Sewage Lifting Equipment For Water And Wastewater Available In Myanmar
-
PremiumManufactured by SRS Crisafulli, Inc.based in USA
Crisafulli Vertical Pumps are dependable, powerful, and versatile. They are designed for stationary applications, such as sewage digesters and lift stations, manure tanks, chemical sumps, and dry docks. Standard Duty Crisafulli vertical pumps are reliable, proven performers. They are equipped with grease lubricated, sealed bearings and are an ideal choice for moving relatively clean water. For ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
With ceramic measuring cell. Application area: The hydrostatic absolute pressure transmitter with ceramic measuring cell is ideal for level measurement of water/wastewater, as well as level measurement in deep wells or in tanks on ships. Maximum cable length = 1000 m. The VEGAWELL 52 is suitable for continuous level measurement of liquids. Typical applications are measurements in water/waste ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For standard measuring tasks, IP66/IP68, Type 6P. Application area: Axial cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval. VEGAPULS C 21 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping ...
-
Manufactured by Jung Pumpen GmbHbased in GERMANY
The WCfix 260 is an easily installed appliance for waste disposal from a toilet above and below (in accordance with EN 12056) the local backup level. They are suitable for the direct connection of a flush toilet with horizontally discharging 6 lt. cistern. In addition, a shower, a washbasin and a bidet can be connected in the same room. The connection of additional facilities (e.g. washing ...
-
Manufactured by Hydropompe Srlbased in ITALY
These series of grinder pumps are particularly used in civil and industrial sewage plants. They have been designed to pump the liquid at high head with very low capacity. The cutter unit, in a special hard stainless steel, cuts into small pieces threadlike materials contained in the liquids. As the risk of clogging is avoided small diameter pipes are used. These pumps can be used to lift the ...
-
Manufactured by Pompe Rotomec Srlbased in ITALY
Submersible electric pumps with vortex impeller. Lifting of sewage, liquids with traces of solids particularly voluminous, fibrous materials and fermented sediments with traces of ...
-
Manufactured by Lianyungang Lianxin FRP Co., Ltdbased in CHINA
The outer main structure of pump is made by filament wound FRP. Fibrace could provive cylinder size DN1000-DN4300, larger caliber could be on-site ...
-
Manufactured by Edson Pumps, Division of the Edson Corporationbased in USA
Edson has assembled a few rugged, high quality sewage lift stations, made up of a submersible sewage pump, a fiberglass reinforced basin, float switches, electrical controls and selected plumbing. These small sewage pumping stations are used in combination with pump out ...
-
Manufactured by Redivacbased in UNITED KINGDOM
The pipework is constructed in a saw tooth profile from High Density Polyethylene (HDPE) jointed using electro-fusion welded couplings and is of a diameter of between 90mm to ...
-
Manufactured by Tianjin Ganquan Group Co., Ltd.based in CHINA
Ganquan brand QJX series downdraft submersible pump is a new type of water pumping equipment independently developed by Ganquan Group. It is widely used in rivers and lakes for water intake; mine water supply and drainage; urban water supply system construction or renovation and various regional secondary water supply systems. The pump is a lower suction type, which can drain the surface water of ...
-
Manufactured by ORPU Pumpenfabrik GmbHbased in GERMANY
Sewage lifting systems. Pressure drainage systems. Domestic, municipal and industrial sectors. Disaster control. Setting tanks and overflow basins. Sewage treatment plants. ...
-
Manufactured by Process Measurement & Controls, Inc. (PMC)based in USA
The PMC VersaLine® VL2000-SW Series submersible level transmitters are specifically designed for use in wastewater, pump/lift station applications. The ceramic capacitive sensing element provides a rugged, open face design which avoids clogging or sludge build up from the material often encountered in wastewater. Designed specifically for the VL2000 the SW2000 provides a "cage" sink ...
-
Manufactured by Process Measurement & Controls, Inc. (PMC)based in USA
The PMC VersaLine® VL2000 Seriessubmersible level transmitters are specifically designed for use in wastewater, pump/lift station applications. The ceramic sensing element provides a rugged flush open face design which avoids clogging or sludge build up from the materials often encountered in wastewater. The stainless steel construction will satisfy most applications, but an option of ...
-
Manufactured by Zenit Europe S.A.based in LUXEMBOURG
Used with unstrained soiled biological wastewaters and sewage and for civil lifting applications. It is thus ideal for wastewater treatment plants, sewer systems, livestock farms, industry and agriculture. The pump is also available in explosion-proof version with ATEX certification. This series is prefitted for installation of the ZENIT cooling system for dry or semi-submerged installation. ...
-
Manufactured by Wastecorp Pumpsbased in USA
4" Connection. Pump up to 735 GPM with 3” solids handling capability. Trash Flow TFCC-4 self priming centrifugal pump is available in bare pump, close coupled, belt driven, piggy back stationary, trailer mounted, skid mounted or lift station ...
-
Manufactured by EFAFLUbased in PORTUGAL
The AMBIBOX sewage pumping stations comprise of collecting tanks built entirely in FRP, guaranteeing water tightness and maximum resistance to corrosion. The collecting tanks are supplied fully equipped with the pumps and all necessary accessories for the proper functioning of the station, installed and tested at our factory, providing maximum operation reliability. Inside the collecting tank, a ...
-
Manufactured by BioLargo Water, Inc.- a subsidiary of BioLargo, Inc.based in CANADA
BioLargo’s Advanced Oxidation System (AOS) combines highly energized iodine molecules with cutting-edge filtration materials to destroy bacteria, reduce BOD, and dismantle soluble organic contaminants. The AOS is eco-friendly and safe, and can be adapted to suit nearly any water or wastewater treatment context. BioLargo Advanced Oxidation System (AOS) – Our flagship water treatment ...
-
Manufactured by Anuabased in USA
The AiraHybrid treatment system is a multi-stage process, designed to combine technologies and achieve greater overall odor removal. The biological and/or adsorption technologies chosen are based on your specific application and overall treatment ...
-
Manufactured by Vaughan Company., Inc.based in USA
Automotive / Steel. Automotive manufacturing and steel mills produce waste solids that plug conventional non-clog ...
-
Manufactured by Pollution Control Systems, Inc. (PCS)based in USA
Sewage lift/pump stations are used for pumping wastewater or sewage from a lower to higher elevation, particularly where the elevation of the source is not sufficient for gravity flow and/or when the use of gravity conveyance will result in excessive excavation and higher construction ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you