Water And Wastewater Equipment In Ivory Coast
-
ShowcaseManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The handy Mini Series consists of the following individual components which can be assembled as complete ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The DILO manifolds help to significantly increase the efficiency of gas handling with service carts in the GIS unit production or at utility companies. The standard DILO manifolds are equipped with three DN20 connections as well as a DN20 or DN40 connection to the service cart. Thus, it is possible to recover, to evacuate or to fill three gas compartments at the same ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The test pressure for gas analysis in medium voltage switchgear is often too low. For this reason the compressor unit is needed to compress the gas to be measured so that there is sufficient pressure for the gas measuring devices connected downstream from the compressor unit. As the device is leak-tested there are no SF6 emissions. The oilfree compression avoids the SF6 test gas from being ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The mixing unit has been specially developed for the handling of gas mixtures based on C4-FN and their specific requirements. A total of four gas components can be mixed. The gas mixture is circulated by the compressor to generate a homogenous mixture. Using the integrated compressor, the generated gas mixture can be filled directly into gas compartments or for transportation, stored into ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Water-cooled heat exchanger. Cooling in continuous operation. Circulation pump for water cooling: 30 m³/min. Gas purification via particle filter (pore size 1 µm). Cooling capacity: ~ 45 kW. Operation via touch panel. Optional oilfree compressor 11.4 m³/h with 30 l dry filter for gas ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For determination of moisture Moisture is the most important criteria for the determination of the gas quality. This device has been designed specially for SF6 moisture measurements. It also shows a higher resistance against contamination and SF6 decomposition products than conventional moisture sensors and even minimises the usual long-time drifting. The integrated electronic flow meter supports ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
This series is very powerful and allows quick evacuation of large gas compartments. A vacuum pump combined with a Roots pump enables to obtain a final vacuum of 2x 10-2 mbar. Thus not only air but also moisture is removed from the circuit breakers. Therefore the subsequent filling process is prepared perfectly. Three coupling connections (DN20 and 2 x DN40) allow the evacuation of two gas ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Point level switch for liquids in high-temperature applications. Liquiphant FT70 is a point level switch for use in hazardous areas with all international certificates. FTL70 is especially designed for applications with high process temperatures up to 280°C and can be used for Safety Instrumented Systems up to SIL2, in homogeneous redundancy up to SIL3. An integrated second line of ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
For standard hygienic and aseptic applications in the Food & Beverages and Life Sciences industries. This iTHERM thermometer has been designed to meet the basic requirements of the Food & Beverages and Life Sciences industries at the best price. It offers a variety of versions within a clearly segmented standard product. The result: Time and cost savings by simple and fast product ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 10m. The Prosonic FMU42 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
CCS120 is the analog sensor for standard measurement of total chlorine. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 20m. The Prosonic FMU44 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Prosonic FMU90 separated version with field housing or top hat rail housing for control cabinet instrumentation are suited for continuous, non-contact level measurement of fluids, pastes, sludge and powdery to coarse bulk solids. Also the flow measurement in open channels and weirs is possible as the simultaneous measurement of level and flow in a storm water overflow basin with only 1 sensor. Up ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Colorimetric system for monitoring of drinking water, mineral water or raw water for food production. Liquiline System CA80NO offers precise, regulation-compliant online measurement of nitrite. It supports you in meeting the specified limits in drinking water, mineral water or food production. Like all Liquiline System analyzers, it enables plug & play of up to four Memosens sensors – ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Self-cleaning crossflow filter for pressurized pipe sampling. Stamoclean CAT411 provides bacteria-free micro filtration of samples from pressure pipes. Its self-cleaning crossflow filter avoids filter blocking, thus increasing your process safety. Thanks to a minimized dead volume, it reflects changes of your process promptly and shortens the response time of your downstream measuring devices. ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Acquires data from field instruments. The Tank Scanner NXA820 scans parameters from tank gauges and performs tank calculations as one part of Tankvision. Tankvision is a tank inventory system which is operated by a standard web browser and does not require proprietary software or licensing costs. Tankvision is based on a distributed architecture on a local area network (LAN). Due to its modular ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
The new Liquiphant FTL51 is specialized for the process industry and already developed according to IEC 61508 to be used directly in SIL2 and SIL3 applications without big efforts. You conduct periodic proof tests according to SIL or WHG simply mobile with an intuitive wizard. At the end you receive an automated documentation. Liquiphant measures reliably and is not affected by changing media ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Ion-selective Memosens sensor for the wastewater industry. ISEmax CAS40D is the right technology for trend measurement directly in the basin. It helps you to increase the efficiency and reduce the energy costs of your aeration processes. The sensor works without reagents saving you even further money. With its robust ion-selective membranes and excellent self-cleaning, it eases your maintenance ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens optical oxygen sensor for hygienic applications in Life Sciences, Pharma and Food. The Memosens COS81D optical oxygen sensor is available in 120 ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Point level switch with extension tube for liquids especially in the food and life sciences industry. Liquiphant FTL51H is a point level switch with extension tube for use in hazardous areas with all international certificates. Especially useable in the food and life sciences industry with hygienic certificates (3-A, EHEDG, ASME BPE). FTL51H offers functional safety SIL2/SIL3. Reliable ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you