Sedimentation Tanks Equipment For Water And Wastewater In Ontario
-
PremiumManufactured by Flottweg SEbased in GERMANY
Full power with reduced energy consumption. Decanter centrifuges for sewage sludge and waste water applications. The demands on the quality and efficiency of sewage treatment plants are growing from year to year, not least due to rising energy and disposal costs. As a result, using decanters to dewater sludge means using state-of-the-art technology. The C-series decanters from Flottweg achieve ...
-
Manufactured by River Birch Biodisk Inc.based in CANADA
Our systems use a natural process for the treatment of wastewater utilizing RBCs. The process meets or exceeds effluent requirements as specified by regulatory agencies. The process has many inherent operational characteristics that make it ideally suited for the treatment of domestic wastewater. Our systems discharge to: Sub-surface and surface absorption components, Surface waters, Intermittent ...
-
Manufactured by Statiflo International Ltd.based in UNITED KINGDOM
A non-ragging static channel mixer for dosing additives into wastewater including raw sewage. The Statiflo NRC Mixer has been designed specifically for P removal applications but can equally be used on any chemical dosing service on raw sewage where non-ragging properties are essential. It has a unique variable geometry custom designed for the widest range of wastewater velocities and channel ...
-
Manufactured by Ecodyne - Marmon Industrial Waterbased in CANADA
Ecodyne’s Reactivator-Clarifier is suitable for higher flowrates. This is a solids contact unit and design includes flash mixing, softening / flocculation and sedimentation in a single tank. Units are field-erected from quality pre-fabricated shop ...
-
Manufactured by Napier-Reid Ltd.based in CANADA
Custom engineered to provide effective water and wastewater sedimentation. Napier-Reid’s clarifiers provide a size and type to fit any plant requirement. The application-oriented design assures an economical performance for municipal or industrial water and wastewater treatment. Sedimentation tanks or conventional gravity clarifiers are used in water and wastewater treatment as a physical ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens immersion sensor for sedimentation tanks in water, wastewater and utilities. Turbimax CUS71D continuously monitors the separation and transition zones in clarification and settling tanks, ensuring safe, economic and efficient sedimentation processes. It provides you with reliable, real-time measured values in real-time for quick control of valves and actuators. Turbimax CUS71D is ideal ...
-
Manufactured by Trucentbased in USA
The CentraSep S-Series Centrifuge: High-Performance Two-Phase Solid/Liquid Separation. Given enough time, every solid will eventually fall out of suspension. But “enough time” can be days, months—even years. There are many different styles of centrifugal separation equipment to consider: screen/scroll centrifuges, large horizontal decanter centrifuge, tubular bowl centrifuges, ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Products for reliable sludge level measurement in sedimentation tanks. Sludge level sensors and transmitters help you to pump sludge, not water. They continuously monitor the separation and transition zones of the clarification and settling phases, so that you can operate your process efficiently. Typical installations are at the primary and secondary clarifier of wastewater treatment plants to ...
-
Manufactured by Canamidex International Corp.based in CANADA
With worldwide rising awareness for the protection of our environment, requirements for waste water treatment are increasing, to that point of view Canamidex offers a strong product portfolio in optimal wastewater treatment systems customized to satisfy specific needs for a project. Whether the factors governing project requirements are process or regulatory, Canamidex provides the products and ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The low profile TRAC-VAC sludge collector is ideally suited to remove accumulated solids from sedimentation basins, regardless the flow rate or deposit patterns. It can clean areas up to 25' wide and 200' long. The pneumatic drive assembly is programmable, offering flexibility for determining the speed and frequency of ...
-
Manufactured by Markland Specialty Engineering Ltd.based in CANADA
Markland’s simple and effective single point monitoring and automatic control to maintain your preferred sludge blanket and supernatant interface ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement in slight to heavily polluted media. Wedge shape for installation on channel wall or channel ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For ultrasonic flow measurement of slight to heavily polluted media in part filled an full pipes and channels. Complete measurement system in connection with KDA ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-FLOAT Floating Regulator System is designed to maintain a constant and accurate flow from a minimum of 80 gpm (5 L/s) to a maximum of 480 gpm (30 L/s) for upstream water levels varying from 0 to 20 feet (6 m). The SURE-FLOAT Floating Regulator has been used for flow control from settling ponds, tailings ponds, sedimentation tanks, storm water detention tanks, reservoirs and basins as ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
In continuous solid/liquid separation, Krauss-Maffei pusher centrifuges combine high availability with minimum maintenance and reduced specific space requirement. They enable effective dewatering of fast filtering products at high throughput rates. The quality of the final product can be increased using a variety of washing modes. Krauss-Maffei pusher centrifuges are applied in many fields of ...
-
Manufactured by WesTech Engineering, LLCbased in USA
WesTech is well known for providing top-quality process equipment for industrial and minerals liquid-solids separation. WesTech stands behind their equipment, which has proven to meet the toughest of requirements. The WesTech drive unit has helped earn this ...
-
Manufactured by Fujiwara Industry Co., Ltd.based in JAPAN
This is a sludge collector with a simple structure and a different concept to the methods that have been the mainstream up to now. Collecting flights equipped with scraping blades are placed on the center rail attached to the bottom of the sedimentation tank and driven back and forth by a drive unit via a link chain. During scraping, the scraping blades are set vertically, and during return they ...
-
Manufactured by WesTech Engineering, LLCbased in USA
The efficient design of the SuperSettler™ inclined plate clarifier utilizes lamella plates and shallow depth sedimentation to minimize the clarifier footprint. Pioneered by Nordic Water Products, the SuperSettler is available in both inclined plate packs and stand-alone settler ...
-
Manufactured by WesTech Engineering, LLCbased in USA
The ZICKERT Shark™ Bottom Sludge Scraper has over 3,000 installations all over the world, 90 percent of which are retrofits. It is designed for continuous sludge transport and performs well in all sedimentation processes, including grit ...
-
Manufactured by WesTech Engineering, LLCbased in USA
The General Filter CONTRAFLO® clarifier is a true solids contact clarifier that combines mixing, flocculation, and sedimentation in a single basin. Innovative when it was introduced in 1950, the CONTRAFLO is still the finest conventional clarifier on the market. CONTRAFLO Solids Contact Clarifiers employ a number of well-established treatment principles resulting in efficient water treatment in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you