Secondary Water Equipment For Water And Wastewater Available In Myanmar
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-GATE Flushing Gate System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, as well as sewer inverts, using a single flush. It has been used in CSO, SSO applications and can be used in agricultural and industrial applications ...
-
Manufactured by Water Energy Srlbased in ITALY
The sedimentation treatment plants “by batch” designed and made by Water Energy, of the series WE, have the function of speeding up the separation of sludge derived from the chemical-physical treatment of water by depositing and thickening them on the ...
-
Manufactured by Neron Pumpsbased in ITALY
Features : Feeding : Self priming (up to 5 mt ) or discharge. Calibration: Unloader valve or piloted by-pass valve. Secondary Fluid : Fresh water, SALT WATER Glycole, Chemicals. Water Temperature : Cold or hot water with water by-pass to tank (up to 80° C). Oil Temperature : Max 70 ...
-
Manufactured by Nox Korea Co.,Ltdbased in SOUTH KOREA
Optimized facility for Tunnel waste water treatment. Stable treated water by automatic chemical injection according to influent concentration. Lower maintenance cost by automated operation without maintenance staffs. High efficiency sedimentation tank with maximized sedimentation efficiency by increasing the surface load ratio by installing inclined plates. Sludge thickener and dehydrator are ...
-
Manufactured by Salherbased in SPAIN
WWTP for small populations. The low-load activated sludge treatment plant (extended aeration) with high-efficiency fixed culture CVC-OXIDEP-TC is usually used to treat the water of small towns and is certified according to EN 12566-3 ...
-
Manufactured by Weir Power & Industrial PLC- Trillium Flow Technologiesbased in UNITED KINGDOM
Vertical close coupled, single or multistage turbine pump, with a cast or fabricated discharge head, top mounted motor and closed suction or wet pit design. Floway VTP is a vertical close coupled, single and multistage turbine pump which is suitable for multiple applications in various markets. Various material combinations available for a wide variety of applications. Includes features such as a ...
-
Manufactured by Guddi Plastcon Pvt. Ltdbased in INDIA
Clarification / sedimentation is the most important stage in the field of waste water treatment. The most efficient Sedimentation systems have high settling surface area whilst maintaining a small ...
-
Manufactured by OREGON - a brand of Blount Inc.based in USA
The ICS 890 Series hydraulic cutting system offers the superior strength of FORCE4® technology. From the redesigned, more durable rear handle, to the easy to replace drive sprocket, this saw is engineered to stand up to your toughest jobs. In a package that exceeds industry standards this sleek powerhouse is packed with features designed to make it work as hard as you ...
-
Manufactured by Enviro-Tech Systems (ETS)based in USA
Possessing similar attributes to the Horizontal IGF, the Enviro-Cell Compact Flotation Unit (CFU) – Vertical IGF provides three (3) important phases in oil/water separation while capitalizing on its compact design for reduced space consumption; making this unit perfect for applications where space availability is ...
-
Manufactured by SOFAME Technologies Inc.based in CANADA
The LAUNREC RBT is a complete heat reclaim system which recovers the energy contained in the waste water of industrial laundries and textile dye houses. The recovered energy is used to preheat a secondary water stream to within 8°F (4.5°C) of the waste water ...
-
Manufactured by Raven Lining Systemsbased in USA
AquataPoxy A-6 was developed in the late 70’s and is the most widely specified 100% solids, zero VOC epoxy for potable water structures, with a fast return to service. The A-6 epoxy produces a well-adhered slick, dense surface and minimizes slime growth and bacteria build-up on protected ...
-
Manufactured by Solhutec - a division of GEI Worksbased in USA
OX Aluminum Angle Spill Berms are a great option for any tank, drum, vehicle, or storage device. Featuring a standard wall height of one foot (1'), these berms have aluminum L bracket angles that are inserted into pockets located along the walls of the berm. Brackets are removed as needed to allow vehicles and other equipment to enter the containment ...
-
Manufactured by P2W Ltd.based in ISRAEL
High concentrations of heavy metals are an inevitable and detrimental byproduct of the mining production. P2W guarantees it’s clients to lower the levels of heavy metals and arsenics to regulation approved levels, by both design and ...
-
Manufactured by Neron Pumpsbased in ITALY
Feeding: Selfpriming (up to 5 mt ) or discharge. Calibration : Unloader valve or piloted by-pass valve. Secondary Fluid : Fresh water, Glycole. Water Temperature : Cold or hot water (up to 80°C), water by-pass to tank (by-pass). Oil Temperature : Max 70 °C. Risk : None, Safety devices adopted both oil and water side. Material : Anodized aluminium, stainless steel, brass, special seals. ...
-
Manufactured by Yixing Jianhua Water Treatment Co., Ltdbased in CHINA
It is installed at water inlet of secondary grill and other water intake units where no large particles are in water. It is also can be used for industrial and municipal sewage of industries such as paper mill, textile, leather, wine and sugar making, fishing etc. Chain rotor multi teeth screen waste remover is developed on the basis of advance technology from similar products both at home and ...
-
Manufactured by Neron Pumpsbased in ITALY
Features : FEEDING : Discharge. CALIBRATION : Unloader valve. SECONDARY FLUID : Fresh water, salt water, glycole, chemicals. WATER TEMPERATURE : Cold or hot water up to 60° C. OIL TEMPERATURE : Max 70 ...
-
Manufactured by Qingzhou Yongsheng Dredging Equipment Co., Ltdbased in CHINA
Yongsheng Amphibious Dredger could be used for cutter suction, digging, reclamation, desilting, clean weeds, piling and ect, which is suitable for shallow water, such as coastal, lake river, city river, reservoir and industrial sedimentation ...
-
Manufactured by Airex Industries Incbased in CANADA
Airex is working on creating the next generation of wet dust collector. Our experienced team of engineers have created a unit that is unsurpassed in quality and offers the highest efficiency rates in the industry. The unique core and polypropylene impinger puts us way ahead of our competitors for maintenance and ease of operation. Because our controls are simple and state-of-the-art, using our ...
-
Manufactured by EnviroSep Incbased in USA
Envirosep WWDS-HTS, Wastewater Digester Sludge Heating System is a UL-Listed, factory manufactured and tested system used in biological wastewater treatment plants for maintaining sludge temperature in the anaerobic digester. The indirect heating method is employed, with a sealed-in primary water circuit, combined with an internal heating coil eliminates corrosion, scaling, and sludge baking. ...
-
Manufactured by ECOTEC, Ecología Técnica, S.A.based in SPAIN
Lamella settling is technology that has been successfully tried and tested to optimize the sedimentation process in a wide range of applications worldwide. ECOTEC has been using this technology for over 25 years, and thanks to its commitment to incorporating continuous improvements, ECOTEC provides solutions that ensure the most efficient lamellar ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you