Sea Bottom Equipment For Water And Wastewater Near New Brunswick
-
Manufactured by A.G.O. Environmental Electronics Ltd.based in CANADA
Our gunwale-mount wire counter sheave is a magnetically-encoded sheave system designed for use with our standard EWC-6 electronic wire counter display ...
-
based in USA
A new hybrid system combines Aqua Survey-modified EM-61 high-powered Tx/Rx coils, Aqua Survey underwater monitors and Geonics’ EM-61 consoles with precision positioning/tracking equipment. Combining new with proven equipment brings the detection force of state-of-the-art high-powered Geonics equipment to the seafloor. It provides the diver real-time target response data, the ability to ...
-
Manufactured by Matcor, Inc.based in USA
Structures submerged in water are subject to the damaging effects of corrosion around the clock. Reliable cathodic protection can extend the life of these structures by decades.MATCOR’s Sea-Bottom Anode is a complete, ready to install marine anode sled including the anode cable and protective housing. The Sea-Bottom Anode is quick and easy to install for cathodic protection of docks, piers, ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, standard set for sampling particles larger than 50 mu. Applicable in velocities till 2.5 ...
-
by ConeTecbased in CANADA
All ConeTec cones and data acquisition systems are built seismic ready. The addition of geophones in the CPTu body enables the collection of seismic wave data, and the calculation of shear (Vs) and compressional (Vp) wave velocities during the cone penetration ...
-
Manufactured by VideoRay LLCbased in USA
The Mission Specialist Navigation Package allows for a higher level of autonomous control. The package integrates a Doppler Velocity log (DVL) which locks onto and tracks the ROV’s position along the sea bottom. The DVL estimates distance traveled and calculates the current position with simple “dead reckoning” navigation. A GPS antennae is used to correct the vehicle’s ...
-
Manufactured by ThayerMahan, Inc.based in USA
Synthetic aperture sonar for understanding what goes on beneath the waves. Developed in the 1950s, synthetic aperture radar mounted on reconnaissance aircraft provided the U.S. Military with imagery that was stunning in its detail. Twenty years later, this concept was applied to a new generation of space-based platforms capable of monitoring the Earth from hundreds of miles away with a level of ...
-
Manufactured by SyQwest Incorporatedbased in USA
The AquaScan HD is a portable high-resolution, precision side scan sonar. It is designed exclusively for shallow water seafloor surveys up to 250 meters of slant ...
-
Manufactured by Raytheon Technologies Corporationbased in USA
The U.S. Navy's standard for minehunting, the AN/AQS-20 is an advanced minehunting sonar system that has been designated as the minehunting sonar for the Littoral Combat Ship's mine countermeasure mission package. The AN/AQS-20 incorporates four separate sonars in a compact, lightweight and hydro-dynamically stable towed body. It uses state-of-the-art imaging sonars, signal processing and ...
-
Manufactured by EdgeTechbased in USA
Building on the success of the popular 6205 system, EdgeTech has redesigned the 6205s in a smaller, lighter package with additional features and functions that are sure to make on-water survey operations even more effective and efficient. The 6205s is the only bathymetry system to now offer EdgeTech’s motion tolerant side scan sonar feature for operation in more adverse weather conditions. ...
-
Manufactured by EdgeTechbased in USA
The EdgeTech 2200 and 2205 are compact, extremely flexible and configurable sonar system for integration on 3rd party underwater vehicles. They are specially designed for installation and use on Unmanned Underwater Vehicles (UUVs / AUV), Remotely Operated Vehicles (ROVs), Unmanned Surface Vehicles (USVs), and other hosted platforms. This modular unit can be configured, based on the ...
-
Manufactured by EdgeTechbased in USA
The new 2300 combines EdgeTech’s highly successful line of side scan sonars, subbottom profilers and MPES bathymetry into one fully integrated ...
-
Manufactured by EdgeTechbased in USA
Building on the long running success of the EdgeTech sub-bottom profiler product line, the EdgeTech 3400 provides users many enhancements to current sub-bottom profiler systems. The 3400 is a wideband Frequency Modulated (FM) sub-bottom profiler utilizing EdgeTech’s proprietary Full Spectrum CHIRP technology. The system generates high resolution images of the sub-bottom stratigraphy in ...
-
Manufactured by Ocean Imaging Systems, A Division of EP Oceanographic, LLCbased in USA
The Ocean Imaging System (OIS) Sediment Profiling Camera has evolved from the original Model 3731 sediment camera designed at Benthos in the early 1980’s with a 4000 meter depth rating. The original camera was developed in cooperation with Dr. Donald Rhoads and Dr. Joseph Germano who pioneered Sediment Profile Imaging (SPI) at Yale ...
-
Manufactured by EOM Offshore, LLCbased in USA
Due to its design, the Stretch EM Cable isolates the ocean's rough conditions from the rest of the mooring through millions and millions of cycles, while simultaneously providing a stable and quiet platform for oceanographic instruments. The Stretch EM Cable's watch circle is minimal, eliminating the risk of the mooring line becoming entangled with itself, getting snagged by approaching vessels, ...
-
Manufactured by EOM Offshore, LLCbased in USA
The electromechanical universal joint provides a robust electrical and mechanical connection point for electromechanical riser elements. In return, electrical failure is reduced and the quality of data measurements from subsurface instruments is assured. ...
-
Manufactured by EOM Offshore, LLCbased in USA
The Multifunction Node-Marine Recovery System (MFN-MRS) has customizable configurations for multiple seafloor instruments and functions as a power and communications node that can integrate with existing seafloor power grids and communication networks. This configuration ensures the delivery of power and real-time data directly to the shore via a bottom cable or via surface buoy. It is designed ...
-
Manufactured by EOM Offshore, LLCbased in USA
The LP-MRS is placed in a vertical configuration with subsurface flotation attached above, and the recoverable asset attached below. Once the release command is received and the release is dis-engaged, the synthetic line is freed. The line wound onto the metal frame is roughly two times the water depth where the mooring is located. This extra line simplifies retrieval in areas where there can ...
-
Manufactured by Klein Marine Systems, Inc.based in USA
The Klein System 4900 is a versatile Side Scan Sonar that can be used for many different survey, search and recovery applications. The high fidelity, high-definition imaging abilities and the portability of the System 4900 make it an ideal tool for Search and Recovery (SAR) missions while its rugged construction, selectable frequencies and 300 m operational depth rating provide superb ...
-
Manufactured by Teledyne Optech Incorporatedbased in CANADA
The most powerful airborne coastal and marine mapping system on the market just got better. Optech CZMIL Nova is not only the most capable airborne bathymetric mapping system available today; it is also the most efficient. With a powerful yet more efficient laser, it maps deeper while flying higher, reaching depths of 80 meters in clear waters. The enhanced design and automated processing tools ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you