We couldn't find any screw press equipment suppliers or service providers located in Connecticut
Here is a list of equipment results with suppliers serving Connecticut
Screw Press (Screw Presses) Equipment Available In Connecticut
-
Manufactured by Bellmer GmbHbased in GERMANY
In the field of reject handling, we offer two different screw press lines: AKUPRESS AP/AS for high dry content and AKUPRESS AX for the maximum dry content in the market. Here we build on the experiences gained from more than 700 AKUPRESS screw presses sold and delivered. All our screw presses ...
-
Manufactured by Teknofanghi S.r.l.based in ITALY
Our experience in sludge dewatering has allowed us to develop this new type of screw press. The SCRUPRESS® is composed by an inclined three-stages (draining, thickening, dewatering) wedge wire drum, with a special conical screw running inside and a pneumatic counter pressure come at the end. The Scrupress® is fully automatic and ...
-
Manufactured by Bellmer GmbHbased in GERMANY
For municipal sludge dewatering applications, we offer the AKUPRESS BX LL-Ls type screw press. Here we build on the experiences gained from more than 700 AKUPRESS units sold and delivered. This press for municipal use is a further development of the specialists for screw presses. In addition to the individual ...
-
Manufactured by BDP Industriesbased in USA
BDP developed this screw press specifically for Biosolids dewatering to provide high capacity, excellent solids capture, in a fully enclosed system with automated simple ...
-
Manufactured by Hydria Water ABbased in SWEDEN
Screw Press SP is used for compaction and conveying of screenings and wet ...
-
Manufactured by Stjernholm A/Sbased in DENMARK
Optimise sludge treatment with a screw press from Stjernholm. The past few years have seen an increased focus on disposal costs and energy consumption. In addition, the industry would like to minimise the consumption of polymers related to sludge ...
-
Manufactured by Doyen (China) Machinery Co., Ltd.based in CHINA
Screw press is a type of sludge dewatering machine press in which the ram is driven up and down by a screw. The screw shaft can be driven by a handle or a wheel. It works by using a coarse screw to convert the rotation of the handle or drive-wheel into a small downward movement of greater force. ...
-
Manufactured by Doppstadtbased in GERMANY
The Doppstadt Screw Press 205 is designed for solid-liquid separation of organic waste. During this process the bio-available fraction of the input material is concentrated in the liquid phase (filtrate). The filtrate is then used as a substrate to produce biogas using wet fermentation. According to the application the retentate can be ...
-
Manufactured by Sülzle Klein GmbHbased in GERMANY
For dewatering surplus and digested sludge to 18-28% DS. Our revolutionary solidXscrew combines the high dewatering efficiency of a centrifuge with the low power consumption of a screw press. Unlike conventional screw presses, it has a high slenderness ratio and an auto-adaptive ...
-
Manufactured by Purestream, Inc. and Purestream ES , LLCbased in USA
The In-Eko Screw Press is manufactured of 304 Stainless Steel and is a beneficial accessory to the Mechanical Bar Screen. Generally placed below the outfall of the head of the bar screen, the screw press will dewater and compact the screened material. The pressed screenings then travel out the chute into the ...
-
Manufactured by Lackeby Products ABbased in SWEDEN
Lackeby Screw press can be delivered as a combined washing and pressing unit. Material is washed during transport and dewatered in the unit’s perforated dewatering zone. A plug of dewatered material is formed at the outlet end due to the resistance created by three counterforce plates which is the key to reach the very high amount of ...
-
Manufactured by Bellmer GmbHbased in GERMANY
AKUPRESS AM/AMX is offered for the dewatering of digester output from dry digestion of biowaste and household waste after separation of coarse matters. Here the screw press AM/AMX is especially designed to reach the maximum dryness of pressed cake. In general, the pressure of the screw press is build-up by a ...
-
Manufactured by Bellmer GmbHbased in GERMANY
For paper industry sludges, we offer the screw press AKUPRESS BX. Here, the letter “X” of our AKUPRESS X line stands for a special patented control concept, which in combination with high torques is allowing to reach maximum dry contents. Here we build on the experiences gained from more than 700 AKUPRESS screw ...
-
Manufactured by Kumar Metal Industries Pvt. Ltdbased in INDIA
Salient Features: Sturdy construction. Flexible opening of main cage for easy maintenance. Low initial investment, easy to install, high yield at low operating cost, capable of extracting oil from all oilseeds. Convenient height of worm shaft for easy maintenance as the worm shaft can be withdrawn without disturbing the expeller drive. Reduced load on bearing with high quality ball and roller ...
-
Manufactured by Kumar Metal Industries Pvt. Ltdbased in INDIA
Salient Features: Sturdy construction. Flexible opening of main cage for easy maintenance. Low initial investment, easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds. Convenient height of worm shaft for easy maintenance as the worm shaft can be withdrawn without disturbing the expeller drive. Reduced load on bearing with high quality ball and ...
-
Manufactured by IEA Derflinger Gmbhbased in AUSTRIA
Three different types of machines with throughputs of up to 2,000 kg of dry matter per hour. Machine Type "Economy SP-EC": For sludge dewatering in the most diverse fields of application. Machine type "High Flow SP-HF": For sludge dewatering with the highest possible throughput. Machine Type "SP-HE High Efficiency": For sludge dewatering with significantly reduced polymer ...
-
Manufactured by Bellmer GmbHbased in GERMANY
We offer different product solutions for the wet digestion processes depending on the specific customer application. Where a phase separation of digester output from wet digestion shall be made, the AKUPRESS AL is used. The AKUPRESS AL screw press allows a simple and low-cost dewatering/separation process. The pressure of the screw ...
-
based in USA
The Trident Screw Press is a durable, robust and efficient piece of equipment, purpose built for making bedding material from dairy manure. The press features a screw with interrupted flighting, graduated pitch and resistor teeth. The flighting is notched and a 1/32 inch screw-screen clearance further promotes ...
-
Manufactured by Autofric ABbased in SWEDEN
Autofric ASP is a high-performance, energy-efficient screw press for dewatering sludge from, for example, municipal treatment plants with an incoming TS content of up to about 5%. Autofric ASP is built around a precision-manufactured stainless steel (304 or 316L) conical screw that rotates through multiple dewatering zones inside a ...
-
Manufactured by Kumar Metal Industries Pvt. Ltdbased in INDIA
Salient Features: X’ tra Yield. X’ tra Strong. X’ tra Reliable. X’ tra Economical. X outs the competition. Independent ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you