Applications available in Central African Republic
-
Premium
Mercury monitoring for mercury flux measurement
The Tekran 2537 has been used in numerous published studies to measure the deposition or evasion of mercury from natural or contaminated surfaces (i.e. flux measurements). It is anticipated that many mercury flux measurements will be needed in the future to assess the impact of climate change on mercury cycling in the environment. There are two basic ways to do mercury flux measurements. First, the dynamic flux chamber method utilizes a custom enclosure, with controlled air flow, to measure the inlet and outlet ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Metal separation and recovery for the composting industry
By Regulator-Cetrisa based in Gavà , SPAIN.
-
Premium
Process Flue Gas Monitoring for Combustion Optimization Application
Combustion in boilers, gas turbines, waste to energy, paper-mills, minerals, etc. | MIR 9000e Customer: Any industry having a stake in improved combustion technologies Material measured: Combustion flue gases Installation: At the boiler outlet Function: Reliable and accurate monitoring of O2 and CO for combustion control optimization ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Monitors, gas analyzers solutions for ISO 22716 solutions for cosmetics & personal care
Providing you with a complete spectrum of contamination monitoring solutions. The Cosmetics and Personal Care manufacturing industry is required to meet ISO 22716:2007 and worldwide GMP Standards for hygienic production and contamination control. This includes monitoring viable and non viable contamination that could impact the safety and quality of your products. Particle Measuring Systems brings in-depth knowledge of manufacturing processes and regulatory codes, such as ISO 22716, to Cosmetics and Personal Care ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Spray Drying & Encapsulation for researching
For different applications in research as well as for academic ...
By BUCHI based in Flawil, SWITZERLAND.
-
Premium
Continuous emissions monitoring solutions for fertilizer industry
Process control and emissions monitoring in a fertilizer plant is a challenge due to the high concentrations of HF. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
On-line gas, particulate analyzers, flow monitors, data acquisition for chemical industry
Our innovative measuring technology makes your plant even more competitive! The aim is to ensure quality during the manufacturing process, to improve the safety of the plant and to increase environmental protection. In the last years, we have been able to improve the processes with our technologies in a wide range of chemical applications with our experience. Our online operating systems are maintenance-free and operate reliably with almost all bulk solids. No matter whether abrasive, corrosive or otherwise ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Fully-automated gas chromatographs solutions for stack emissions monitoring sector
Synspec GCs can also be used as continuous emission monitoring systems (CEMS). In general, emissions from stacks are in the higher ranges of concentrations to be measured. Synspec equipment, which is usually geared towards very low detection levels, can be tuned to the concentration ranges that are emitted at your production plant. Depending on the composition of the emissions a sample treatment might be ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Direct mercury determination in foodstuff and mixed feed
Introduction: Direct (without any pre-treatment) atomic absorption or atomic fluorescence mercury determination in food and feed is difficult due to complex organic matrix. That is the reason why conventional AFS and AAS methods include sample digestion by acids and require compressed gases such as argon or oxygen. This makes analysis more complicated and costly and extends analysis time. Sample pre-treatment can also increase measurement errors. The use of a RA-915M/RA-915M+ mercury analyzer with a PYRO-915+ ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Channel Networks solutions for Seepage Water
Flow measurement in landfill leachate for sewage master ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Visual inspection solutions for the aviation industries
The role of quality assurance in aerospace manufacture is becoming increasingly important. These inspections require the use of borescopes allowing engineers to properly and thoroughly assess different units of an aircraft: Turbines and engines, combustion chambers, low/high pressure compressors, wings, foils, cells ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
ADVANCEES - Custom skid-mounted water purification equipments for aquaculture industry
We offer a complete line of solutions as follow: Desalination by reverse osmosis, brackish water reverse osmosis, multimedia filters, feed pump & feed pump skids, EDI, pre & post treatment options, membranes, softners, services & ...
By Advanced Equipment and Services, Inc based in Coral Springs, FLORIDA (USA).
-
Premium
Analytical Instruments for Wastewater Treatment
Respirometer based on gasometric method for wastewater analysis. In any biological wastewater treatment system, there is a need to define, assess and understand the plant’s performance with regard to the removal of certain contaminants and the response of bacterial activity to inhibitory compounds of interest. The execution of batch activity tests can be useful to study the biodegradability of a given wastewater stream, determine the stoichiometric and kinetic parameters involved in the conversion of a ...
By BPC Instruments AB based in Lund, SWEDEN.
-
Premium
Water Data Management Solution for Decision Support
Robust platforms with high data throughput and calculation capacity are required for the continued reliable operation of decision support systems. KISTERS solutions continue to be the preferred choice by organizations around the world needing these types of ...
By KISTERS based in Aachen, GERMANY.
-
Premium
Water treatment chemicals for the paper industry
The paper and board industry is in a geographic and structural transition. The industry is addressed by rising legal, economic and ecological demands which require a high level of innovation. As a leading global provider of unique solutions for industries that use water and energy intensively Kurita has a strong commitment to paper. We have a proven expertise in the supply and application of benchmarking products and technologies that support the paper industry in developing innovative products, optimizing ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Determination of cations in beverages
The method enables fast determination of inorganic cations (sodium, potassium, calcium, and magnesium) in the samples of juices, beer, wines, brandies, brandy alcohols, and raw materials by capillary electrophoresis. The method for evaluation of cations concentration is based on differential migration and separation of cations in electric field due to the difference in their electrophoretic mobility. Identification and quantitative determination of the analyzed cations is performed by indirect detection ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Air pollution, emission and process monitoring systems for laboratory
Our mercury monitors are designed for fully automatic determination of mercury traces in liquids and sample digests, an alternative solution to complex and time consuming manual techniques, also increasing the precision, efficiency and productivity of your lab. Some of our “ambient” monitors can also be used in laboratory, R&D applications or medical gas purity analysis and monitoring. For instance, number of O342e monitors are used worldwide by various rubber manufacturing companies in Ozone ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Water treatment solutions for power generation industry
Power generation companies face several challenges in the operation of power production facilities worldwide. These specific challenges include water scarcity, stricter regulations, economic development and rapid urbanization. Genesis Water Technologies provides specialized process optimization consulting services and innovative water treatment solutions tailored specifically to address the challenges faced by power companies including the effects of water scarcity and environmental compliance ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Gas analyzers and monitoring systems for fertilizer and nitric acid production sector
Nitric acid is manufactured from ammonia and is a key chemical in the manufacture of fertilizers. This is the main reason why nitric acid is produced in such large quantities. The production process of nitric acid produces nitrogen oxides (NOx), ammonia (NH3) and nitrous oxide N2O ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Industrial wastewater treatment for the graphic arts industry
Industrial wastewater treatment for the graphic arts ...
By C&G Depurazione Industriale S.r.l. based in Rignano S.Arno (Firenze), ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you