Only show results in Virginia? Ok

Scum Removal equipment for Water and Wastewater

  • Premium

    Polychem - Rotary Scum Skimming Troughs

    Rotary scum skimming troughs are the most economical method for removing all grease, scum, and other floating materials from the water surface in rectangular clarifiers. Scum troughs can rotate up to 75 degrees both forward and backward to accommodate changes in water level and collect surface material from either side of the trough. Slotted weirs ...

    By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA). from Rotary Scum Skimming Troughs Product line

  • Grease & Skimmings Removal: Scum Concentrator

    The Walker Process Equipment Scum Concentration System is a low-maintenance and easy-to-operate system that reduces the cost of processing skimmings removed by clarifiers. The system is specifically designed, engineered and constructed to reduce the volume from water, fats, oil, grease and other material from clarifier skimmings that would ...

    By Walker Process Equipment based in Aurora, ILLINOIS (USA).

  • Edgeng - Model FRP - Weirs and Scum Baffles

    EDGENG produces wide range of Weirs and Scum baffles for Water and Waste water treatment facilities. Weir Plates - Also referred as weir plates, finger weirs, and serpentine weirs. All our Weir products areclassified for water & waste water treatment facilities (NSF 61 Potable Water Applications). We supply Custom Molded Products, including ...

    By Edgeng based in White Plains, NEW YORK (USA).

  • FFI - Weirs & Scum Baffles

    FFI manufactures high quality matched-die-molded weirs and scum baffles per ANSI/AWWA F102-07. While this type of equipment is often seen as a commodity within the water and wastewater industries, there are some low quality products and inefficient designs on the market that can result in significant repair/replacement costs. Our weirs are ...

    By Fiberglass Fabricators, Inc. based in Smithfield, RHODE ISLAND (USA). from Weirs & Scum Baffles Product line

  • Model FRP - Non-Metallic Scum Skimmer Pipe Assembly

    HMAX Non-Metallic Scum Skimmer Pipes feature a tube of FRP with a gel coated interior for easy release of grease or solids, limiting build-up. Wall bearings are made of long lasting UHMW-PE material. Lightweight, easy to install this scum pipe will eliminate all corrosion and unsightly build-up, common with carbon steel and even stainless steel ...

    By Senqcia Maxco, Ltd. based in Kennesaw, GEORGIA (US) (USA). from Non-Metallic Scum Skimmer Pipe Assembly Product line

  • Telescoping Valves

    Slip Tubes: The valve slip tube shall be of seamless brass, stainless steel or PVC with a minimum wall thickness of 1/8' to prevent corrosion and to ensure proper operation at all times and arranged to slide inside of the sludge draw-off pipe as shown on the drawings. The valve shall have two V-notched weirs located 180 degrees apart.

    By Northcoast Valve & Gate, Inc. based in Mentor, OHIO (USA). from Telescoping Valves Product line

  • Amwell - Scum Skimmers

    Most of the problems with scum skimming are related to the operation and maintenance of the skimmer itself. It's common to find skimmers frozen in place and rusted out. We've even seen tomatoes and small trees growing out of an old, unused scum skimmers. Scum skimming is one of those truly neglected parts of most pollution control facilities.

    By AMWELL - A Division of McNish Corporation based in Aurora, ILLINOIS (USA).

  • Corrosion-Resistant Rotating Scum Skimmers

    The FRP Rotating Scum Skimmer is designed for rectangular basins. Typical sizes range from 6 ft. to 20 ft. in length, and 6 inches to 18 inches in diameter. Most are manually operated with a lever arm. A handwheel or electric operator are available options. Normal maintenance consists of routine plant washdown. Typical applications include: grease ...

    By Plasti-Fab, Inc. based in Tualatin, OREGON (USA). from Corrosion-Resistant Rotating Scum Skimmers Product line

  • Clarification/Sedimentation Equipments

    Circular & Rectangular ClarifierGeoMiller make clarifiers are highly effective equipments for solid-liquid separation in water and wastewater treatment application, which are manufactured in both circular and rectangular shape. Circular clarifier consist both type central and peripheral driven scraper mechanism included with adjustable V-notch, ...

