Applications in North Dakota
-
Premium
Water Testing for Automatic Rinse Tank Controls
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have ...
By Myron L Company Distributor in , NORTH DAKOTA (USA).
-
Premium
Gas detection for building ventilation control
By Acme Engineering Prod. Ltd. Distributor in West Fargo, NORTH DAKOTA (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Environmental Industry
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation's waterways. Today, in many ...
By Myron L Company Distributor in , NORTH DAKOTA (USA).
-
Premium
Pool Water Testing / Spa Water Testing
Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should ...
By Myron L Company Distributor in , NORTH DAKOTA (USA).
-
Premium
Water Testing for Textile Manufacturing
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
By Myron L Company Distributor in , NORTH DAKOTA (USA).
-
Premium
Cleaning process for water intake
By Acme Engineering Prod. Ltd. Distributor in West Fargo, NORTH DAKOTA (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Circuit Board Cleanliness Testing Industry
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple 'on line' test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L ...
By Myron L Company Distributor in , NORTH DAKOTA (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Fountain Solutions
Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately ...
By Myron L Company Distributor in , NORTH DAKOTA (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Deionized Water Testing Industry
Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car ...
By Myron L Company Distributor in , NORTH DAKOTA (USA).
-
Premium
Oxidation Reduction Potential (ORP)/Redox
Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the ...
By Myron L Company Distributor in , NORTH DAKOTA (USA).
-
Premium
Effluent cleaning for wastewaters
By Acme Engineering Prod. Ltd. Distributor in West Fargo, NORTH DAKOTA (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Boilers and Cooling Towers
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
By Myron L Company Distributor in , NORTH DAKOTA (USA).
-
Premium
Water and Wastewater Applications for Scraper Strainers Line
Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because ...
By Acme Engineering Prod. Ltd. Distributor in West Fargo, NORTH DAKOTA (USA).
-
Premium
Reverse Osmosis Water Testing
Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important process ...
By Myron L Company Distributor in , NORTH DAKOTA (USA).
-
Premium
Industrial Applications for Acme Strainers
Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because ...
By Acme Engineering Prod. Ltd. Distributor in West Fargo, NORTH DAKOTA (USA).
-
Landscape pumping systems
Watertronics has been serving the Landscape irrigation market for three decades. We offer a variety of products customized to fit numerous Landscape applications including parks & recreation, cemeteries, schools, universities, strip malls, sports complexes, subdivisions, nurseries, and business parks to name a few. Watertronics pioneered the concept of a self-enclosed pumping system through our introduction of the WaterMax Series in approximately 1980, which has since been widely duplicated in the Landscape ...
By Lindsay Corporation Distributor in Oakes, NORTH DAKOTA (USA).
-
Agriculture pumping systems
In 2008, Watertronics became part of Lindsay Corporation, a Nebraska-based global manufacturer of agricultural irrigation products. Being a market leader in pump and control innovation, Watertronics was an excellent fit for Lindsay - matching water supply with water distribution… pumps with pivots. Watertronics products include not only pump stations, but advanced controls technology for high efficiency pumping that produces significant energy savings and labor savings. Today the Ag market is benefiting ...
By Lindsay Corporation Distributor in Oakes, NORTH DAKOTA (USA).
-
Water treatment for muni and industrial
With our network of Municipal manufacturer's representatives, we provide integrated water treatment, pumping and water management solutions for municipal and industrial applications. We are systems integrators who offer the expertise and flexibility to provide treatment, pumping, controls, monitoring, service and support. We provide an unbiased evaluation of the best capital and operating cost solution for your municipal and industrial treatment, pumping and water management applications. Through our vast network ...
By Lindsay Corporation Distributor in Oakes, NORTH DAKOTA (USA).
-
Water treatment and mixing equipment for stormwater retention basins Industry
Stormwater retention ponds or basins (also known as wet ponds) add crucial capacity to the overall stormwater management system and can also serve as important community amenities. Maximizing water quality in these basins becomes even more critical as Integrated Water Management look to these stormwater resources as a way to supplement water supplies for potable & reuse irrigation applications. Any community benefits can be quickly overshadowed if the retention basin is allowed to become stagnate, stinky, and ...
By Ixom Watercare based in Dickinson, NORTH DAKOTA (USA).
-
Potable Water Storage Tank Mixing
Inadequate potable tank mixing is a persistent problem for many municipal water systems across the United States, Canada, & the world. Simply put, tanks need consistent, effective, and reliable mixing. Test sample inconsistencies, thermal stratification, inconsistent water age, low disinfectant, and other DBP issues can all be mitigated with complete top to bottom tank ...
By Ixom Watercare based in Dickinson, NORTH DAKOTA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you