Water & Wastewater Equipment in Croatia

197 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • In: Europe ×

  • In: Croatia ×

Model GA-40Tplus - Gas Analyzer With Built-in Sample Conditioner

by madur Polska Sp. z o.o.     Distributor in Zagreb, CROATIA

Professional flue gas analyser that combines high quality of sample conditioning with great measurement accuracy contained in a compact soft casing. Analyser is equipped with heated hose with heated filter, built-in high efficient condensation dryer. It can be fitted with up to 9 sensors (electrochemical cells and NDIR sensors). Has built-in ...

HORIBA - Model OPSA-150 - Organic Pollutant Monitor

by HORIBA Europe GmbH     Office in CROATIA

The OPSA-150 is a new organic pollutant monitor that uses HORIBA's proprietary Rotary Cell Length Modulation, a measuring technique incorporating 25 years of expertise. The unit can be used as an organic pollutant monitor at drainage systems for determining compliance with COD monitoring regulations, for monitoring quality of water measuring ...

HORIBA - Model TW-100 - Water Distribution Monitor

by HORIBA Europe GmbH     Office in CROATIA

HORIBA’s TW-100 is a process water quality measurement system designed for drinking water and water distribution plants. The TW-100 monitors turbidity, color, free chlorine and pressure. This chemical free method reduces operating costs as it requires minimal maintenance and improves process control.

ChlorineTrak - Model 760S - Chlorine Gas Mass Flow Meters

by Sierra Instruments, Inc.     Distributor in CROATIA

The ChlorineTrak 760S has been specifically designed to perform as an accurate and cost-effective mass flow measurement solution for chlorine injection processes found in typical waste-water treatment applications. Prior to the ChlorineTrak, the corrosive nature of chlorine gas (particularly in the presence of moisture) required extremely ...

Sequenced Batch Reactors (SBR)

by Biogest International GmbH     Office in Virovitica, CROATIA

General Features of the SBR Technology for WWTP's are Extremely effective biological treatment concept. Perfectly useable for domestic and industrial wastewater.

HORIBA - Model HT-110 - Online TOC-Analyzer

by HORIBA Europe GmbH     Office in CROATIA

The continuous online TOC-Analyzer HT-110 is suitable for the measurement ot total organic carbons in Purified Water (PW), Water For Injection (WFI) and Highly Purified Water (HPW). The unit is operating according to USP 643. It is applicable for pharmaceutical and/or semiconductor manufacturing. The measuring principle is based on UV-Oxidation ...

HORIBA - Model OM-51 - Portable Dissolved Oxygen Meter

by HORIBA Europe GmbH     Office in CROATIA

This field-type dissolved oxygen meter measures dissolved oxygen concentration (DO), oxygen concentration (O2), saturation (SAT.RATIO) and temperature of water solutions. It uses a laboratory sensor to enable BOD measurement. Waterproof construction enables use at virtually any measurement site. This meter is being used in research institutions, ...

HORIBA LAQUA - Model F-70 Series - Benchtop pH/Water Quality Analyzer

by HORIBA Europe GmbH     Office in CROATIA

The HORIBA LAQUA F-70 series marries advanced technology with stylish design and an easy-to-use touch screen interface. The LAQUA series was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response ...

OCMA - Model 550 - Oil Content Monitor

by HORIBA Europe GmbH     Office in CROATIA

OCMA-550 to measure residual oil on components and concentrations of oil adhered on solids such as soil. Measurement can be easily made only by injecting the extracted water sample into the attached cell and setting it to the equipment. This model features a simple design which allows opening/closing of the door to setting of cell with just one ...

Hyperjet - Self-Suction Aerator and Mixer

by Biogest International GmbH     Office in Virovitica, CROATIA

Ideal mixing and aeration system for small-sized wastewater treatment plants.No additional air blower required - self suction of airCompletely made of stainless steel (AISI 304 or better). No danger of blockage or plaiting of fibre-solids. Gear-drive requires a minimum of maintenance (only one oil-change every two years). Low speed for ...