    By Geo Miller & Co. Pvt. Ltd. based in New Delhi, INDIA.

  • Bottom Scrapers and Floating Scum Scrapers

    PROBIG is the specialist when it comes to developing high-quality specialist solutions that precisely meet the needs of the customer - from high-performance chains to chain scrapers for grit collection, floating scum scrapers with modular outlets, and much more.

    By Probig GmbH based in Vöcklamarkt, AUSTRIA.

  • Finnchain - Scum Removal System

    Finnchain’s scum removal system enables sludge removal from large areas using continuous, natural water flow. The most common applications of the FinnFlow system are preliminary and secondary sedimentation tanks in which scraper flights transfer the sludge close to the FinnFlow collector. The water flow transfers the surface scum to a ...

    By Finnchain Oy based in Rauma, FINLAND. from Scum Removal System Product line

  • BIOGEST AG - Model Type SWTW - Floating Scum Baffle System

    Floating scum baffle for solid retention of floating matters at stormwater overflows and CSO outlets. The vertical or radial floating baffles are suitable for strongly fluctuating water levels or high overflow levels as if moves with the water level up and down. The baffle will be produced in solid stainless steel.

    By BIOGEST AG based in Taunusstein, GERMANY. from Floating Scum Baffle System Product line

  • Come and Go for Pre Treatment System

    The unit has been designed to be installed over a rectangular concrete basin, to remove settled solids.

    By Intereco S.n.c. based in Scalenghe (TO), ITALY. from Come and Go for Pre Treatment System Product line

  • Saracco - Scum Concentrators

    EnviroCare's Saracco Scum Concentrator is designed to enhance wastewater treatment processes and reduce scum handling, disposal and hauling costs. Saracco Scum Concentrators assure better BOD5 and SS capture, more efficient digester utilization and less costly incinerator operation. Drier scum concentrations slash hauling costs, too. Water removed ...

    By Envirocare International, Inc. based in American Canyon, CALIFORNIA (USA).

  • Passavant - Scraper Technology for Circular Tanks

    The Passavant Scraper Technology for Circular Tanks  have been especially developed for automatically scraped, circular sedimentation tanks.

    By Aqseptence Group GmbH based in Aarbergen, GERMANY. from Scraper Technology for Circular Tanks Product line

  • Spiral Scum Skimmer

    Made ot anti-corrosive stainless material that assures long lifespan.Low noise operation.Less scum sedimentation results in higher removal rate.The spinning speed is lower as in one cycle it is capable in removing as many scum as a double cycle does.

    By Cheonbo Engineering Co.. Ltd. based in Hwasung-City, SOUTH KOREA.

  • Weir Plates and Scum Baffles

    Warminster Fiberglass manufactures weir plates, scum baffle plates, lap plates, cover plates and scum baffle support brackets of the highest quality. They are made of fiberglass reinforced polyester resin, matched-die molded to produce smooth, resin rich surfaces, free of voids, porosity, exposed glass, cracks and crazes. All edges are sealed in ...

    By Warminster Fiberglass Company based in Southampton, PENNSYLVANIA (USA).

  • Scum Baffles

    Scum baffles have one of the least glamorous jobs in the treatment plant.  They retain the solids floating on the water surface inside the clarifier and prevent their escaping over the weir plates.  Their job isn't glamorous, but it is essential to keeping TSS within range.  JC-Fabrications Scum Baffles come in standard 12' lengths ...

    By JC-Fabrications, LLC based in Boca Raton, FLORIDA (USA).

  • FRP Material

    JC-Fabrications supplies weirs and scum  baffles in Isophthalic Polyester (Type I) or Vinylester (Type II).  We can provide weirs and scum baffles that are NSF 61 compliant if your project calls for it.   

    By JC-Fabrications, LLC based in Boca Raton, FLORIDA (USA).

  • NEFCO - Fiberglass Weir and Scum Baffle Systems

    Weirs and scum baffles are the ever-present nuts and bolts of the treatment plant, where the versatility and durability of fiberglass makes it the material of choice for this equipment.

    By NEFCO, Inc. based in Palm Beach Gardens, FLORIDA (USA). from Fiberglass Weir and Scum Baffle Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you