Sewage Network Equipment For Water And Wastewater In Australasia
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Discharge measurement via tracer dilution method for sewage - fluorescence. The discharge measurement is performed by using the well-established tracer-dilution method and is especially suitable for big volumes of water. It is used a fluorescent material as tracer. When using the tracer in sewage water most often a continuous insertion of a known amount of tracer is done. Two optical fluorescence ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This small, lightweight mechanical current velocity meter has a measuring range of approximately 0.1 m/sec. to 7.9 m/sec. The meter is used for current velocity measurements in rivers, channels, sewage systems, pipes, etc. Suspended from a wire the meter can be applied at great depth. The meter is balanced in such a way that it will remain in a horizontal position even if the meter for instance ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Electronic flowmeters use magnets to actuate a solid-state hall-effect generator, creating a signal for processing by the 2135 Readout or 2135D - Direct Reading Software or can be used as a mechanical counter. Model 2031H is a standard Electronic Flowmeter. Model 2031HR6 uses a high resolution rotor for low-speed ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Non-contact discharge measurement for open wastewater channels. With the RQ-30 Niro - same as with the RQ-30 - a continuous measurement of the discharge of open rivers and channels is determined. A high quality stainless-steel housing allows the usage even in aggressive waters and wastewater, as for example in sewage, canal systems or industrial facilities. ...
-
Manufactured by Aquate Limitedbased in NEW ZEALAND
Flovac vacuum systems are a cost-effective, environmentally friendly alternative to traditional gravity sewers and low pressure solutions, providing low maintenance, efficient and reliable sewage reticulation. Vacuum systems utilise a central pump station that generate a strong vacuum in a shallow pressure pipe network. Sewage from multiple homes is collected in a series of valve pits before ...
-
Manufactured by Gorman-Rupp Co.based in USA
JC Series portable submersible pumps by Gorman-Rupp are excellent for sewage bypass and other solids-handling applications. These pumps are designed specifically for trash handling and incorporate several engineering features that prevent jamming and clogging, the two most common problems in pumping fluids containing solids. These models feature semi-axial flow impellers have a large free passage ...
-
Manufactured by Clover Pipelines Pty Ltd.based in AUSTRALIA
Our Glass Reinforced Polyester (GRP) jacking pipes offer high axial strength for trenchless micro-tunnelling and relining applications. GRP jacking pipes are typically utilised in the trenchless construction of water and wastewater pipelines. Other applications include road/rail culverts, ducts, asset encasement and pipe relining. ...
-
Manufactured by SARGO s.a.based in BELGIUM
Enviro-Chem is an anti-odors agent available as a liquid solution, acting by neutralization of odors coming from the organically decomposition of solid and liquid waste (H2S, NH3, mercaptans…). It has both neutralizing effect (removal of existing odors) and preventive effect (biomass stabilization, preventing the formation of new odors). Enviro-Chem is always used diluted and is much ...
-
Manufactured by Clover Pipelines Pty Ltd.based in AUSTRALIA
GRP manholes form an integral part of buried gravity sewage and wastewater networks, allowing surface access to the system for pipeline inspection and maintenance. The technically advanced materials and processes used to produce Superlit GRP manholes result in a highly durable, corrosion resistant, and maintenance free structure that's fast and easy to install. ...
-
Manufactured by Redivacbased in UNITED KINGDOM
Sewage flows from the building through normal gravity pipes into the lower section, or wet sump, of the interface valve ...
-
Manufactured by 3Mbased in USA
Resistant to corrosive soils, hydrocarbons, harsh chemicals and sea water. Fast curing for high application productivity. Meets the requirements of AWWA Standard C213 and ...
-
Manufactured by WaStop International ABbased in SWEDEN
The patented Wastop® inline check valve has been the innovator and industry leader since its inception. Wastop excels at preventing backflow, flooding, and sewage odor spread in pipe networks. It can be inserted into almost any existing pipe. Unlike any other check valve available today, Wastop® can be mounted horizontally, vertically, on an inlet, outlet, in a chamber, or utilizing ...
-
Manufactured by Biosolbased in AUSTRALIA
Biosol dosing systems can easily be retrofitted to any existing sewage system. The products are non hazardous and do not require bunding or any costly capital works. Preferably Biosol products and pumps should be stored out of direct sunlight. In above ground pump stations, room for 1 or 2 x 200 litre drums is all that is generally required, however specialized storage cabinets are available if ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Model A106-DL-Air is a compact sewage relief valve that is suitable for high pressures up to 200 psi / 13.8 bar, responds very quickly and retains all the features and benefits of the Model A106-DL Spring–Hydraulic version. It is an attractive solution to what may be otherwise a difficult application due to higher pressures or space height limitations. The Model A106-DL-Air-ET retains ...
-
Manufactured by Mueller Water Productsbased in CANADA
The A106-Dynamic Lifter (DL) sewage pressure relief valve is a direct acting spring loaded relief valve. The valve is adjusted to open when the pressure exceeds the set-point, which is approximately 10% above the normal operating pressure. The valve closes drip-tight when pressure falls below the set-point. The DL is connected on a tee off the main line and usually discharges relief flow back to ...
-
Manufactured by Pure Technologies - a Xylem brandbased in CANADA
Cast iron (grey cast iron) is a historical type of pipe manufactured in the 19th and 20th centuries that is used as pressure pipe for transmission of water and sewage. Cast iron pipe was gradually superseded by ductile iron pipe, which is a direct development, with most existing manufacturing plants transitioning to the new material during the 1970s and ...
-
Manufactured by ERG (Air Pollution Control) Ltdbased in UNITED KINGDOM
Our standard range of water regenerable carbon filters has been specially designed for the Middle East wastewater treatment market. These systems are designed and built to the highest international standards and come with guaranteed odour removal performance. This range unites European technology and quality assurance with local manufacture to provide cost-effective solutions to meet the Middle ...
-
Manufactured by Aqseptence Group GmbHbased in GERMANY
The Airvac valve pit provides the interface between the vacuum collection system and the house. The top chamber houses the Airvac vacuum valve and the bottom chamber is a sewage sump. The two chambers are completely separated from each ...
-
Manufactured by Redivacbased in UNITED KINGDOM
The pipework is constructed in a saw tooth profile from High Density Polyethylene (HDPE) jointed using electro-fusion welded couplings and is of a diameter of between 90mm to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you