Seawater Quality Equipment For Water And Wastewater Available In Saskatchewan
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
CTD-Diver for measuring and recording groundwater level/ temperature/conductivity. Memory for 48000 measurements. Conductivity 0-120 mS/cm, compensation temperature 0 till +50 °C. Measuring range 10 m. Accuracy EC 1% of the measured value. Housing ZrO2. Warranty 1 ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The Stand-Pipe Multi-Packer System (SPMP) offers both the direct access of conventional piezometers to the observation intervals and the cost advantage of multiple observation intervals in one borehole through multiple packer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
CTD-Diver for measuring and recording groundwater level/ temperature/conductivity. Memory for 48000 measurements. Conductivity 0-120 mS/cm, compensated temperature 0 till +50 °C. Measuring range 100 m. Accuracy EC 1% of the measured value. Housing ZrO2. Warranty 1 ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 8050 pCO, Measuring System is an autonomous analytical system for measuring carbon dioxide in oceanic surface water. The system is modeled after instruments previously built by Craig Neill/University of Bergen. The system may be used on a ship underway or, on a variety of at -sea platforms. The present pCO2 system operates fully ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The Multi-Packer System is a versatile and cost-effective multiple packer system that can already be installed in very small borehole diameters (from 50 ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The Hybrid Multi-Packer System (HMPS) combines the advantages of the Stand-Pipe Multi-Packer System and the conventional Multi-Packer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Robust and durable water level logger with corrosion proof housing. Perfect long term solution for saline environments. Housing is corrosion proof, robust and durable. Available in various measuring ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Standpipe piezometers are used to monitor piezometric water levels. Observation wells are used to monitor ground water ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 8050 pCO, Measuring System is an autonomous analytical system for measuring carbon dioxide in oceanic surface water. The system is modeled after instruments previously built by Craig Neill/University of Bergen. The system may be used on a ship underway or, on a variety of at -sea platforms. The present pC02 system operates fully ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Durable and robust water level and datalogger. Housing is corrosion proof. Conductivity range of 0 to 120 mS/cm. Long-term solution for monitoring saline environments. Available in various measuring ...
-
PremiumManufactured by Myron L Companybased in USA
The unique circuitry of the 750 Series II Conductivity Monitor/controllers guarantees accurate and reliable measurements. Drift-free performance is assured by “field proven” electronics, including automatic DC offset compensation and highly accurate drive voltage. Since temperature compensation is at the heart of accurate water measurement, all Myron L® Monitor/controllers feature ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
High rejections membranes Energy recovery by turbine or pressure exchanger to maximize cost savings. All equipment mounted on stainless steel 304 skid Standard control with RO micro-controller and conductivity display Advanced control with flow, pressure, pH and conductivity transmitters for data monitoring, normalisation and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
CTD-Diver for measuring and recording groundwater level/ temperature/conductivity. Memory for 48000 measurements. Conductivity 0-120 mS/cm, compensated temperature 0 till +50 °C. Measuring range 50 m. Accuracy EC 1% of the measured value. Housing ZrO2. Warranty 1 ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 8000 uses advanced TDLAS technology to detect gas concentrations in an open space by the absorption of specific light wavelengths by gas. The system is designed to keep your personnel safe in high risk environments. It can detect CH4 over distances of 120 meters. ...
-
PremiumManufactured by Myron L Companybased in USA
The advanced “isolated” circuitry of the 720 Series II pH/ORP Monitor/ controllers guarantees accurate and reliable measurements — completely eliminating ground-loop and noise issues. The unique sensor preamp allows for longer distances between the sensor and the Monitor/controller without the loss of accuracy or ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The Pump Multi-Packer System (PMPS) is a conventional multi-packer system with a double-valve pump and pressure sensor installed in the test ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The MPPiS was specially developed for buoyancy measurements of gravity ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This fiber-optic microsensor consist of an optical fiber (230 µm) with a sensor tip diameter of approximately 50-70 µm. ...
-
Manufactured by Theodor Friedrichs & Co.based in GERMANY
The air thermometer type 2520 with double radiation screening is designed for wall-mounting. It consists of an inner hull with a precision thermometer resting in a rubber socket and an outer tube with the radiation-screening covers and the guiding angles for fastening. The knurled-head screw, which constitutes the upper cap of the inner hull, serves at the same time for twisting this hull around ...
-
Manufactured by Jennings Anodes USA Inc.based in USA
The ship’s ballast water tank is subject to galvanic corrosion, especially its internal steel structure immersed in seawater. The only way of preventing corrosion in ballast tank, when coatings become damaged or ultimately break down, is to apply sacrificial anodes. This aluminum tank anode with double cranked rod core is the most common anode types applied in cathodic protection of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you