mm). Height = 1.01” ± 0.01 (25.7mm ± ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model GAS-22E Global Air Sampling System is a microprocessor controlled low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line orifice, by varying the flow through a bypass valve into the pump. This system allows the pump ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model “3.1” Series. Plastic Cased. Dimensions:. Diameter = 3.44” ± 0.02 (87.4mm ± 0.51mm). Height = 1.24” ± 0.02 (31.5mm ± ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you