Sea Bottom Equipment For Water And Wastewater Near Canada
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, standard set for sampling particles larger than 50 mu. Applicable in velocities till 2.5 ...
-
by ConeTecbased in CANADA
All ConeTec cones and data acquisition systems are built seismic ready. The addition of geophones in the CPTu body enables the collection of seismic wave data, and the calculation of shear (Vs) and compressional (Vp) wave velocities during the cone penetration ...
-
Manufactured by Geospace Technologies Corporationbased in USA
Geospace Technologies manufactures advanced multi-component ocean bottom seismic recording systems featuring scalable system architecture enabling ten of thousands of channel-count recording capability. The system may be configured for permanent reservoir monitoring or retrievable acquisition. Our OBC systems set new standards for subsea reservoir characterization and ...
-
Manufactured by Geospace Technologies Corporationbased in USA
The OBX-150 has the longest, single acquisition duration of the OBX family. These nodes can be deployed in depths exceeding 3,400 meters with continuous recording for up to 150 ...
-
Manufactured by Geospace Technologies Corporationbased in USA
The OBX-60 has an advantage of being a small, lightweight, deep water node. These nodes can be deployed in depths exceeding 3,400 meters with continuous recording for up to 60 ...
-
Manufactured by Geospace Technologies Corporationbased in USA
The OBX-90 is designed for extended duration seafloor seismic data acquisition. These nodes can be deployed in depths exceeding 3,400 meters with continuous recording for up to 90 ...
-
based in CANADA
Rocky Mountain Soil Sampling has recently acquired a Rossfelder Underwater Electrical Vibracorer. Working from a suitable boat, this system can be used in water over 100 feet deep to collect continuous core samples. Cores barrels are three or four inch diameter and can be up to twenty feet long depending on your application. Several choices in core barrel materials are available including ...
-
based in CANADA
The 3DSS Sidescan Sonar employs patented Computed Angle-of-Arrival Transient Imaging (CAATI) to overcome many of the limitations inherient to traditional interferometric systems. This technology takes advantage of multi-channel phased transducer arrays developed in house, along with proprietary signal processing methodologies to resolve multiple simultaneous backscatter arrivals in real time. ...
-
based in CANADA
Utilizing the CAATI methedology, each backscatter arrival is given a range and angle value relative to the sonar head. These raw data points can then be visualized in a point cloud display, resulting in a geometrically correct 3D representation of a standard 2D side scan image. This point cloud can be rotated and manipulated to provide 3D views of object geometry in side scan imaging detail. This ...
-
Manufactured by Sea-Bird Scientific - Veraltobased in USA
The Thetis Profiler is a submersible vertically profiling platform for use in coastal marine and fresh water environments. The purpose of the platform is to sample the water column distributions of physical, biological, chemical and optical properties at a fixed geographical location over extended periods of time. The system provides sub-meter scale vertical resolution of these properties from 1- ...
-
Manufactured by A.G.O. Environmental Electronics Ltd.based in CANADA
Our gunwale-mount wire counter sheave is a magnetically-encoded sheave system designed for use with our standard EWC-6 electronic wire counter display ...
-
Manufactured by Williamson & Associatesbased in USA
Our latest drill system, the ROCS (Remotely Operated Core Sampler), is designed to be mounted on a work class ROV, making this tool one of the most flexible and economic ways of obtaining deep sea core samples. ROCS core drills have been used in the exploration of cobalt-rich ferromanganese crusts, seafloor massive sulfides and other seabed mineral deposits. The system is ideal for recovering ...
-
Manufactured by Williamson & Associatesbased in USA
The A-BMS is a remotely operated seafloor coring system that uses wire-line drilling technology to drill deeper, faster, and with higher core recovery than conventional drilling methods. The magazine holds the drill tools, rods, and casing and can be adapted to accommodate tools that can core up to 150 m. Our wireline systems have been used extensively in the Bay of Bengal and Western Pacific ...
-
Manufactured by Williamson & Associatesbased in USA
The standard BMS configuration uses conventional coring techniques along with a rotary magazine to obtain 20-30m of core samples from the substrate. Rated to depths of 6000m, the BMS set the world record for coring at depth (5815m) in 2006. The capability and portability of remotely operated coring systems makes them a cost-effective alternative to drill ships for detailed sampling of the upper ...
-
Manufactured by Williamson & Associatesbased in USA
The BMS (Benthic Multi-coring System) series is a product family of remotely operated robotic seafloor coring systems. BMS seafloor drills have a proven track record spanning decades and can be customized to the specific needs of the client. Our offerings include wireline and conventional rock coring systems with complete telemetry, hydraulic and electrical power solutions. These systems can ...
-
Manufactured by VideoRay LLCbased in USA
The Mission Specialist Navigation Package allows for a higher level of autonomous control. The package integrates a Doppler Velocity log (DVL) which locks onto and tracks the ROV’s position along the sea bottom. The DVL estimates distance traveled and calculates the current position with simple “dead reckoning” navigation. A GPS antennae is used to correct the vehicle’s ...
-
by TCartabased in USA
To help organizations understand and track changes in coastal habitats over time, TCarta offers a seafloor classification products derived from high resolution multispectral and hyperspectral satellite imagery. The solution categorizes seafloor elements into classes – including coral, sea grass, mangroves, dredged areas, unconsolidated sediments, and substrate – to produce highly ...
-
Manufactured by Dam-It Dams, Inc.based in USA
Cofferdam can be defined as an enclosure built within a body of water. They are constructed to make it possible for that enclosed region to be pumped out. The area that is pumped out creates a dry environment which allows for work to kick off. These enclosed cofferdams are commonly used in the construction or repair of bridges, oil platforms, pipelines, river crossings, flooding, etc. and other ...
-
Manufactured by Seafloor Systems, Inc.based in USA
The SeaROVr is a Seafloor's Remotely Operated Vehicle (ROV) package designed to dive underwater carrying various survey and inspection payloads. The rugged submersible provides high-end performance at the price of typical basic-level platforms. Modular connection points allow users to attach desired equipment add-ons to suit the observation mission. The SeaROVr platform is ideal for search and ...
-
Manufactured by Seafloor Systems, Inc.based in USA
The SeaTilt is a precision Inclinometer housed in a ruggedized waterproof enclosure. The unit was designed and built specifically for angle measurement of booms and suction pipes extending from dredging ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you