Oxymax - Model COS51D - Digital Oxygen Sensor

by Endress+Hauser     Office in Zagreb, CROATIA

Memosens amperometric oxygen sensor for water, wastewater and utilities. Oxymax COS51D is a reliable and highly accurate oxygen sensor for all kinds of water & wastewater applications (including hazardous areas). Designed to be low-maintenance with a long operating life, the sensor offers outstanding value for money. Thanks to Memosens digital ...

Model CA80COD - COD Analyzer Liquiline System

by Endress+Hauser     Office in Zagreb, CROATIA

Analyzer for chemical oxygen demand in environmental monitoring, industrial and municipal wastewater. Liquiline System CA80COD offers constant online measurement of the chemical oxygen demand (COD). It supports you in monitoring the cleaning capacity of wastewater treatment plants and enables load-based billing for industrial dischargers. ...

HORIBA - Model OCMA-25 - Automatic Oil Content Monitor

by HORIBA Europe GmbH     Office in CROATIA

Over the past several decades, HORIBA has designed and manufactured a complete line of high-quality non-dispersing infrared analyzers and analyzer systems. HORIBA has extended infrared gas analyzer technology to the continuous measurement of oil in water for process monitoring and waste water alarm applications. The OCMA oil content analyzers are ...

HORIBA LAQUA - Model DS-70 Series - Benchtop Conductivity Meter

by HORIBA Europe GmbH     Office in CROATIA

LAQUA DS-70 series measures Conductivity, Resistivity, Salinity, TDS and Temperature simultaneously and the Model DS-72 complies with industrial pharmacopoeias standard (JIS, USP, EP, JP and CP). The meters’ auto diagnostic function allows the user to make sure that the instruments will always give high performance and reliable measurements. ...

Model IN - Single Stage Volute Pump

by Croatia Pumpe Nova Ltd.     based in Karlovac, CROATIA

Pumps are relised in accordance with international standard ISO 2858. They have normal dimensions and interchangeable regardless to pump manufacture, without changing conectors and fundamentals. Hidraulic characteristic are similar for equal dimensions.

PCE - Model 228 - pH meter

by PCE Instruments UK Ltd     Office in Zagreb, CROATIA

The PCE-228 pH meter is an easy to use handheld device for measuring pH, mV and °C. With the PCE-228 pH meter, both temperature and pH values can be directly stored onto a SD card (in Excel format), or transferred to a PC through an RS-232 interface. An optional software and data cable for the PCE-228 pH meter are available as optional ...

HORIBA - Model FLIA-101 Series - Fluoride Ion Analyzer

by HORIBA Europe GmbH     Office in CROATIA

The FLIA-101 Series is a lineup of units for continuously analyzing fluorine ion concentrations in the comparatively broad area of industrial waste fluids. Using a Japan Industrial Standards (JIS) ion-specific electrode method, the FLIA-100 Series, accurately measures fluorine ion concentrations in water samples that are maintained at a stable ...

HORIBA - Model ES-51 - Portable Conductivity/Resistivity/Salinity Meter

by HORIBA Europe GmbH     Office in CROATIA

This conductivity meter measures conductivity, resistivity and salt in water solutions. It is a field type, with a waterproof case, and is easy to hold and move. It enables anyone to conduct high-precision measurement, anytime and anywhere. Naturally it can be used by specialists at research institutions, but it can be also be used in wide range ...

HORIBA - Model HE-960HI - Sanitary Conductivity Meter (Wide-Range Type)

by HORIBA Europe GmbH     Office in CROATIA

The HE-960HI is a wide-range type sanitary electric conductivity meter that can measure over a wide range from manufacturing water up to 500 mS/cm, and enables advanced concentration management through abundant outputs. Cleaning-in-Place (CIP) terminal management and a reduction in cleaning solutions is also achieved through accurate surface ...

Endress+Hauser - Model CCS120 - Analog Total Chlorine Sensor

by Endress+Hauser     Office in Zagreb, CROATIA

CCS120 is the analog sensor for standard measurement of total chlorine. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance effort.

Need help finding the right suppliers?

Let the XPRTs do the work for you