DESMI Water And Wastewater Equipment In Virginia
-
Manufactured by DESMI A/Sbased in DENMARK
The DESMI Modular H centrifugal pump is the result of further development of the well-known DESMI Modular S pump series. The aim has been to produce a series of non self-priming horizontal pumps, based on the same components as the S series. The H pump series has been computer designed in accordance with the latest principles, and the result is a modern, compact pump of ideal dimensions for ...
-
Manufactured by DESMI A/Sbased in DENMARK
The system combines proven DESMI oil spill containment boom with the Boom Guard Monitoring Buoy, an oil pollution monitoring device used to monitor for the presence of oil pollution within the boom containment area. If oil pollution is detected, the buoy transmits an alert via Iridium satellite in real time. The buoy also monitors location and heading and should the SMART BOOM drift, the buoy ...
-
Manufactured by DESMI A/Sbased in DENMARK
DESMI has an extensive product range of mobile and stationary diesel-driven pump units. These pump units are made to comply with the demands of the marine industry as regards materials, design, and ease of handling. All DESMI’s mobile pumps are in compliance with the Danish Maritime Authority’s requirements for portable emergency fire pumps in fishing and cargo vessels together with ...
-
Manufactured by DESMI A/Sbased in DENMARK
The ALLIGATOR is a versatile skimmer that has the ability to recover a wide range of oils not normally associated with oleophilic skimmers - from light to very viscous oil. The brush belt pulls the oil into the unit where it is elevated and recovered at the back of the skimmer with a unique double comb ...
-
Manufactured by DESMI A/Sbased in DENMARK
High-efficiency In-line centrifugal pumps. The ESL Centrifugal Pump is designed for high efficiency, low NPSH and is installation and service friendly. The ESL is widely used within different applications and markets. ...
-
Manufactured by DESMI A/Sbased in DENMARK
Pump capacity: 100 to 125 m³/h / 440 to 550 US gpm. Discharge pressure: 10 bar / 145 psi max.. Dimensions: 545 x 365 x 735 mm / 21.5' x 14.5' x 29'. Minimum manhole diameter: 600 mm / 24'. Pump inlet: 250 mm / 10'. Discharge connections: 4', 5' or 6' Camlock, flange or other on request. Standard materials: Aluminium casing, high tensile plate wheel, SS Ni-Resist screw. Hydraulic requirement: ...
-
Manufactured by DESMI A/Sbased in DENMARK
A new generation of dirty water vacuum pumps, based on the principle of the liquid ring system. This compact pump combines all performances of diaphragm, piston and centrifugal pumps and will pump continuously, by means of the specially developed rotor, on liquids, air or gasses in any mixture. ...
-
Manufactured by DESMI A/Sbased in DENMARK
RO-KITE - The new aquatic device designed to replace the functions of a second boom sweep vessel The DESMI RO-KITE is a floating water kite based on a combination of trawl door and ramair parachute principles. When launched, the ROKITE, powered by the current and in combination with the RO-KITE’s unique design makes it swing out and away from the ship towing the outer end of the sweep ...
-
Manufactured by DESMI A/Sbased in DENMARK
The series of DESMI MODULAR S pumps represents one of the most distinctive developments in self-priming pumps. Based on many years of experience in the production of self-priming pumps we supply a pump series that meets the future demands for economical and reliable pumps. ...
-
Manufactured by DESMI A/Sbased in DENMARK
Transport and treatment of waste water are important tasks in a modern society. The waste water must be transported from residential areas and industrial companies to the waste water treatment plant, that need to optimise the way it treats wastewater with the least possible impact on people and nature. Transportation of waste water is full of challenges. Energy optimisation, design, installation ...
-
Manufactured by DESMI A/Sbased in DENMARK
RO-MAR fenders and buoys are the result of years of develpoment and research in co-operation with major marine and offshore operators. The pneumatic RO-MAR fenders and buoys are ideal for on-board storage. The RO-MAR can be used as a temporary buoy, fender or lift/support unit. The RO-MAR pneumatic fender is especially handy for large yachts where standard boat fenders are just not up to the ...
-
Manufactured by DESMI A/Sbased in DENMARK
DESMI has high quality and well established utility/district energy pumps on the market, with focus on high energy efficiency and long life ...
-
Manufactured by DESMI A/Sbased in DENMARK
The NSL range of pumps represents high efficiency, low NPSH values, easy to installation and low maintenance. The NSL series is widely used within different applications and markets. ...
-
Manufactured by DESMI A/Sbased in DENMARK
The DESMI Fixed Fire-Fighting system is developed to suppress or extinguish fire at an early stage before releasing the total flooding system as required by SOLAS Ch.II-2/Reg.10.5.6.1&2 for ships constructed on and after 1st July 2002. The FineFogTM water mist has a highly suffocating and cooling effect and with the DESMI FineFogTM you can therefore protect the inflammable objects in ...
-
Manufactured by DESMI A/Sbased in DENMARK
The RO-SKIM is positioned at the optimum location for oil recovery. The RO-SKIM is a special section of RO-BOOM that has been fitted with a weir and DESMI DOP 250 or DOP 160 pump. The RO-SKIM is available in five sizes to mate with RO-BOOM 1000, 1300, 1500, 1800 and 2000. The weir is ideally placed for collection of the oil that is building up against the face of the RO-BOOM. One or two RO-SKIM ...
-
Manufactured by DESMI A/Sbased in DENMARK
The HELIX represents a significant advancement in skimmer technology. This circular brush skimmer is the result of several years of research and ...
-
Manufactured by DESMI A/Sbased in DENMARK
Close coupled self-priming centrifugal pump is a totally renewed design based on the original “K&R” models. However fully replaceable with former types, in dimensions as well as capacities. The compact pumps are simple in design, consist of few parts, and will thus reduce your costs. This of course also means easy maintenance. On basis of 50 years of experience in the production ...
-
Manufactured by DESMI A/Sbased in DENMARK
The design of the Polar Bear Ice skimmer has benefited from a continuing development program over nearly 3 years. The resulting system is a very versatile, reliable, powerful and seaworthy oil skimming system that can be used in ice-infested waters. The Polar Bear is a powerful offshore ice skimmer which because of its compact hexagonal design ensures optimal contact with the surface surrounding ...
-
Manufactured by DESMI A/Sbased in DENMARK
The DESMI SA self-priming centrifugal pump.The diffuser principle in the self-priming DESMI SA centrifugal pump means that the priming capacity is not dependent on valves or other mechanical elements since it is the liquid flow which carries the air.The SA pump used within different applications and markets. ...
-
Manufactured by DESMI A/Sbased in DENMARK
DESMI offers a diverse range of inshore and coastal oil containment booms to meet your operational needs, whether that is fast response, ease of deployment or longevity. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you