Semiconductor Wastewater Equipment For Water And Wastewater Available In Austria
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
Committed to protecting the environment, conserving resources and to meeting new manufacturing challenges as they occur, Ovivo has developed a state of the art semiconductor wastewater treatment process designed to meet current and future reclaim and discharge ...
-
Manufactured by SCHMITT-Kreiselpumpen GmbH & Co. KGbased in GERMANY
In the T Pump Series, the motor power is transmitted vertically to the pump impeller through an extended shaft. This rotating shaft is exclusively supported through the two motor bearings and therefore runs completely contact free and abrasion-free inside the housing. Due to the design, the use of bearing and shaft seals can be ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
Fab shops require large volumes of ultrapure water (UPW) and use chemicals during the fabrication of semiconductor devices, generating large volumes of wastewater, which must be reclaimed. Specially designed reclaim systems help reducing the effluent waste discharge, as well as minimizing the raw water needed for the production of UPW while protecting the environment. Ovivo technology is ...
-
Manufactured by Marquest Scientific, Inc.based in USA
Marquest Scientific's complete line of Laboratory Turrets are engineered to provide point-of-use access to many laboratory fluids including Distilled, Deionized, Pharma Grade, RO, and Ultra Filtered water as well as common laboratory gases and chemicals. The design of all injection molded components offering the most rugged construction in the industry. ...
-
Manufactured by Jelight Company Incbased in USA
The most versatile UV, VIS, and IR datalogging optometer available on the market today. The JLT1000 design is backed by a number of years of light measurement experience and comes complete with NIST traceable, ISO 17025 accredited calibrations. The JLT1000 was designed with customer configuration in mind and can easily accommodate most solid-state detectors, 1/2” and 1” optical ...
-
Manufactured by RKI Instruments, Inc.based in USA
Built around RKIs latest smart sensor technology, the SC-01 is a versatile single toxic gas monitor. The smart sensors are interchangeable, with the SC-01 automatically recognizing any sensor change without any set up or configuration changes. The sensors calibration information also stays with each sensor. Weighing only 7.6 ounces, it has many features which set it apart from the competition. ...
-
Manufactured by Carbochem Inc.based in USA
Carbochem offers a full line of Ion Exchange IonPlus™ Resins: cations, anions, mixed bed, separation, chelating and adsorbent. Resins can be tailor made to meet a customer’s specific requirements. Technical support and analytical services are available. High quality resins offered at a competitive pricexchange Resins (cation, anion, mixed bed & selectives) with applicability in ...
-
Manufactured by Refractron Technologies Corpbased in USA
Refractron specializes in porous parts made from alumina, and silicon carbide (SiC) that are often used as fine bubble diffusers, wicks, and filters with pore sizes from approximately 0.1 to > 1000 microns. These products are specified because they offer efficient, durable, smart solutions to customers in a variety of applications including dewatering minerals, manufacturing semiconductor ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The innovative SiC Ceramic Flat Sheet Membrane is intended for reducing high concentration of hydrogen peroxide (H2O2) present in the effluent down to levels suitable for safe operation of downstream Reverse Osmosis. The process involves dosing of catalyst based on Manganese (new Ovivo – Chemical formulation product: Ovivo-Persol™) for catalytic decomposition of H2O2. The stream with ...
-
Manufactured by Marquest Scientific, Inc.based in USA
Materials of Construction: PVC, CPVC, Polypropylene & PVDF. Port Connections: 1/4", 3/8", & 1/2" Fem NPT and Solvent Socket "Slip". Universally adaptable to pipe and tube. Marquest Scientific Throttle Master Needle Valves provide precision flow control of corrosive and high purity fluids. Operating pressures and flow rates up to 220 PSI and 12 GPM respectively. There are no elastomers, ...
-
Manufactured by Marquest Scientific, Inc.based in USA
Marquest Scientific’s complete line of TUFF GUARD gauge and instrument isolators are engineered to provide total isolation of all instruments from corrosive and ultra pure fluids while offering a design with the most rugged and complete features in the industry. Available with or without an instrument installed. A broad selection of body and diaphragm (sensing element) materials to choose ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Clear containment system allows for easy detection of leaks and eliminates the risks associated with piping aggressive chemicals ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you