River Monitoring Applications

10 Results found
Only show results in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: River Monitoring ×

Environmental Water Analysis

by CleanGrow     based in Blackpool, IRELAND

Now for the first time you can measure ion levels in drinking / tap water, rivers and lakes using one probe and one set of calibration solutions. We have probes specially tailored for environmental testing. Our Environmental probes measure Chloride, Ammonium and Nitrogen or we have a total nitrogen probe measuring Ammonium and Nitrogen. Each probe can be calibrated in our unique calibration solutions allowing you to calibrate all sensors simultaneously and take measurements in drinking or river water. Probes are also available in our standard four or six ion combinations and can be custom packaged upon request.

Monitoring Sewage Flow

by Solid Applied Technologies Ltd. (SolidAT)     based in Ashkelon, ISRAEL

Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

Environment monitoring

by Atookoo inc.     based in Sherbrooke, QUEBEC (CANADA)

Environmental monitoring is a natural application for our solar units. Using our satellite modems, these systems can monitor vital remote areas, keep an eye on rivers or used as a remote weather station, giving us the ability to preserve our wilds while having minimal impact to achieve that goal. Since they are self-contained, they can be relocated quickly with ease, keeping costs down.

Water Treatment Solutions for Turbidity Removal

by Adedge Water Technologies, LLC     based in Buford, GEORGIA (US) (USA)

Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change causing a turnover of those levels, bringing sediment, plants, and algae to the top.

Fast Water, Rivers & Lakes

by DESMI A/S     based in Noerresundby, DENMARK

Oil spill response operations are notably difficult in rivers with strong current. In addition, when considering response times for river spills in relation to the mobilisation time required for conventional land- or vessel-based boom systems, a timely response is often a logistic impossibility especially in the more remote regions. Therefore, equipment must be readily at hand near the sites of operation and pre-rigged lines, cables and mooring areas are a must. Selection of a good location to deploy the oil containment system is dependent upon prior planning and understanding of the currents. Drift studies, river run off histories, tidal current tables and charts, plus computer modeling are all useful tools to understand the flow patterns and to develop recovery strategies. Reading the currents and flow patterns require practice and understanding of the hydrodynamics involved.

River Level Monitoring -

by Solid Applied Technologies Ltd. (SolidAT)     based in Ashkelon, ISRAEL

SUMMARY Fielded water level measurement stations, based on GaugerGSM sensor, report real time stream levels and flow. Stations are located across a stream-rich region of the upper Galilee feeding the Jordan river in the northern part of Israel. The region is a popular tourist destination due to its biblical origins, rich flora and fauna. Field data is available over the Internet to authorized engineers, site supervisors and Government officials. remote monitoring station - close up THE NEED The water basin in the Upper Galilee maintains a delicate balance between recharges, net precipitation, domestic and irrigation consumption, and water tourism (canoeing). Local and state officials are tasked to study the tradeoffs, manage risks and take actions to keep the balance. Monitoring stations are essential for data collection. remote monitoring station - overall

Continuous Monitoring of Surface Water

by SORBISENSE     based in Tjele, DENMARK

The Sorbisense method is especially suitable for measurements in dynamic environments. For example, in rivers, streams and lakes.

The method is innovative and allows you to implement continuous and cost effective measurements in both urban and in rural areas. For example, measuring the leaching of nutrients from the cultivation of wetlands and measuring water quality in rainwater and sewage.

Groundwater Monitoring for Water Resource Management

by HERON Instruments Inc.     based in Dundas, ONTARIO (CANADA)

One of the greatest problems facing the planet is the management, conservation and equitable distribution of fresh water supplies. The fresh water sources may be lakes, rivers or ground water aquifers, most of which are now under stress.

Surface Water Quality Testing for the Environmental Monitoring Industry

by AQUAREAD Limited     based in Broadstairs, UNITED KINGDOM

We have a wide range of water testing equipment that is used to record trends across different water quality parameters in water bodies such as streams, lakes and rivers, as well as in seawater. Understanding these trends means that when there is a change it could be an early warning that there is a pollutant in the water or there has been a change in the aquatic ecosystem. Early detection is necessary to put mitigating measures in place.

Our parameters are wide ranging, although the most commonly measured in surface water testing and monitoring are dissolved oxygen, pH, electrical conductivity and temperature, which are standard on most Aquaprobes. If you require specific parameters to be tested, there is the option to add additional parameters.

Monitor Dredging Slurry Flow

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Thousands of dredges are operated to maintain navigation channels in our rivers, lakes and harbours and to mine sand and gravel for the construction industry. Managing and optimizing production from a dredge requires continuous monitoring of pipeline pressure, vacuum and slurry velocity. The operating conditions are extremely harsh and any sensing components in contact with the abrasive slurry can be damaged. But dredge operators need accurate real-time flow information to properly manage production so equipment manufacturers have been seeking innovative monitoring solutions...

Need help finding the right suppliers?

Let the XPRTs do the work for you