Only show results in Connecticut? Ok

screw press (Screw Presses) equipment

  • Premium

    Mellegard & Naij - Model SP - Screw Press

    Screw Press SP is used for compaction och conveying of screenings and wet waste.

    By Hydria Water AB based in Borås, SWEDEN. from Mellegard & Naij - Wet Waste Screenings Handling Product line

  • Premium

    Mellegard & Naij - Model QS - Screw Disc Press

    Disc Press QS is a screw press for thickening and dewatering of sludge and wet waste.

    By Hydria Water AB based in Borås, SWEDEN. from Mellegard & Naij - Sludge Dewatering Product line

  • Premium

    Komline-Sanderson - Multi~Wave Screw Press

    Komline-Sanderson’s Multi~Wave Screw Press is designed to obtain high volume reduction and high hydraulic throughput at a low polymer dose. The design provides for low maintenance costs and long operational life in the highly corrosive atmosphere of sludge treatment. As a thickener and dewatering device combined in one unit, polymer ...

    By Komline-Sanderson based in Peapack, NEW JERSEY (USA).

  • Premium

    WesTech - CleanWash™ Screw Wash Press and Counter Pressure Screw (SWP/CPS)

    Unlike other screw wash presses in which the design of the discharge pipe creates the back pressure necessary to dewater screenings, WesTech's CleanWash™ Screw Wash Press and Counter Pressure Screw regulates exactly the right amount of back pressure to meet the highly variable influent. The positive conveyance of the screenings after each ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Headworks Screening Product line

  • AKUPRESS - Model LX - screw presses

    Whereas the AKUPRESS AX, BX and CX screw press types are characterized by high torques and thus high dry contents for structured materials, AKUPRESS LX has been specifically been designed for dewatering finely structured materials. The ,X' identifier stands for the special patented throttling system used on all presses of this line.

    By Bellmer GmbH based in Düren, GERMANY. from Paper Technology Product line

  • Tecnofer - Screw-Press

    The machine is installed at the end of the film washing lines for drying the material. The drying system is based on the mechanical squeezing, made by a worm working inside holed cylinders. The machine discharging final part is fitted with hydraulic locks that slow down the feeding of the product. In this way the material becomes compacted, ...

    By Tecnofer based in Ceneselli, ITALY. from Machines Product line

  • Screw Press

    This is the unique screw type device that not only can press also smash material in the world. Objects:MSW、Food waste、plastic film etc. Capacity: 0.5 ~ 2t/h (plastic);3 ~ 15t/h (MSW. Application: MSW, plastic film etc.

    By Shanghai Shenjia Sanwa Co., Ltd. based in Shanghai, CHINA. from Dewatering and Drying Series Product line

  • Model DSP - Screw Press

    BDP developed this screw press specifically for Biosolids dewatering to provide high capacity, excellent solids capture, in a fully enclosed system with automated simple operation.

    By BDP Industries based in Greenwich, NEW YORK (USA). from Dewatering Product line

  • Hansek - Screw Press

    The Hansek screw press can be used to drain a wide range of materials. The material to be drained is placed into the machine through the inlet. In the task area, splash water brought along can drain through a sieve in the housing. The material is transported to the machine’s drainage area by the screw shaft. Here, the material is compressed ...

    By Hansek Maschinenbau GmbH based in Billerbeck, GERMANY.

  • AKUPRESS - Model L - Screw Presses

    The AKUPRESS AL screw press line was designed to allow for a simple and low-cost dewatering/separation process.

    By Bellmer GmbH based in Düren, GERMANY. from Paper Technology Product line

  • AKUPRESS - Model AL - Screw Presses

    The AKUPRESS AL screw press line was designed to allow for a simple and low-cost dewatering/separation process.

    By Bellmer GmbH based in Düren, GERMANY. from Separation Technology Product line

  • Kapotek - Screw Press

    Screw Press is designed for handling and compacting a variety of industrial rejects and fibrous waste. Screw Press is also called as a compactor. The most common use is in agriculture removing liquid from manure.

    By Kapotek Ltd based in Järvenpää, FINLAND. from Products for Every Process Product line

  • Screw Press

    Press Technology is a developer and manufacturer of cutting edge screw presses for pulp and paper, municipal waste and other industrial applications. A leader in new screw press design, Press Technology specializes in developing and manufacturing equipment tailored to meet customer requirements and demands.

    By Press Technology & Mfg., Inc. based in Springfield, OHIO (USA).

  • Model AGSP Screw Press - Screw Press

    The screw press can be used in an extremely of municipal waste (MSW) dewatering. As shown to the right, the screw press is a very simple, slow moving mechanical devise. Dewatering is continuous and is accomplished by gravity drainage at the inlet end of the screw and then by reducing the volume as the material being dewatered is conveyed from the ...

    By Guangzhou Lida Engineering Machinery Co, Ltd. based in Huadu, CHINA. from Screw Press Product line

  • solidXpress - Screw-Press

    For dewatering surplus and digested sludge to 18-28% DS Our revolutionary solidXpress combines the high dewatering efficiency of a centrifuge with the low power consumption of a screw press. Unlike conventional screw presses, it has a high slenderness ratio and an auto-adaptive controller.

    By Sülzle Klein GmbH based in Niederfischbach, GERMANY.

  • Model WAP - Screw Presses

    The screw press WAP is designated for washing of soluble organic substances (feces) from screenings, with ability to dewatering, pressing and transport soluble organic substances in to a container. Screenings are pressed by rotation of a screw in an inlet hopper meanwhile screenings concentrated in a discharge pipeline create counter pressure. ...

  • Keiper - Screw Presses

    Screw presses made of stainless steel to dehydrate various agents.

    By Ludwig Keiper GmbH & Co. KG based in Obermoschel, GERMANY. from Screw Conveyors Product line

  • Vincent - Model CP & VP Series - Screw Presses

    The CP/VP screw press handles materials often considered unpressable, accepts variable feed rates and has low operating and maintenance costs. These presses are most commonly used in, but not limited to, the following applications.

    By Vincent Corporation based in Tampa, FLORIDA (USA).

  • AKUPRESS - Model AM/AMX - Screw Presses

    The AKUPRESS AM/AMX screw press line has been designed for the dewatering/separation of matters having a high inlet pressure and requiring a minor distance between spiral/screen basket.

    By Bellmer GmbH based in Düren, GERMANY. from Separation Technology Product line

  • Biotec - Screw Press

    Screw press produced by Biotec Sistemi is a compacting equipment, engineered for the reduction of volume and dewatering of waste such as: paper, plastic, polylaminates, polystyrene foam, bottles, aluminum cans and other metals, textile waste, etc. Main sections of equipment are: a dosing hopper, a sieve with spiral screw, hydraulic clamp and a ...

    By Biotec Sistemi S. r. l. based in Genova, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you