Soggia Water And Wastewater Equipment
-
Manufactured by Soggia Water Pumpsbased in ITALY
Range of surface multistages pumps with vertical axis completely made in stainless steel AISI 304, built for an high resistance against corrosion. Materials are certified for drinkable water applications. Basement, pump body, impellers and diffusers are built in stainless steel AISI 304; on request available in stainless steel AISI 316. Coupling and motor bracket are made in cast iron G25. VSS ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Submersible water pumps full cast iron, can get maximum flow of 620 l/min with maximum head of 9 meters. Those pumps are suitable to empy cellars, basements and tanks in domestical and industrial application. All DRVX pumps are supplied with float switch in the single-phase version. This pump is widely used in handcrafts and industry to dispose of clean or dirty water or other liquids. They are ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Multistage vertical pumps from 40 up to 6 impellers. The SMV serie develops good hydraulic performances, a very low noise while running and are suited for use in civil and industrial applications, in high pressure irrigation and car washing systems. We always recommend the use with liquids chemically and mechanically cleaned, and with temperatures not higher than + 80 ° ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Single impeller centrifugal monoblock electropumps. The serie SCM performs with night water capacity related to low pressions and medium/low power, Suited for use in industrial, civil and agricultural applications, heating systems and water supplier. It is recommended that these pumps are used to carry only chemically pure liquids, with temperatures not higherthan ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Working Data: Flow up to 5500 l/min (330 m³/h ). Head up to 333 meters. 2850 r.p.m.. MOTOR power up to 150 kw. Maxixum starting per hour: 7. Water temperature: from 0°C to 30°C. Maximum quantity of sand: 40 ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Series of submersible pumps 6" completely in AISI 304, designed and built for maximum resistance against sand and other impurities. Materials certified for use in drinking water that allow the pump to run dry without even deteriorate. The supports are made of steel AISI 304, obtained with casting process, ensure extreme robustness and reliability to the product. 6FX pumps are supplied with ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Single impeller centrifugal monoblock electropumps. The serie SCM performs with hight water capacity related to low pressions and medium/low power, Suited for use in industrial, civil and agricultural applications, heating systems and water supplier. It is recommended that these pumps are used to carry only chemically pure liquids, with temperatures not higher than ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Twin impeller centrifugal waterpump. SCB performs with high water capacity related to good pressure and medium/low power. Suited for use in industrial, civil and agricultural applications, heating systems and water supplier . It is recommended that these pumps are used to carry only chemically pure liquids, with temperatures not higher than ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Submersible water pumps for waste water with double chamber and pump body in Cast iron. Available in two versions, with Vortex or twin-channel impellers can get maximum flow of 700 l/min with maximum head of 16 meters. Those pumps are suitable to empy decantation and sewage pits, as they can move dirty water with solid matters up to 50 mm, in domestically and industrial application. All SVG pumps ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Submersible water pumps for waste water with double chamber and pump body in Stainless Steel. Available in two versions, with Vortex or twin-channel impellers can get maximum flow of 700 l/min with maximum head of 16 meters. Those pumps are suitable to empy decantation and sewage pits, as they can move dirty water with solid matters up to 50 mm, in domestic and industrial application. All SVX ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
8” semiaxial submersible pumps in cast-iron, New concept of water pump with a single type of diffuser. Other feature is the new exagonal shaft that makes maintenance much easier. Rubber bush guides coupled with chromed bush with a strong thickness granting continuous duty even in the most difficult condition and with a huge quantity of sand in the water. Impeller’s wear ring in ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Series of submersible pumps 4 "newly developed, designed and built for maximum resistance against sand (up to 250 g / m³) and other impurities. Materials certified for use in drinking water that allow the pump to run dry without even deteriorate. The supports are made of steel AISI 304, obtained with casting process, ensure extreme robustness and reliability to the product. The new design of ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Submersible water pumps completely in Stainless Steel to drain clean water supplied with double mechanical seal up to 2 mm. Can get maximum flow of 175 l/min with maximum head of 10 meters. Those pumps are suitable to empy cellars, basements and tanks in domestical and industrial appliction. LOW pumps are supplied in manual version (LOW), with standard float switch (LOW A) or with vertical float ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Series of submersible pumps 3" newly developed, designed and built for maximum resistance. The supports made of brass ensure extreme robustness and reliability to the ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Peripheral pumps with axial intake and upward-facing radial delivery. The main feature of these pumps is that they are capable of generating a medium-high discharge head with a relatively modest power consumption. These pumps are particularly suited for pumping up and distributing water in domestic water supply systems in houses, villas, small properties, and gardens, as well as for providing ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Series of submersible motors 8 "rewindable water bath, asynchronous 2 poles, with squirrel-cage rotor. Winding wire wet PVC, easily retractable. Durable MOTORs oversized to withstand heavy loads and long life. The radial and axial Bearing are Mitchell and lubricated by water inside the motor; this allows a long period of operation without any maintenance. Mechanical Seal mounted on driving shaft ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
The variable speed BANKS, equipped with two water pumps and one inverter SPEEDMATIC SET, manages the system group through frequency modulation. BANKS is available in Single-phase and Three-phase versions. This system grants a constant pressure in the group modulating the speedy of the pumps depending the water quantity required (saving energy). The device SET drives two water pumps. The first ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Submersible water pumps to drain waste water with grinder and double chamber and pump body in cast iron. Can get maximum flow of 350 l/min with maximum head of 24 meters. Those pumps are suitable to grinding and pump out of lavatory/foul water with floating solids and fibre in domestically and industrial application. All SVT pumps are supplied with float switch in the single-phase ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
6” semiaxial submersible pumps in cast-iron, New concept of water pump with a single type of diffuser. Other feature is the new exagonal shaft that makes maintenance much easier. Rubber bush guides coupled with chromed bush with a strong thickness granting continuos duty even in the most difficult condition and with a huge quantity of sand in the water. Impeller’s wear ring in rubber. ...
-
Manufactured by Soggia Water Pumpsbased in ITALY
Series of submersible motors 6 "rewindable water bath, asynchronous 2 poles, with squirrel-cage rotor. Winding wire wet PVC, easily retractable. Durable MOTORs oversized to withstand heavy loads and long life. The radial and axial Bearing are Mitchell and lubricated by water inside the motor; this allows a long period of operation without any maintenance. Mechanical Seal mounted on driving shaft ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you