Hydreka Water And Wastewater Equipment
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The TraceFLO is a multiparameter (among Fluorescein, Rhodamine or Chlorophyll A) hydrogeologic tracer used for: Water tracing / Dye tracing. Dynamic resource management. Karstic system ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The Doppler Velocity Probe DVP is an excellent tool for measuring flows in sewers and waste water treatment plants, irrigation canals, rivers and all open channel applications (clear, contaminated and filtration ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
For insertion probe calibration. Any ultrasonic flowmeter checking. Ideal training equipment for your team. Calculate offset and ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The HydrINS® 2 flowmeter, developed by Hydreka, is an easily deployed and cost effective flowmeter providing highly accurate bi-directional flow measurement, for water distribution and raw water pipelines. The highly versatile unit is widely used throughout the world and available in various lengths, equally well deployed for permanent or portable ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
TurbiLog-Coming later this year0 to 100NTU specification with resolution of 0.01Serial encoded output in format to be defined by HWM –nominally RS232 “like” but with different voltage levels.Push button or other method to recalin the field against distilled water sampleAbility to recalagainst a second reference point (10 NTU) based on polymer beads.Power consumption to be ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The CPI 2 hydrant tester measures several flow/pressure combinations typical of a hydrant. Its direct application is checking the operation and compliance of hydrants. Its advanced application is to provide several flow/pressure combinations for the fine setting up of the mathematical model of the system. The tester has a mechanical meter and a piezometric pressure measurement system, and is ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The HYDREKA rain gauge is a reliable and robust sensor that provides precision rainfall measurement on a given site.A heated version is available to record winter precipitation (hail or snow). Based on small buckets that tip at 0.2 mm, its dry contact signal (Reed bulb type sensor) can be connected to one of the HYDREKA standalone data recorders (Lolog, Vista +, Octopus 4, Octopus ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The BubbleFLO 2 flowmeter is used for height measurement and flow calculation in open channels, water-treatment plants, wastewater networks. Paired with a data logger (Winfluid NG interfaced), the user can program their height/flow hydraulic table (directly on the keayboeard or by PC) to get a flow calculation. BubbleFLO 2 can also be used with Hydreka’s overflow shutter. In addition to 1 ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
District and zone monitoring, overflow. Level and pressure monitoring (Water system, underground and surface water). Flow monitoring. Can be connected to a wide range of ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
This ultra-compact and lightweight radar flowmeter offers a new approach into self-monitoring in open channel and wastewater ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The HYDREKA ChronoFLO 2 flow meter uses the principle of measuring ultrasonic wave transit times to measure flow, and therefore does not intrude on pipe systems under charge. The ChronoFlo flow meter is housed in a waterproof case, with military-type connectors. As standard, it has 2*4-20 mA intputs, 2*on/off outputs (alarms, sampling or connection to SCADA systems), an external power supply ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
Created specially to record sudden pressure changes on the drinking water networks, this logger allows you to make 20 samples per second. Self contained on battery, housed in a waterproof case, IP 68, memory capacity of 250 000 (standard), up to 1 billion data recordings, our logger is perfectly suitable to plot pressure waves generated by pumps, pressure reducers or ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
Sensor diameter: 15 mm (0.6") Pipe diameter range: 3" to 12". Ease of installation with no interruption to supply. Accurate measurement on low velocities: +/- 2 mm/s at 2 cm/s (0.006 ft/sec at 0.066 ft/sec). "Hot tap" installation (3/4"BSPorl\IPT). Self checking of operation in accordance with OIML R49 Type P (Permanent) requirements. ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The PTX/PDCR 1830 piezometric probe provides direct pressure measurement and derives water level within ± 0.08% of the full scale value. Several measurement scales are available, from 75 mbar to 60 bar. The piezometric probe can be used with a HYDREKA standalone data recorder (Lolog, Vista +, Octopus 4), or one with a communication capability (Octopus LX, Octopus ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The DF junior comprises only one sensor, an extremely sensitive accelerometer (CSH 191),that detects the vibration generated, even in difficult environments. It is the essential tool to identify the positions of leaks on a drinking water distribution system. The DF junior is supplied with a control unit (signal amplitude and battery voltage displayed), hi-fi earphones, a sensor mounting plate ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The HYDREKA sampler comprises a refrigerated chamber, with a polythene or glass bottle, equipped with a HACH SIGMA AS950 sampling unit. A folding transport trolley, with inflatable wheels, is also available. The 12 V power supplies for the cold unit and the sampler head are separate, in order to allow all possible power supply combinations (mains power and/or ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The HydrINS® 2.1 flowmeter, developed by Hydreka, is an easily deployed and cost effective flowmeter providing highly accurate bi-directional flow measurement & temperature measurement, for water distribution and raw water pipelines. The highly versatile unit is widely used throughout the world and available in various lengths, equally well deployed for permanent or portable ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
Applications; Pipe internal diameter measurement, needed for insertion magmeter installation (e.g. HydrlNS 2/HydrlNS 2 Mini). Real internal diameter measurement through service ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
Pressure control can be the most immediate and the simplest method of reducing water leakage and the frequency of pipe bursts. The Pegasus + controls system pressure downstream from the pressure stabiliser according to the zone flow demand (flow rate modulation) or according to a user-programmed daily or weekly schedule. The system is equipped with a self-learning function equipped with ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The PermaNet F combines Permalog leak noise sensor and our versatile telemetry data technology to create a fixed network to monitor leakage. The system works in conjunction with Google Maps technology to provide a live on screen tracking, allowing leakage teams to respond quickly to problem areas and bring them under control ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you