Sedimentation Equipment Equipment For Water And Wastewater In USA
-
ShowcaseManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita’s S.sensingTM CS technology offers innovative equipment to control the product dosage in industrial wastewater treatment systems. This state-of-the-art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs. The advantage of measuring the turbidity between the flocs is that this enables the S.sensingTM CS ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-GATE Flushing Gate System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, as well as sewer inverts, using a single flush. It has been used in CSO, SSO applications and can be used in agricultural and industrial applications ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 Bubble GunIM systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
PremiumManufactured by AMS, Inc.based in USA
Stops caving sediment! Use this manually-driven sampler for discrete interval sediment sampling in rivers, lakes, wetlands, and estuaries. To obtain a sample, the sampler is lowered to the surface as a dual tube or driven down to the desired depth where sampling is to begin below the surface. Upon reaching the desired sampling depth, the inner rods attached to the internal drive tip are retracted ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
TUBEdek Lamella Clarifiers, also called tube settlers, are used for solids removal (sedimentation processes) in water and sewage treatment. TUBEdek can be used in rectangular and in circular ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-TIP tipping bucket is a sediment flushing system designed to remove settled debris from reservoir floors, such as stormwater or CSO retention tanks and sanitary equalization tanks. The system operates by releasing a torrent of fresh water stored in the tipping bucket. The resulting flushing wave progresses down the entire length of the flushway pushing the settled debris ahead of it. The ...
-
PremiumManufactured by Raven Environmental Products, Inc.based in USA
The Raven SID-20200 Sludge Interface Detector, that replaces model SID-10200, is a portable handheld instrument that accurately determines the sludge blanket solid/liquid interface depth in primary tanks, clarifiers, sedimentation basins, lagoons and a wide variety of tanks with settled sludge and ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
The SK tank series offers a range of compact, ready-to-connect units for separating solids from liquids. The sedimentation process in these units is based on the proven counter-flow principle. They are available in different sizes with settling areas of 2 - 72 m2 and flow rates of 2 - 70 m3/h for usual sedimentation tasks. SK tanks can be installed easily and quickly. The innovative circular ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 ORD Bubble Gun systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
SKS SKS lamella clarifiers are compact, ready-to-connect units for the separation of solids from liquids. They work according to the tried-and-tested counter-flow principle. Thanks to our TUBEdek lamella packs, the removal efficiency of the SKS separators is extremely high. The individual SKS lamella clarifiers modules with sedimentation surfaces from 18 m2 to 33 m2 can easily be connected in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Discharge and partitioning system for sediment core sampler type Beeker. For connection to the mains drinking water network. Exclusive tripod. Inclusive tube holder, 9 rubber stops and lipped rings, insertion plate, pressure tube with clamp plug and tubes, sealing spatula, caps and rubber ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
SKR sedimentation tanks offer ready to connection units for sedimentation of solids out of liquids by the out-standing sedimentation properties of the TUBEdek lamella ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
The SedVac system features an innovative design capable of maintaining flow rates while resisting clogs. It handles heavy sediment and grit that traditional vacuum pipe systems leave behind, increasing plant capacity with minimal structural changes. The SedVac Sediment Dredge System is a sediment removal system designed to clean your clarifier by effectively removing the compression zone layer of ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
The separation of sludge in recirculation aquaculture systems can be enhanced and made more economical with the TUBEdek lamella separators. A TUBEdek installation results in a plant with a smaller foot print compared to more traditional methods of ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Conical temporary strainers provide a cost-effective solution for protecting downstream equipment from sediment and debris during pipeline start-ups and commissioning. Available in a wide variety of sizes, materials, and configurations to meet your specific needs. Designed for easy installation between piping flanges. ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-DRUM Pivoting Drum System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, using a single flush. It has been used in CSO and SSO applications and can be used in agricultural and industrial applications to clean any batch ...
-
Manufactured by WesTech Engineering, LLCbased in USA
The ZICKERT Shark™ Bottom Sludge Scraper has over 3,000 installations all over the world, 90 percent of which are retrofits. It is designed for continuous sludge transport and performs well in all sedimentation processes, including grit ...
-
Manufactured by Madden Engineered Products LLCbased in USA
The Madden Orifice Meter gives the boiler operator precise repeatable control of the continuous blowdown flow rate. This boiler blowdown valve utilizes 17 different hole sizes which are drilled in the stainless steel orifice plate. Each hole is precision drilled to a diameter that will produce the flow shown on the flow chart, see pages 3 and 4. By selecting a larger hole the continuous blowdown ...
-
Manufactured by Leopold - a Xylem Brandbased in USA
Xylem’s Leopold Clari-DAF system is a clarification technology for the pretreatment of rapid gravity and membrane filter feed water. It’s a highly-effective, proven technology for removing low-density particulates found in lakes and reservoirs, which are problematic for typical sedimentation systems. The Clari-DAF system excels at removing filter clogging algae and precipitated solids ...
-
Manufactured by SpectraPure Inc.based in USA
SpectraPure Basic RO 90 GPD Compact RO System is our low cost alternative to our DWS and MaxPure RO Standard Systems. They take up very little space, are highly portable, and can produce pure water from almost any water source. From Apartment to House, Garage to Garden Hose, this compact system is perfect for any budget, and any size household. SpectraPure Basic RO 90 GPD Compact RO System comes ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you