Settlers Equipment

88 Results found
Only show results in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Settlers ×

Kimre - Model Liqui-Nomix - Liquid-Liquid Separators

by Kimre, Inc.     based in Homestead, FLORIDA (USA)

Liquid – liquid mixtures must be settled and coalesced before they can be separated. Gravity Settlers or decanters can be either horizontal or vertical vessels designed to continuously settle, coalesce, and withdraw settled liquids. Cyclones and centrifuges have also been used for separating liquid/liquid mixtures by enhancing the settling ...

Plate Settlers

by Jim Myers & Sons, Inc.     based in Pineville, NORTH CAROLINA (USA)

Highly efficient, easy to maintain, economical, and built for a lifetime of service, these 100% stainless steel systems are designed and constructed by JMS professionals with decades of experience in the sedimentation and flocculation industry. Our reputation for the highest-quality fabrication is recognized throughout America and our designs are ...


To-and-Fro Bridge, Sand Collector, Oil Remover

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The to-and-fro bridge sand collector, oil remover has the function of conveying the material (sludge, sand, etc.) on the bottom of the tank, through the sludge scraper blades, to a storage hopper and hence it is extracted by a system not supplied by Friulana Costruzioni. At the same time, the foaming blades convey the suspended solids (light and ...

Inclined Plate Settler Package Units

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Inclined plate settler package units reduce plant footprint by 90% compared to conventional clarifier plants.

Model 2H KLP - Tube Settlers

by GEA 2H Water Technologies Sp. z o.o.     based in Sosnowiec, POLAND

Tube settler for effective sedimentation of solids: large specific surface area; high mechanical resistance; easy to assemble; made of material resistant to chemical substances and UV radiation.

Model LSM 40 - Lamella Settler Module

by Refill-Tech S.r.l.     based in Biassono (MB), ITALY

LSM 40 (Lamella Settler Module 40 mm) is a lamella pack obtained by the assembly of PVC thermoformed sheets with a parallel channel design.This product is also available in a crossed channel design ( please refer to TFM 27 data sheet)

Chain Sludge Scraper Bridge

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The chain sludge scraper bridge consists of a support structure anchored at the two sides of the tank that support four shafts and the chains, which are fixed to vanes that scrape the bottom and collect the suspended solids. In particular, the four shafts are arranged in rhomboidal section and fixed to the walls of the rectangular steel ...

Defender - Model DCL Series - Lamella Settler

by Toro Equipment S.L.     based in La Cistérniga, SPAIN

Lamellar settler is designed for the continuous separation of sediments from water and they have two basic purposes: to increase the settling area and to obtain a laminar flow.

MRI - High-Capacity Inclined Plate Settlers

by JBI Water & Wastewater     based in El Dorado Hills, CALIFORNIA (USA)

Plate Settler System Provides Even Distribution and Low Turbidities. MRI’s Plate Settlers provide even distribution across the entire inclined plate settler system with a patented hydraulic flow control deck, making the system the most efficient plate settlers available.

Lamella Settlers

by Stetfield Separators Ltd.     based in Penryn, UNITED KINGDOM

Primary wastewater solids settling and thickening via inclined parallel plates and bottom sludge-cones in sizes up to 100m3/h.

MRI - High-Capacity Inclined Plate Settlers

by Meurer Research, Inc. (MRI)     based in Golden, COLORADO (USA)

Plate Settler System Provides Even Distribution and Low Turbidities. MRI’s Plate Settlers provide even distribution across the entire inclined plate settler system with a patented hydraulic flow control deck, making the system the most efficient plate settlers available.

To-and-Fro Bridge with Pumps

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The to-and-fro bridge with pump has the function of extracting the material (sludge, sand, etc.) on the bottom of the tank through the pumps and of conveying it to a reinforced concrete discharge channel. Hence, the residues are extracted with a system not supplied by Friulana Costruzioni. At the same time, the foaming blades convey the suspended ...

Sludge Scraper Bridge

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

Sludge scraper bridge: Under the effect of the slow and continuous rotation, the sludge scraper bridge conveys the decanted sludge through the sludge scraper blades to a central tank at the bottom of the basin and hence, extracted through systems like immersion pumps, telescopic valve, spillway, etc. The sludge scraper bridge can also be fitted ...

To-and-fro Bridge with Scraper Vanes

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

To-and-fro bridge with scraper vanes: The to-and-fro bridge with scraper vanes must be mounted in the rectangular sedimentation tanks. Its function is to convey (in delivery) the materials deposited on the tank bottom (such as sludge, sand, etc.) to a special reinforced concrete basin through the sludge scraper blades. In return, it conveys the ...

Lamella - EcoFlow

by Entech Environmental and Industrial Equipment     based in Laguna Niguel, CALIFORNIA (USA)

The Lamella is the original inclined plate gravity settler. Introduced by Parkson in 1971, it has been the industry standard for this technology.Inclined plate settling works by having a solid/liquid stream that has been flocculated enter a tank and flow upward between a pack of inclined plates.  The solids fall to the plate surface, where ...

Central Drive Sludge Scraper Bridge

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The central drive sludge scraper bridge is a machine fitted with a central shaft with arms and scraper blades that rotate in clockwise direction and thus convey the debris (sludge, etc.) towards the middle of the reinforced concrete tank, from where they are extracted by a system such as immersion pumps, telescopic valve, spillway, etc. On ...

Lamella - EcoFlow

by Parkson Corporation     based in Fort Lauderdale, FLORIDA (USA)

The Lamella is the original inclined plate gravity settler. Introduced by Parkson in 1971, it has been the industry standard for this technology.Inclined plate settling works by having a solid/liquid stream that has been flocculated enter a tank and flow upward between a pack of inclined plates.  The solids fall to the plate surface, where ...

Flocculator Bridge

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

Under the effect of the slow and continuous rotation, the flocculator conveys the decanted sludge through the sludge scraper blades to a central tank at the bottom of the basin and hence, extracted through systems like immersion pumps, telescopic valve, spillway, etc. The flocculator bridge is further fitted with foaming blades arranged on the ...

Sludge Scraper Bridge with Controlled Extraction

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The sludge scraper bridge with controlled extraction is installed on a sedimentation tank with flat and/or inclined bottom. The inlet of the water to be treated and the sludge extraction occur coaxially towards the centre of the tank, through two pipes.

Lamella Settlers for Water Clarification

by Lenntech Water Treatment     based in Delft, NETHERLANDS

Lamella settlers usually come after a physical-chemical treatment to settle particles for water clarification. Our settlers are build in gavanized steel or stainless steel. Feed water max NTU 500, Flow range up to 500 m3/h, Variable angle and plate distance, Automatic de-sludging.

Need help finding the right suppliers?

Let the XPRTs do the work for you