Only show results in Virginia? Ok

Screw Pumps equipment for Water and Wastewater

  • Premium

    ProMinent - Model Spectra - Eccentric Screw Pump

    Capacity range 2.4 – 12,000 l/h, 12 – 3 bar; The eccentric screw pump Spectra meters liquid polyelectrolytes in concentrated and dilute form. It can be used, for example, in waste water treatment or sludge dewatering.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY. from Chemical Transfer Pumps Product line

  • Premium

    Landustrie LANDY - Closed Screw Centrifugal Impeller Pumps

    Our LANDY closed screw impeller pumps are ideally suited for situations where power consumption is an important issue. This type of impeller is the new generation single channel impeller performing with high efficiency and good non-clogging performance.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Pumps Product line

  • Premium

    Landustrie LANDY - Archimedes Screw Pumps

    With a fully automated screw pump selection program the optimum screw pump can be choosen for any particular application.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Wastewater Technology Product line

  • Premium

    Landustrie - Screw Pumps

    With a fully automated screw pump selection program the optimum screw pump can be choosen for any particular application.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Pumps Product line

  • Imo Pump - Model Series 3G - Three Screw Pumps

    Series 3G pumps are provided for differential pressures to 250 PSIG (17.2 Bar) and flow rates to 55 GPM (208 L/M).  Mountings include foot or flange. Casing materials are either cast iron or steel. These three screw pumps are used for distillate fuel oil transfer and burner services, machinery lubrication and other industrial pumping ...

    By Imo Pump based in Monroe, NORTH CAROLINA (USA). from 3-Screw Pumps Product line

  • Model Series FT - Funnel Opening and Feeding Screw Pumps

    The model series FT is designed to promote products with a high amount of solid pieces, mash, yeast and filter cake without any problem. This model series of pumps is used as a high consistency pump with a built in funnel and as a liquid pump with a closed funnel and screw thread connection.

    By G.A. KIESEL GmbH based in Heilbronn, GERMANY. from Eccentric Screw Pumps Product line

  • KRAL - Model K Series - Three Screw Pumps

    KRAL K Series are three screw pumps for lubricating, non-abrasive and chemically inert fluids. They are used primarily in industrial applications, such as:

    By KRAL AG based in Lustenau, AUSTRIA. from KRAL Screw Pumps Product line

  • Leistritz - Model L3NX - Screw Pumps

    Leistritz screw pumps in the L3N range are three-spindle, single-volute, self-priming displacement pumps for the low-pressure range. They are used to transport non-abrasive lubricating fluids.

    By LEISTRITZ Pumpen GmbH based in Nürnberg, GERMANY. from Fluid Pumps Product line

  • Leistritz - Model L3MG - Screw Pumps

    Leistritz screw pumps in the L3M range are three-spindle, single-volute, self-priming displacement pumps for the medium-pressure range. They are used to transport non-abrasive lubricating fluids.

    By LEISTRITZ Pumpen GmbH based in Nürnberg, GERMANY. from Fluid Pumps Product line

  • Leistritz - Model L3NG - Screw Pumps

    Leistritz screw pumps in the L3N range are three-spindle, single-volute, self-priming displacement pumps for the low-pressure range. They are used to transport non-abrasive lubricating fluids.

    By LEISTRITZ Pumpen GmbH based in Nürnberg, GERMANY. from Fluid Pumps Product line

  • Model Series 413IC - Three Screw Pumps

    The 413IC pump is designed for vertical, deep well submerged operation for unloading barges, small tankers or tanks. The pump discharge is axial along the shaft. The design incorporates a third idler rotor which suppresses vibration and noise when pump is lightly cavitated.

    By Imo Pump based in Monroe, NORTH CAROLINA (USA). from 3-Screw Pumps Product line

  • Model Series USNP/4PIC - Three Screw Pumps

    Series USNP/4PIC are designed for direct drive via submerged two pole electric motors. They supply pressurized fluid to hydraulic elevator cylinders.

    By Imo Pump based in Monroe, NORTH CAROLINA (USA). from 3-Screw Pumps Product line

  • Model Series T324 - Three Screw Pumps

    The T324 series is a double suction design for a compact, medium flow, medium pressure pump. It is used extensively for crude oil processing and transport as well as for fuel oil services.

    By Imo Pump based in Monroe, NORTH CAROLINA (USA). from 3-Screw Pumps Product line

  • Model Tritec Series - Three Screw Pumps

    The Tritec series three screw pumps are designed for handling liquids with little or no lubricating properties, liquids that are corrosive or that contain abrasives. Examples include fresh or sea water, desalinated or deionized water, acid containing liquids, boiler feedwater, caustic solutions, emulsions, naphtha, waste oils and solvents, ...

    By Imo Pump based in Monroe, NORTH CAROLINA (USA). from 3-Screw Pumps Product line

  • ‘AB" Series Vertical Pumps

    ‘AB’ series single screw pumps are compact and sleek design vertical pump driven by flange mounted prime mover for empting barrels. Various options in joints such as double sealed bush/pin, open bush/pin, etc, are available. Delivery opening with flange. IDF or suitable connection are available. MS/SS/PVC material of construction with ...

    By Alpha Helical Pumps Private Limited based in Coimbatore, INDIA.

  • "MOD / MOH" Series Industrial Pumps

    ‘MOD’ series single screw pumps are of cast iron construction fitted with alloy steel / stainless steel rotating parts, while ‘MOH’ series have parts in contact with the fluid in stainless steel. Shaft sealing is ensured by hygienic quality gland packing or mechanical seal. An integral motor base eliminates the requirement ...

    By Alpha Helical Pumps Private Limited based in Coimbatore, INDIA.

  • GPE - Model P1001 Series - Screw Pump

    GPE Model P1001 series Screw Pump applied unique large module multi-head screw variant technology and sealing and Russian aerospace seal technology. By taking the advantage of both screw and centrifugal pump, our P1001 series screw pumps succeed in achieving excellent balance between head, capacity and noise control. Special alloy selection ...

    By Golden Promise Equipment (GPE) Inc. based in New York, NEW YORK (USA). from Pump Product line

  • Colfax - Three-Screw Pump

    The ALLWEILER and IMO three-screw pumps are rotary‚ self-priming positive displacement pumps. The pumping elements consist of three moving parts: the power rotor (main screw) and two symmetrically opposed idler rotors‚ all operating within close fitting housing bores. The incoming process fluid is conveyed by the rotating power rotor ...

    By Colfax Corporation based in Annapolis Junction, MARYLAND (USA).

  • Hydrochem - Model Type R - Screw Pumps

    Extremely compact and efficient, the Pump R has a special floating stator system technology. It's the perfect choice for average viscosity fluids and small flow rates (until 70 liters/min).

    By Hydrochem Srl based in Olgiate Olona, ITALY. from Screw Pumps Product line

  • CETAC - Model ASX-260 - Two-Rack Autosampler

    The compact and efficient design of the ASX-260 Two-Rack Autosampler preserves precious laboratory bench space. Ideal for low to medium volume sample applications, these autosamplers provide all of the fully automated features of a CETAC Autosampler in compact, easy to use s

    By Teledyne CETAC Technologies based in Omaha, NEBRASKA (USA). from Automation - Autosamplers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you