AMS Water And Wastewater Equipment In North Carolina
-
PremiumManufactured by AMS, Inc.based in USA
AMS groundwater samplers are often used for the initial site investigation because of the ability to rapidly sample a large number of locations, and to collect representative samples of all contaminants. Small diameter groundwater monitoring wells are installed by direct push. Our kits provide everything needed for quick and successful ...
-
PremiumManufactured by AMS, Inc.based in USA
Spring-loaded! The AMS all stainless steel Ekman dredge is spring-loaded with a messenger that travels down the rope and trips the dredge to ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily and economically sample soil gas vapors at shallow depths for preliminary testing. The AMS "original" gas vapor probe can take vapor samples in soils to depths of 12' depending on soil conditions. This kit is an excellent choice for shallow gas vapor sampling in soft soil. The kit includes a base section with a probe tip and soil gas access holes above. An included liner rod with tip is ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2" X 12" Multi-Stage Soil Core Sampler Complete collects an approximate 2" diameter undisturbed core sample down to 48" deep when optional extension sections are attached. This sampler has an outside diameter of 2-3/8" and accepts a 2" liner. The cap, sampler base, extension section, and auger tip are constructed of 300 series stainless steel (SST). The core tip is constructed of 400 series ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2" X 12" Multi-Stage Soil Core Sampler Complete collects an approximate 2" diameter undisturbed core sample down to 48" deep when optional extension sections are attached. This sampler has an outside diameter of 2-3/8" and accepts a 2" liner. The cap, sampler base, extension section, and auger tip are constructed of 300 series stainless steel (SST). The core tip is constructed of 400 series ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Multi-Stage Soil Core Sampler Complete, Hex Quick Pin. The 2" X 12" Multi-Stage Soil Core Sampler Complete collects an approximate 2" diameter undisturbed core sample down to 48" deep when optional extension sections are attached. This sampler has an outside diameter of 2-3/8" and accepts a 2" liner. The cap, sampler base, extension section, and auger tip are constructed of 300 series ...
-
PremiumManufactured by AMS, Inc.based in USA
The Deluxe AMS Fiberglass Auger Kit provides some protection against possible electric shock when working in areas where buried electric cables may be present. This kit features the trusted AMS Signature Series thread pattern, which takes 2-1/2 revolutions to connect & disconnect. The two-piece 36-inch Tile Probe (with rounded safety tip) has a detachable plastic handle & zinc plated ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily sample most types of bottom surfaces. Constructed from stainless steel and powder-coated carbon steel for corrosion resistance. The top of the sampling chamber is screened to allow water flow during deployment and reduce the frontal shock wave that may displace sediment as the dredge contacts the sample surface. A two-way spring-loaded mechanism activates on contact with the bottom, no ...
-
PremiumManufactured by AMS, Inc.based in USA
Professional Series Multi-Stage Sediment/Sludge Sampler Kit! This sampling kit provides all of the components needed to collect sludge and sediment samples 3” in diameter & up to 24” in length. The 12" long (female/female threaded) base section and (1) extra 12” (male/female threaded) body section allows you to assemble a sampler that is 24” in length. This kit was ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Gas Powered Core Sampling Kit with gasoline powered Gas Powered REDI Boss Hammer is ideal for obtaining core samples to a depth of 8ft. (2.4m). The complete set contains: Gas Powered REDI Boss Hammer, (1) 4ft. Deluxe AMS Carrying Case, (1) 3ft. Deluxe AMS Carrying Case, GP Slotted Sampler Tube 4ft., (2) GP Upper Extensions 2ft., (2) GP Lower Extensions 2ft., GP Drive Head Adapter, (2) ...
-
PremiumManufactured by AMS, Inc.based in USA
Product Interface and Water Level Meters ; AMS Water Level Meters provide reliable and accurate measurements of groundwater levels. AMS Interface Meters provide measurements of both floating and sinking hydrocarbons. They are available with Polyethylene-coated steel tape that is marked with either standard/English or metric unit increments. Water level readings are taken at the top of the casing ...
-
PremiumManufactured by AMS, Inc.based in USA
Sample for volatile organic and inorganic compounds from beneath floor slabs. Sub-slab sampling and routine monitoring has become an integral part of vapor intrusion investigations. The AMS Sub-Slab Gas Vapor Probe Kit provides a semi-permanent probe, designed to allow repeated sampling over time in order to assess the potential of contaminated vapor intrusion from beneath buildings and offers an ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily collect sludge samples from the bottom of petroleum tanks with this unique & user friendly sampling kit. Based on the popular design of the ‘AMS Multi-Stage Sediment Sampling Kit’, the components in this kit are similar, only they are made from lightweight aluminum. This proves to be crucial, as often times tanks can be 50ft.+ in height; therefore keeping your sampler and ...
-
PremiumManufactured by AMS, Inc.based in USA
Ideal for locating buried pipes, underground tanks or utility lines. AMS tile probes are available in two types of material: 1) high carbon stress relieved 3/8" steel rod or 2) 5/8" fiberglass. The steel tile probes are available as a one-piece or two-piece unit with a 10" comfortably gripped cross handle (2-piece crosshandle is detachable), and an oversized ball tip for sensitivity and easy ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS PowerProbe 9110-LAP is a portable direct push rig, designed for use in confined spaces or buildings where a vehicle-mounted probe cannot go. This model can be driven off any standard AMS PowerProbeª with an auxiliary hydraulic hook-up kit, or the optional AMS portable hydraulic power unit. The 9110-LAP comes standard with a 90 ft-lb hydraulic ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS 3500 is the smallest of the AMS well management systems. It was designed for users with a limited number of wells to monitor. This capable unit is available with manual or hydraulic systems. The automated, hydraulic-driven boom with double-spool system will handle sampling jobs up to 300 ft deep. The SK-3500 is built on a self-contained skid that can easily be slid into or out of a ...
-
PremiumManufactured by AMS, Inc.based in USA
Install as permanent sample point, or leave in ground as a disposable point. AMS dedicated gas vapor tips are used for detecting hydrocarbon spills, underground storage tank and pipe leaks, landfill contamination and hazardous waste sites. Soil gas monitoring with the AMS dedicated gas vapor tip is easily accomplished using an available AMS gas vapor probe ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS infiltration rings are a simple and relatively inexpensive method for monitoring infiltration rates. They can also be used to study liquid waste disposal, leaching and drainage efficiencies. The rings are centered by the cross handle – which is welded in place at the top of the unit. The rings are inserted into the turf by pushing and twisting on this cross handle. An optional dead blow ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Interface Meters provide measurements of both floating and sinking hydrocarbons (non-aqueous product layers). These battery powered, portable reel-mounted instruments uses include measuring oil and water levels in monitoring wells and detecting tank leakage. When the probe of the interface meter is lowered down a well and contacts the product layer, a solid tone and green light alarm is ...
-
PremiumManufactured by AMS, Inc.based in USA
Stops caving sediment! Use this manually-driven sampler for discrete interval sediment sampling in rivers, lakes, wetlands, and estuaries. To obtain a sample, the sampler is lowered to the surface as a dual tube or driven down to the desired depth where sampling is to begin below the surface. Upon reaching the desired sampling depth, the inner rods attached to the internal drive tip are retracted ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you