Water And Wastewater Equipment In Singapore
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Ovivo M-TADTM (Mechanically Thickened Aerobic Digestion) process is a controlled aerobic digestion system specifically designed to handle sludge produced by mechanical thickeners such as gravity belt thickeners or rotary drums. The M-TAD system utilizes two or more aerobic digesters to optimize aeration requirements, helping to keep equipment costs to a ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork extensive range of valve position sensors offer visual indication with digital, and analogue feedback and HART protocol. Our Soldo limit switch range is based on our unique twin shaft design which enables easier and safer disassembly for installation and maintenance. All designs are corrosion resistant and suitable for a wide range of environments in hazardous and safe areas. Material ...
-
Manufactured by Luwa Air Engineering - a Nederman companybased in SWITZERLAND
The Luwa Rotary Pre Filter (RPF) is the first component in your two-stage filter system. The RPF can also be used as the single stage air filtration for room return air in production areas such as wool or man-made fibers, where no high amount of dust is generated. Its proven design has a small space requirement and a very low pressure drop. Pressure fluctuations within the air cleaning process ...
-
based in USA
AvistaClean MF 1000A powder is a synergistic cleaner blend formulated to remove organic and particulate foulants from chlorine tolerant microfiltration (MF) and ultrafiltration (UF) membrane surfaces and pores. This cleaner is a one-step cleaning process that can be used sequentially with AvistaClean MF 3000 when the foulant contains calcium carbonate and/or metals. AvistaClean MF 1000A has ...
-
Manufactured by RS Technik AGbased in SWITZERLAND
RS PolyLiner is a liner technique for sewer pipes. For this system, the RS PU-Liner is impregnated with the polyester resin MaxPol® in the factory. In a refrigerated truck, the impregnated liner is delivered to the site and is directly inversed. This system is available to customers who want to supplement existing RS Technik systems with the ability to rehabilitate pipes with larger diameters ...
-
Manufactured by Industrie De Nora S.p.A. | De Nora Water Technologiesbased in ITALY
Designed for large capacity disinfection needs, the RIO Grande is the superior alternative to generating large volumes of disinfection chemistry at minimal cost. Remarkable cell design with better salt and power efficiencies, reduced maintenance, and MAXIMUM flexibility makes getting rid of bulk delivered chemicals or chlorine gas easier than ever. Multiple systems can be used in parallel ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Capacity range 4 ml/h - 80 l/h, 25 – 2 bar. The gamma/ XL is a smart, connectible solenoid-driven metering pump that is setting new standards in terms of productivity, reliability and cost-effectiveness. ...
-
Manufactured by Cathodic Marine Engineering Pte Ltd.based in SINGAPORE
Ships are dependent on the seawater upon which they travel for a variety of reasons. One primarily function seawater serves is to cool the engine and parts of the ship while it’s operating. The used seawater is then discharge back into the sea and new seawater taken in, forming a continuous flow of exchange of saline water between the ship and its surrounding aqueous environment. Despite ...
-
Manufactured by LiqTech International A/Sbased in DENMARK
The high flux CoMem asymmetric silicon carbide (SiC) membrane from LiqTech is designed for removal of suspended solids as well as oil droplets and oil-emulsions from solutions. The Co Mem* elements are designed for cross flow operation, but can also be operated semi dead-end. The lab elements are available in the so-called monotube version 010x250mm with one 06mm channel. Pore sizes: 3 micron, 1 ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Liquiline CM444 is a digital multiparameter transmitter for process monitoring and controlling in any application. Modules can be added at any time to fit your process. The 4-channel controller saves you time and money by offering seamless system integration, simple operation and a reduced need for spare part stock. LiquilineCM444 provides you with all the benefits of a best-in-class transmitter ...
-
Manufactured by Water Services Inc.based in USA
2 HP/ 1.5KW, 110-240Volts, Phase: 1, 3" Discharge, 16' Cord Length, Manual Operation, Solid Pass: ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Ovivo rotary distributor filters screened and settled wastewater through a bed of rock or plastic to reduce the biological oxygen demand (BOD) to acceptable levels. Microorganisms attach to the media and consume the waste that contacts the surface as the liquid trickles through the media. Basic applications for rotary distributors include low and high rate trickling filter processes, but can ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Only True Self Testing Probe. The MCG 1090 Level Alarm Probe brings state of the art technology to overfill protection. The competitors systems typically only check the wiring and probe electronics. The MCG 1090 includes a solenoid to physically move the displacer as an actual level would. In keeping with the L&J tradition, the MCG 1090 has gone a step further than the competition in ...
-
Manufactured by Verantis Environmental Solutions Groupbased in USA
Verantis Centrifugal FRP fans blow air perpendicular to the intake, providing greater air pressure per volume for optimum performance with minimal interruption. Our centrifugal fans are designed for long, trouble-free service, ensuring incredible value, and they are available in a wide range of models including an in-line model, to meet your air handling requirements needs. Verantis pretests ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Unit equipped with all elements needed for its functioning. Working by dead-end filtration with a special backwash mode to avoid the use of a backwash tank. Frontal filtration is used for certain types of water. Exclusive Aquasource Process. The compactness of Ultrasource ® allows for easy and immediate integration in various environments. Commissioning in 1 ...
-
Distributed by Research Instruments Pte Ltd.based in SINGAPORE
Pall Life Science (formerly Pall Gelman Laboratory) applies the science of membrane manufacturing to produce filtration, separation, detection, and analysis products that deliver reliable performance while expediting and simplifying your processes. Products are available for a multitude of applications including molecular biology, cell and tissue culture, and analytical sample preparation, ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Colorimetric system for wastewater monitoring and optimization of process control. Liquiline System CA80PH offers online orthophosphate measurement for precise dosing of precipitants in wastewater treatment. As all Liquiline System analyzers, it enables plug & play of up to 4 Memosens sensors - minimizing the installation effort. Automatic calibration and cleaning and the low consumption of ...
-
Manufactured by Schroeder Valves GmbH & Co. KGbased in GERMANY
The minimum flow valves from our SIP series is the ideal valve for applications with pressures between 140 and 250 bar in systems with continuous operation, even at load points below the pump minimum quantity. The SIP controls the bypass by means of a multi-stage piston, which enables a defined multi-stage pressure reduction for all flow rates and also guarantees cavitation-free operation at all ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The 94390 Arrester Bank EZ-Out has been designed to assist plant personnel for the inspection and removal of spiral wound Flame, Deflagration & Detonation Arrester Tube Banks. The 94390 is designed for use with arresters installed in "In-Line" process piping for the Wastewater, Oil & Gas, Chemical, Petrochemical, and Pharmaceutical ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For continuous generation of ultra pure deionised water (> 5 M?/cm) für hydrogen generators. For removal of organics, phosphates, chlorine and all ionisable constituents from tap ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you