Settlers Equipment For Water And Wastewater Available In Syria
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Brentwood’s blue tubes integrate with our sludge collector systems to provide comprehensive clarification solutions. They are designed to increase treatment capacity without the large footprint and are engineered for maximum structural integrity. Brentwood tube settlers are a cost-effective solution for drinking water and wastewater plants to increase treatment capacity, reduce new ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Flocculators are used for waste or surface water clarification, to optimize particles coagulation and flocculation, prior to settler or DAF. Flocculation can be done in a plug-flow flocculator or in a tank reactor. Our flocculators are build in galvanized steel or stainless steel. Max flow: up to 500 m3/h, Max water turbidity: up to 500 ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Dissolved air flotation systems usually come after a physical-chemical treatment to remove particles that cannot settle fast engouh for optimized water clarification. Our settlers are build in gavanized steel or stainless steel., Feed water max NTU 500, Flow range up to 500 m3/h, Variable angle and plate distance, Automatic ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
TUBEdek Lamella Clarifiers, also called tube settlers, are used for solids removal (sedimentation processes) in water and sewage treatment. TUBEdek can be used in rectangular and in circular ...
-
PremiumManufactured by Devise Engineering S.A.based in GREECE
DEVISE High-Rate Clarifier type “CLARI-TUBE SETTLER” is the ideal solution for many applications requiring Physical-Chemical Separation (Precipitation) in Industrial Wastewater or Municipal Water Treatment. It is commonly used as a primary treatment and can be combined with Coagulation – Flocculation so to improve settlability of light solids and colloidal ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
The plates of settler W-Tank are manufactured by flex molding process. The Flex Molding process is used to obtain reinforced plastic pieces with high glass fiber content, arranged in the direction of the stress, which leads to high mechanical ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Lamellar settler is designed for the continuous separation of sediments from water and they have two basic purposes: to increase the settling area and to obtain a laminar ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lamella settlers usually come after a physical-chemical treatment to settle particles for water clarification. Our settlers are build in gavanized steel or stainless steel. Feed water max NTU 500, Flow range up to 500 m3/h, Variable angle and plate distance, Automatic ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
The separation of sludge in recirculation aquaculture systems can be enhanced and made more economical with the TUBEdek lamella separators. A TUBEdek installation results in a plant with a smaller foot print compared to more traditional methods of ...
-
Manufactured by Hangzhou Nihao Environmental Tech Co.,Ltdbased in CHINA
The Tube Fine Bubble Diffusers increase the oxygen transfer efficiency while decreasing the power consumption to provide the same quality of effluent water. The diffusers can be used to create zones with high oxygen concentrations (anoxic or aerobic), minimal oxygen concentration (anoxic), and no oxygen (anaerobic), offering plant operator a great deal of operational ...
-
based in NETHERLANDS
The Biobed Advanced reactor is the latest technological innovation introduced to the market by Biothane. In the Biobed® Advanced reactor a combination of the excellent performance of the UASB reactor with the cost effectiveness of an EGSB system is made. ...
-
Manufactured by Ablaze Export Incorporationbased in INDIA
The MIXER -SETTLER is a revolutionary new device, which makes phase separation automatic and simple, irrespective of the concentration of two phases (interface height). The mixer-settler is the name given to a type of EXTRACTOR made up of a number of mixing and settling chambers connected alternately in series. In the mixing chambers, optimum mass transfer is achieved by through mixing of two ...
-
Manufactured by EUWA H.H. Eumann GmbHbased in GERMANY
Ultrafiltration is a modern alternative to the clas sical sand and multimedia filters like the reverse osmosis a pressure-driven membrane process. It removes any ki nd of particles from the water. Compared to microfiltr ation it has a smaller pore size and thus holds back bact eria and viruses to > 99.999%. Thus, the ultrafiltration is an effective microbiological barrier. The filtrate is ...
-
Manufactured by Salherbased in SPAIN
The DE-LA lamellar, Salher brand, is a device designed for the continuous settling of suspended sediments transported by wastewater for flows comprised between 5 a 100m3/hour. By installing lamellar modules in the sedimentation chamber, it is possible to increase the effective surface area of settling, which allows to increase the performance of the settler and significantly decreases the surface ...
-
Manufactured by P2W Ltd.based in ISRAEL
P2W OFFERS THE COMPLETE DESIGN, INSTALLATION, OPERATION AND MAINTENANCE OF ITS wastewater treatment SYSTEMS. P2W takes responsibility for process performance and the subsequent compliance to all international and local effluent quality requirements set by the regulator. ...
-
Manufactured by EUWA H.H. Eumann GmbHbased in GERMANY
Ultrafiltration is a modern alternative to the classical sand and multimedia filters like the reverse osmosis a pressure-driven membrane process. It removes any kind of particles from the water. Compared to microfiltration it has a smaller pore size and thus holds back bacteria and viruses to > 99.999%. Thus, the ultrafiltration is an effective microbiological ...
-
Manufactured by AAQUA N.V.based in BELGIUM
Sedimentation-units can be equiped with or without platepacks. The use of plate settlers (model and shape) is determined by different variables such as: The settling rate of the particles. The concentration of suspended solids. The type of sediment. The required effluent quality. The ...
-
Manufactured by Kasravand Co.based in IRAN
KASRAVAND offers a range of crude oil dewatering and desalting technologies that cover most typical processing requirements depending on the salt level required. These include: Free water knock out drums, Heater treaters, Dehydrators, Coalescers, Electrostatic desalters, Degassers. Following primary oil/water separation crude oil still contains residual amounts of water containing unwanted salts ...
-
Manufactured by Salherbased in SPAIN
WWTP for small populations. The low-load activated sludge treatment plant (extended aeration) with high-efficiency fixed culture CVC-OXIDEP-TC is usually used to treat the water of small towns and is certified according to EN 12566-3 ...
-
Manufactured by Bajrang Enviro Engineersbased in INDIA
Bajrang Enviro Engineers bring forth Hexagonal Tube Settler Media to our customers. We manufacture this media with exceptional material using innovative technology. Our quality controllers check the quality of the product as per the standards before we deliver to our clients. This settler is available in various designs and specifications to cater the needs of the customers. Furthermore, one can ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you